01432 610152 Get a quote Call 01432 610152

Roofers in Kington

Stone, slate and chimney repairs in Kington, a town north-west of Hereford.

A survey that begins at the ridge, photographs of each fault and one total set out in writing.

Get a free quoteCall 01432 610152

Flagstones, slate and a Grade I church

  • Older cottages with weathered clay tile roofs and brick chimneys behind a flint wall
    Flagstone on older cottagesThe county's stone atlas links Kington's older cottages with Raglan Mudstone flagstones.
  • Slate roofs and chimney stacks along a red brick Victorian terrace
    Slate or stone in 1934The inventory recorded monuments 4 to 41 as roofed in slate or stone.
  • Newer homes with grey concrete tile roofs along a curving estate road
    Listed Bridge Street, listed churchSeveral Bridge Street buildings are Grade II, and St Mary's church is Grade I.

Kington on the area map

Kington on a street map, with a dashed circle around the town and the nearest towns we cover. Tiles © Esri; map data © Esri, HERE, Garmin, OpenStreetMap contributors.

Kington roofs, flagstone to gutter

Kington in three callouts: flagstone and slate, chimney stacks and Bridge Street gutters

A Kington survey runs down through three callouts: the stone and slate on the slopes, then the stacks that rise through them, then the eaves and gutters of a town where houses face the street and the listed ones need consent.

A drawn cut-away section through a Herefordshire border house: the front of the main roof is cut open to show the rafters, underlay, battens and slates, beside a black-and-white timber-framed gable. Numbered, from the ridge down: 1 Flagstone and slate; 2 Stacks; 3 Eaves and gutters.

Fig. 1 Border house in section, with the Kington callouts numbered from the slope.

Callout 1 of 3

Flagstone and slate slopes on Kington roofs

The first callout is the slope. Herefordshire's building stone atlas says that in Kington older cottages are "roofed with flagstones from the younger Raglan Mudstone Formation". The 1934 Royal Commission inventory describes monuments 4 to 41 in Kington parish with the words "the roofs are slate or stone-covered." A flagstone is a thicker cut of stone than a slate, though its courses are laid in the same overlapping way, and the timbers under a Kington stone slope have to be sound enough to carry whatever covering sits on them.

When we survey a flagstone or slate slope, we look at the laps first. Colour is part of the match, so a sample is taken to the yard or the quarry before any order is placed. We look for slabs that have flaked, for pegs that have failed and for the course below a break, where a displaced stone has let water travel. Each fault is photographed from a ladder or tower, because a roof of this kind should not be walked on if it can be reached another way. A mortar fillet run along a stone slope to stop a leak can hide the real fault, so it is cut away until the course beneath can be read. The repair is then made properly, with the stone back in its lap and the fixing sound.

Weight matters when a covering changes. AD A calls a loading increase of more than 15% significant, and the Planning Portal's figure is 15 per cent or more, so any change between flagstone and slate is weighed against the covering it replaces, and a heavier result brings in Building Regulations and a structural check. SPAB adds that a supplier's claim of unavailability should be tested at the quarry itself, and that check is made before a different material is even discussed.

HomeBuilding gives the life of Welsh slate as 100+ years, and SPAB calls a well-slated roof "likely to be more than 100 years". The flagstone itself is judged by looking: how it has weathered, whether it has started to flake and how well the pegs are holding. Our slate roofing page sets out how slopes are stripped, sorted and relaid.

Matching flagstone

Can a Kington flagstone roof be patched with slate?

A patch of slate on a flagstone slope changes the look of the roof and the way its courses lap. Sound flagstones are reused first, and new stone is sourced for the gaps. Because the surface is mixed, the repair is photographed course by course so you can see what went where.

Flagstone is judged by looking at it, and every course we judge is photographed for you.

Fig. 2 The slopes, drawn close

Callout 2 of 3

Stacks, flashings and the lead at their feet

Callout two is the chimney. The stack carries a household's flues up through the slope, and the joint at its foot is one place a leak can start. We photograph the flashing, the lead strip let into the stack's mortar joints and dressed over the covering; the soakers, the small folded leads slipped under each course alongside it; and the back gutter, the lead trough behind the stack that turns water to either side. The top of a stack is photographed on every face, including the flaunching round the pots, because the street gives no view of any of it. Pots that lean are noted, and a stack that has begun to open at the joints is described in the report with a picture of each crack, so that the extent of each crack is visible before a repair is priced.

MyJobQuote says properly installed lead flashing "can last for over 80 years", and Royston Lead's table marks Code 3 as "Recommended for lead soakers only". The code for the sheet is picked to suit the job. A stack that has been repointed with hard cement can trap damp in softer stone or brick, so the mortar is chosen to suit the masonry and the joints are raked to a depth that holds the new mix.

Stack work in a town raises practical points too. A scaffold that stands on the footway needs a licence from Herefordshire Council, and a stack that shares a wall with next door can involve a party wall notice before anything is cut. Removing a stack and breast is not a repair at all, and for that the Planning Portal says Building Regulations approval will always apply. Our chimney repairs page covers repointing, rebuilding and capping.

