01432 610152 Get a quote Call 01432 610152

Roofers in Staunton, near Coleford

Roof repairs and re-roofs for Staunton, 23.8 road miles south of Hereford.

We check stacks and ridges first, then bring back photographs of each fault and a written total.

Get a free quoteCall 01432 610152

Listings, stacks and the Wye Valley edge

  • Older cottages with weathered clay tile roofs and brick chimneys behind a flint wall
    The listed coreThe church, granary and almshouse are listed, each with its own consent route.
  • Slate roofs and chimney stacks along a red brick Victorian terrace
    Stacks on shared wallsA shared wall under the stack brings a party wall notice.
  • Newer homes with grey concrete tile roofs along a curving estate road
    Roof windows near the National LandscapePart of the land around Staunton is designated, which matters for dormers.

Our map of Staunton

Staunton, near Coleford on a street map, with a dashed circle around the town and the nearest towns we cover. Tiles © Esri; map data © Esri, HERE, Garmin, OpenStreetMap contributors.

Staunton, listings to skylights

Three checks on a Staunton roof: the listings, the stacks and the windows

We begin with the listed buildings, where the consent route decides the method, move up to the chimney stacks and their lead, and end at roof windows and the landscape designation.

A drawn cut-away section through a Herefordshire border house: the front of the main roof is cut open to show the rafters, underlay, battens and slates, beside a black-and-white timber-framed gable. Numbered, from the ridge down: 1 Listed roofs; 2 Stacks and lead; 3 Windows and landscape.

Fig. 1 Staunton's listed wall head, stack and roof window, numbered on one section.

Callout 1 of 3

Listed roofs: All Saints, the granary and the almshouse

Staunton's older buildings set the tone for this survey. Historic England's list records the Church of All Saints as Grade I (list entry 1186351, first listed 12 December 1953), The Steps and Attached Granary as Grade II (list entry 1186353, first listed on that date) and The Almshouse as Grade II (list entry 1289080, first listed 24 September 1984). Church Farmhouse is Grade II as well. The Victoria County History's account of the parish, published in 1996, describes Staunton Farm, a small late 17th-century farmhouse, as "rubble built and gabled", meaning walls of rough unsquared stone under a roof that ends in gables.

A gable is where a roof meets stonework, so the wall head and the verge are the places we examine first. We look at the stone under the verge for loose bedding, at the pointing beside it for open joints, and from the loft side we look for damp staining on the gable wall, which marks where weather has been getting in.

All Saints is Anglican. With worship continuing there, it stands outside listed building consent and its roofs fall under the diocese's faculty system. Our part is to photograph the roof clearly and describe each fault in plain terms.

The granary, the almshouse and the farmhouse follow a different route. Under section 7 of the 1990 Act, a listed building cannot be altered in a way that touches its character without consent, and a change of covering, a repointed verge or a rebuilt stack can touch it. Forest of Dean District Council is the authority that decides. We photograph the existing covering, ridge and verges first, so the request shows exactly what is there and the repair can match it. Our listed and heritage roofing page sets out the method.

The Staunton (S) Conservation Area, which Forest of Dean District Council designated, sits near the middle of the village. A conservation area weighs on dormers and raises its own questions, so ask Forest of Dean District Council whether an Article 4 direction applies to your address. For a larger job, building control is run by Forest of Dean District Council itself, on 01594 812315, or a registered building control approver can act instead.

Listing and permitted development

Does a listed house lose its permitted development rights?

No: those rights stay with a listed house, but listed building consent is needed in addition for any work that affects its character. The council decides, so we agree the method with it before the covering is touched, and our survey photographs go with the request.

Fig. 2 Wall abutments, drawn close

Callout 2 of 3

Staunton chimney stacks, their lead and the shared wall

Nobody can judge a chimney stack from the road, so we climb to it and work through its four faces one at a time, tapping the joints for a hollow note, looking for hairline cracks across the masonry and checking that the top is crowned so that rain runs away from the flue. The pots and cowls come next: each should sit firmly in its bed and carry no weed. The report carries pictures of all four faces and the crown, which shows you what the street view cannot.

Lead is the other half of a stack. At the point where the stack comes through the slope, sheet lead is wedged into the mortar joints and turned down over the covering, and the thickness matters. Royston Lead numbers its sheet by code: Code 3 is the thinnest size listed and is marked for soakers only, a soaker being a folded lead piece set under every course of tiles or slates, while Codes 4, 5 and 6 are the sizes listed for flashings. Lead flashing fitted correctly, MyJobQuote notes, can last for over 80 years, which is a hedge and never a promise. A flashing split along a fold is replaced, because sealant smeared over a split only hides it. Inside the loft, the timbers beside the stack get a look too: a stained rafter marks the place where water has been getting in.

Taking out a breast changes the structure. The Planning Portal is plain that a chimney breast cannot come out without Building Regulations approval. Section 2(2)(g) of the Party Wall etc. Act 1996 allows the building owner to take out a chimney breast that projects from a party wall, and under section 3(2)(a) at least two months' notice is needed. If next door does not answer within 14 days, the law treats that as dissent and surveyors are appointed under sections 5 and 10. Afterwards the slope is closed over with new battens and a covering that matches its surroundings.

