01432 610152 Get a quote Call 01432 610152

Roofers in Christchurch

Valleys, gutters and roof slopes in Christchurch, with a listed church and vicarage in the village.

Our roofers come from Hereford, 26.1 road miles to the north, to survey, photograph and put one total in writing.

Get a free quoteCall 01432 610152

Valleys, gutters and the Old Vicarage in Christchurch

  • Older cottages with weathered clay tile roofs and brick chimneys behind a flint wall
    Valleys under strainA valley carries water from two slopes, so we check its lining first.
  • Slate roofs and chimney stacks along a red brick Victorian terrace
    Gutter lines and fallsSagging runs and weeping joints are marked along the eaves.
  • Newer homes with grey concrete tile roofs along a curving estate road
    A Grade II church and vicarageThe church and the Old Vicarage are both on the National Heritage List.

Where Christchurch sits

Christchurch on a street map, with a dashed circle around the town and the nearest towns we cover. Tiles © Esri; map data © Esri, HERE, Garmin, OpenStreetMap contributors.

Christchurch roofs, valley to vicarage wall

From the valley gutter to the vicarage wall: a Christchurch roof read in three

Our survey follows the water: first the valley where two slopes meet, then the gutter and eaves that receive it, and last the listed church and vicarage whose rules reach the neighbouring roofs.

A drawn cut-away section through a Herefordshire border house: the front of the main roof is cut open to show the rafters, underlay, battens and slates, beside a black-and-white timber-framed gable. Numbered, from the ridge down: 1 Valley; 2 Eaves and gutter; 3 Church and vicarage.

Fig. 1 A Christchurch roof drawn in section, with valley, gutter and wall numbered one to three.

Callout 1 of 3

Where two slopes meet: valleys at Christchurch

Every drop of rain that lands on two neighbouring slopes ends up in the valley between them, so callout one is the valley. It is a gutter built into the roof itself. A valley can be lined with lead, formed from tiles cut and laid to a curve, or fitted with a GRP channel, and whichever it is, the survey names the type before anything else. From the garden a valley looks like a faint line. Close up it shows whether the lining has cracked, whether the tile edges on either side have broken and whether the channel is clear.

Lead is sold in codes, each tied to a use. Royston Lead lists Code 3 as recommended for lead soakers only, so a valley lining asks for a heavier code than a soaker does, and the choice goes into the quote. We look for lead that has crept down the slope, split along a fold or lifted at its edge. A patch can answer a split in one place. A valley cracked along its length wants a new lining, and the old tiles beside it are lifted and relaid on top of it.

We also check both ends of a valley: the top, where it meets the ridge, and the foot, where it discharges into the gutter. A lining can be sound along its length and still fail at either end. Leaves, moss and silt in the channel can back water up under the tile edges, which is why we clear a valley and photograph it before judging the lining. A blocked channel and a failed one look much alike from below, and only one of them needs new lead. Where a valley ends in a gutter, the join gets the same attention, because that is where two systems hand over to each other.

None of this changes the approval picture for England. The Planning Portal says a re-cover is normally outside the application route where it touches less than 25 per cent of the building envelope and less than 50 per cent of the roof, and a new covering weighing 15 per cent or more extra would bring Building Regulations approval into play. Our lead roofing page covers valleys, flashings and sheet work in more depth.

Valley question

How can you tell a cracked valley lining from a blocked one?

We climb up and look. A clear channel with water still escaping under its edge means the lining has failed. A channel full of silt and moss, with sound lead beneath, only needs clearing. Photographs of both conditions go into the report, so you see which one you have.

A blocked valley and a failed one look alike from below. Only one needs new lead.

Fig. 2 The valley, drawn close

Callout 2 of 3

Eaves, gutters and the falls that carry water away

The valley empties into the eaves, the lower edge of the roof, and callout two follows the water there. Three parts share the job. The gutter catches the run-off. Behind it, the fascia is a long board nailed over the ends of the rafters, and the gutter hangs from it. Under the overhang, the soffit is the panel that shuts off the space above the wall. If the fascia has softened, the gutter loses its support and begins to sag. A sagging run holds a pool of water instead of passing it on.

Brett Martin sets out a fall of 1mm for every 600mm in its guidance on installing rainwater systems. That is a very slight slope, which is why a run can look level and still hold water at the far end. We check falls with a level along each run, then look at the joints, the brackets and the outlets. Weeping joints are marked on a photograph, and a downpipe that discharges beside a wall instead of into a drain is noted in the report as well.

Repair or replace? A single cracked length, a split joint or a loose bracket is a repair. Fascia that has rotted along most of a run, or gutters that have lost their fall because the boards behind them have moved, point to a replacement. Eaves details also decide whether tiles at the edge of the roof are supported properly, so the last course is checked while the gutter is open. Where the gutters are new and the roofline is sound, our guttering, soffits and fascias page sets out the options.