A stack on a listed building is a listed element, so the pots, the brick and the flashing are all handled with the council's consent in mind. Kington has listed houses on Bridge Street. 5a and 6a Bridge Street is Grade II (list entry 1196546, first listed on 31 December 1993), and 11, 12 and 13 Bridge Street is Grade II (list entry 1196553, first listed on 8 October 1953). 10 Bridge Street is Grade II as well (list entry 1297578).

Checked on a Kington chimney stack

  • Flashing, soakers and back gutter in lead
  • Pointing on every face of the stack
  • Flaunching and the pots it holds
  • Cracks, leaning or open joints in the masonry
  • Whether the stack shares a wall with next door
Fig. 3 Chimneys, drawn close

Callout 3 of 3

Eaves, gutters and a street full of listed fronts

The last callout is the eaves, and in a town it matters for a second reason: a gutter here discharges close to the footway and the neighbour's wall. Brett Martin, the guttering maker, advises "1mm for every 600mm" of fall. Brackets, joints and outlets all get a look, and so does the fascia behind the gutter for the soft, dark timber that a leaking joint leaves behind. Our guttering, soffits and fascias page covers renewing a run.

Kington's Grade I church of St Mary (list entry 1208031, first listed on 8 October 1953) is a different matter from a house. St Mary the Virgin is Kington's Church of England parish church, with a service there every Sunday morning, so its roof is a faculty matter under the ecclesiastical exemption, outside the council's consent regime. For a listed house, section 7 of the 1990 Planning (Listed Buildings and Conservation Areas) Act requires listed building consent for works that affect its special character. Permitted development rights stay, and consent is needed on top.

Herefordshire Council designated the Kington conservation area in 1969; the county has 64 in all. A boundary does not stop repair, but a dormer there is for Herefordshire Council to see first, so read our planning guide for roof windows first. Whether an Article 4 direction applies in Kington is a question for Herefordshire Council.

Herefordshire Council Building Control (Plough Lane, Hereford) can be called on 01432 261938 or emailed at bce@herefordshire.gov.uk. A registered building control approver can take the same work. Structure, a heavier covering and insulation belong with one or the other.

On a listed front the gutter may be part of the building's character, so a cast or metal run is matched to the original profile and material where that can be done, and a plastic substitute is raised with the council before it is ordered. Downpipes that discharge onto the footway are redirected to a drain where they can be, since a spout over a pavement soaks the passers-by and stains the wall below it.

Price drivers on a Kington gutter job

Length of run
How many metres of gutter come down and go back
Height and access
Eaves height and where the scaffold can stand
Material
Plastic, metal or cast, to suit the building
Boards behind
Whether the fascia needs repair before refixing

One written total price, never itemised.

Kington roofs: stone, stacks and flat roofs

What are Kington's older cottages roofed with, and can it be matched?

The county's stone atlas links Kington's older cottages to flagstone cut from the Raglan Mudstone Formation, and the 1934 inventory records slate or stone roofs in the parish. The first step is to read the stone on the roof: sound pieces are reused and new stone is sourced for gaps, with colour checked first. SPAB advises asking the quarries direct whenever a supplier says stone is unavailable.

Does the Kington conservation area, designated in 1969, affect roof work?

Herefordshire Council's list gives 1969 as the year the Kington conservation area was designated. A like-for-like repair raises different questions from a new window or dormer, and the guide explains how far a conservation area reaches each. Ask Herefordshire Council whether an Article 4 direction applies, and have the council confirm if your address lies within the boundary before you plan a change.

Do repairs to a listed house on Bridge Street in Kington need consent?

Listed building consent is required before anything that alters a listed house's special character, and Herefordshire Council decides. Several Bridge Street buildings are listed Grade II, including 5a and 6a, 10, and 11 to 13. A listed house keeps its permitted development rights, but consent is also required, so the council hears from us before work begins and the materials and method are set down in writing.

Who signs off roof work at Kington's St Mary's?

The church is listed Grade I, but the listing does not decide the route on its own. Its congregation worships there each Sunday at 10 a.m. as a parish of the Diocese of Hereford, so roof work follows the faculty jurisdiction. If the building were redundant, listed building consent from Herefordshire Council would be the route. Nothing is ordered and no scaffold is booked until that is settled on paper.

What does replacing the felt on a Kington flat roof involve?

BS 6229:2025 covers flat-roof membranes, and NFRC's summary of it is a minimum 1:80 finished fall for general roof areas. HomeBuilding gives felt as 10-15 years and Less as 10 to 20, so both are quoted. In England, AD L treats putting fresh waterproofing on a flat roof as renovation work, which brings the insulation into the same check, so building control is asked.

Can scaffold stand on the footway of a Kington street?

Only with a licence. Herefordshire Council charges £167 for a maximum of one month, £123 for each extra month, and the council wants at least 10 days' notice. We arrange the licence with our scaffolder, and the quote you get already has scaffold in it. Highways Licensing at Herefordshire Council takes calls on 01432 261800. For a Kington house on a main road, the council's team can tell you who licenses it.

Arrange a roof survey in Kington

Send the address and a line on what you can see, and we will set a date and return with pictures.

10-year workmanship guarantee, in writing