Our chimney repairs page covers repointing, crowns and rebuilds. On a listed farmhouse or the almshouse, rebuilding a stack raises the consent question before the building one.

What we do at a Staunton stack

Pointing
Hollow joints raked back and refilled
Crown
Cracked mortar cut out and recast to shed water
Flashings
Lead lifted and checked for splits at each fold
Soakers
One under every course, replaced if thin or torn
Pots and cowls
Seated firmly, fixed and clear

You cannot see a stack's top from the street, so we send pictures of it.

Fig. 3 Chimneys, drawn close

Callout 3 of 3

Windows in the roof and a designated landscape

Part of the countryside around Staunton lies inside the Wye Valley National Landscape, which keeps the legal standing of an AONB under its newer name. It is a designation and it does not decide planning applications: Forest of Dean District Council does. Whether a particular house stands inside the boundary is a map check, and we suggest making it before you plan a window.

Under English rules, a National Landscape and a conservation area both shape planning for a roof. A Staunton dormer inside that land goes to Forest of Dean District Council first, and the guide sets out the conditions on a flush roof window. Our planning guide for roof windows lays out the conditions that do apply. On a listed house a new window in the roof is a listed-building matter before it is a planning one, and the Staunton (S) Conservation Area adds its own questions for the council.

The energy rules follow the window whichever planning route it takes. AD L 2021 Table 4.2 gives roof windows a value of 1.4 or WER Band B, and rooflights 2.2; from 24 March 2027 the same values appear as Table 3.2 in AD L 2026. The frame of a roof window goes into the slope with a flashing kit made for it, and the flashing is dressed to the covering around it so that water is shed on every side. Opening the roof for the frame means trimming the rafters, the timbers that carry the covering, so the framing is checked as well as the glass.

A roof window changes the loft as well as the roof. The lining round the opening, the insulation beside the frame and the plasterboard returns inside are all part of the job, and we ask what is on the other side of the slope before we cut. A loft used for storage takes a different finish from one used as a bedroom, and a loft that is to become a room brings further Building Regulations into play.

Our skylights page covers roof windows, replacement and flashing kits. When a quote includes a window, check that it names the frame, the flashing kit and the glazing value being fitted, and that it says what happens to the lining inside the room.

Terms on a window job

National Landscape
The current name for an Area of Outstanding Natural Beauty
Article 2(3) land
Protected English land, conservation areas among it
Roof window
A window set in the slope, in line with the covering
Rooflight
A glazed unit in a roof, held to the 2.2 figure
Flashing kit
Metal pieces that seal a roof window frame into the covering

Staunton roofs: listings, stacks and the National Landscape

What does a Staunton listing change when a roof needs a new covering?

On a listed house or outbuilding, a new covering can affect the building's character, so consent from Forest of Dean District Council comes before the work, with permitted development rights still standing beside the consent. Our photographs record the existing covering, ridge and verges, so the request shows what is there and the repair can follow it. A church in use takes a separate route, through the faculty system.

Do repairs to the roof of All Saints, Staunton, go through the council?

All Saints is an Anglican parish church; with services still held in it, repairs go through the diocese's faculty system, not through listed building consent from the council. The church is Grade I (list entry 1186351). If a church has closed for worship, or a meeting house belongs to the Quakers or the Unitarians, the exemption does not reach it and listed building consent is needed.

Is Staunton inside the Wye Valley National Landscape?

Part of the land round Staunton falls inside it. The designation is a label for the landscape. A dormer question belongs with Forest of Dean District Council, which is the planning authority here. A flush roof window is not caught by that bar. Check your own boundary on the council's map, because part of the land is in and part is out.

What should I ask about the Staunton (S) Conservation Area?

Ask Forest of Dean District Council two things: if your address sits inside the area, and if an Article 4 direction applies to it. A conservation area matters for a dormer, and a change of covering that alters how a street-facing roof looks is worth raising before work starts. The council holds the boundary map and can answer both from its own records.

When a Staunton chimney breast comes out, which approvals apply?

The Planning Portal says a chimney breast cannot be removed without Building Regulations approval. A breast that juts out of a wall the house shares calls for the building owner's notice, which has to reach next door at least two months before any masonry is cut. We photograph the loft side of the wall before and after, so there is a record of the opening and how it was closed over.

Does re-roofing a Staunton house mean adding insulation?

It can. Under AD L 2021 Table 4.3, a renovated roof has a threshold of 0.35 and an improved figure of 0.16, and paragraph 4.13 allows a relaxation where a 15-year simple payback is not reached, though generally not worse than 0.7. AD L 2026 replaces these tables from 24 March 2027. Building control or a registered approver confirms what applies to your job.

Book a stack-first survey in Staunton

Tell us which building the roof belongs to and what looks wrong, and we can survey it and set out one price.

10-year workmanship guarantee, in writing