Eaves can also shelter birds and bats, and the law covers both. In section 1 of the Wildlife and Countryside Act 1981 the offence turns on one word, intentionally, applied to anyone who takes, damages or destroys a nest that birds are using or building. Bats and the places where they breed or rest are protected as well, and England's licences come from Natural England. If a survey turns up either, the job is paused and the next step discussed with you before anything is disturbed.

Read along a Christchurch eaves line

  • Fall of each gutter run towards its outlet
  • Joints and brackets that weep or have slipped
  • Fascia boards that have softened
  • Soffit boards that have lifted or split
  • Where each downpipe discharges

A gutter that looks level can still hold a pool of water at one end.

Fig. 3 Gutters and downpipes, drawn close

Callout 3 of 3

Old Vicarage, church and the landscape around them

Callout three looks past the house to its neighbours. Christchurch has two listings on the National Heritage List: the Church of Christchurch, Grade II (list entry 1214000, first listed 24 September 1984), and the Old Vicarage, also Grade II (list entry 1213999, first listed 24 September 1984). Under section 7 of the Planning (Listed Buildings and Conservation Areas) Act 1990, a listed house needs consent before work that alters its character, and permitted development carries on beside it. The church is on a separate track, set by its denomination and by whether services continue, so its governing body is asked first. The approach we take is the same either way: look, photograph, and describe the roof as it stands before proposing a change.

The Wye Valley National Landscape, which used to be called an Area of Outstanding Natural Beauty, takes in part of the land around Christchurch. It does not make planning decisions. Those stay with Forest of Dean District Council. What the designation does on the English side is change the dormer picture. A new Christchurch dormer is therefore raised with Forest of Dean District Council, while re-covering an existing roof goes ahead in the usual way. Our planning guide for roof windows covers what a new window in the slope must meet.

Staunton (S) Conservation Area and Coleford Conservation Area lie in the surrounding district, and the district council keeps their maps. A house near the edge of either should be set against the boundary before its roof changes appearance. Check, too, whether an Article 4 direction applies to your address with Forest of Dean District Council, as a direction can withdraw permitted development across a defined area.

Roof work on a listed or protected house starts with photographs of what exists, so every decision about the covering rests on a record. Our listed and heritage roofing page describes the sequence. Building control for Christchurch can be Forest of Dean District Council Building Control, on 01594 812315, or a registered building control approver. A scaffold on a lane has to be licensed, and we arrange the licence with our scaffolder; its cost sits in the written total.

The foot of a gutter against an old wall

SoundGutter dry at the joint, wall face clean beneath
Needs workJoint weeping, green staining running down the wall

Christchurch roofs: valleys, gutters and listed neighbours

How does a Christchurch valley fail, and what does a repair involve?

Lead in a valley can crack along a fold, creep down the slope or lift at its edge, and a channel choked with moss can push water under the tiles. We clear the channel first, photograph the lining and then say whether a patch will do. A valley split along its length needs a new lining, with the tiles either side lifted and relaid over it. The price covers the relaying as well.

Does the Wye Valley National Landscape stop a dormer at Christchurch?

It does not stop one, but it changes the route. The designation is not the planning authority, and Forest of Dean District Council decides. Speak to the council before any dormer is drawn, since that is the work the designation touches, and keep its reply with your survey photographs. Our planning guide explains the separate rules for roof windows, and we can talk a design through at the survey.

Which buildings in Christchurch are on the National Heritage List?

The Church of Christchurch is Grade II (list entry 1214000, first listed 24 September 1984) and the Old Vicarage is Grade II (list entry 1213999, first listed 24 September 1984). Roof work on the vicarage needs listed building consent (Forest of Dean District Council decides it), while the church follows a route set by its denomination and by how it is used, so its own governing body should be asked before a scaffold goes up.

What fall should a gutter on a Christchurch house have?

Brett Martin, a gutter manufacturer, advises 1mm for every 600mm towards the outlet. That is gentle enough to look level by eye, so we measure it with a level on each run. If a run has lost its fall because the fascia behind it has moved, adjusting the brackets may not be enough and the board itself has to be dealt with. The survey records the fall at both ends of each run so the comparison is clear.

Where are the nearest protected areas to a Christchurch house?

The Staunton (S) Conservation Area and the Coleford Conservation Area are the nearest, and Forest of Dean District Council holds their maps. Part of the land round the village also lies in the Wye Valley National Landscape. Ask the district council whether an Article 4 direction applies at your address, since a direction can take away permitted development rights in a defined area.

Can a Christchurch roof be re-covered without a planning application?

In England a like-for-like re-cover is normally permitted development. The Planning Portal adds a Building Regulations test: a re-cover normally falls outside the application route where less than 25 per cent of the building envelope and less than 50 per cent of the roof is touched. A heavier covering or an insulation upgrade changes that picture, so we raise both on the day of the survey, ahead of the written figure.

Ask for a Christchurch survey, valley first

Send a photograph of the roof and a line about any stain, and we will follow the water from the valley down.

10-year workmanship guarantee, in writing