Callout 1 of 3
The ridge on Leominster's tile and slate roofs
Our survey opens at the very top. On a Leominster house that top line is the ridge: a row of capping tiles along the top, bedded on mortar or held by a dry-fix system of clips and screws in place of mortar. When the Royal Commission surveyed the parish for its 1934 inventory of Herefordshire, it described the monuments it listed there, unless it said otherwise, as buildings that "are of the 17th century and of two storeys, timber-framed, and with tile or slate-covered roofs". Of the Forbury Chapel it wrote that "the walls are of stone and the roofs are slate-covered". So a ridge in this town may sit over clay tiles, natural slate or a covering put on after that survey, and each one is capped and fixed in its own way.
We walk the ridge line first, from one gable to the other. A capping tile that rocks under a hand has lost its bed. Open joints in the mortar let rain run down into the top course and onto the battens, the timber strips the tiles hang from. Where a ridge meets a hip, the sloping outside corner of a roof, we check the mortar again, because two lines of weather meet at that point.
Marley, the tile maker, sets out the current position plainly: "Installing to BS 5534 isn't required by law", yet after the 2015 amendments "mortar could no longer be relied upon as the only means of securing the roof covering". BS 5534:2014+A2:2018 is the code of practice for slating and tiling, and BS 8612 covers dry-fix ridge and verge systems. Mortar is still used. When we rebed a ridge we fix each capping tile mechanically as well, and on an older house we keep the bedded look where that suits the building.
A loose ridge on its own is a repair, not a new roof. If the survey shows the whole covering is worn out, the Planning Portal says that in England no application is normally needed when "Less than 25 per cent of the total 'building envelope'" is affected and "Less than 50 per cent of the roof is affected". A heavier covering is another matter: approval is needed if it "increases the weight of the roof covering by 15 per cent or more", and that means a structural check first. Our roof repairs page sets out the smaller jobs, and we photograph each fault on your ridge so you can see it before you decide.
Checked along a Leominster ridge
- Capping tiles that rock or have lifted
- Open or crumbling mortar joints
- A mechanical fixing on each capping tile
- The joint where the ridge meets each hip
- The end tile at each gable
A ridge that has lost its bed is a repair, and we price it as one.















