01432 610152 Get a quote Call 01432 610152

Roofers in Mitcheldean

Verge, stack and listed-wall roof work in Mitcheldean, from Millend Street to the Grade I church.

Photographs of whatever turns up on your roof come with a single written price, sent after the survey.

Get a free quoteCall 01432 610152

Mitcheldean's old rows and its Grade I church

  • Older cottages with weathered clay tile roofs and brick chimneys behind a flint wall
    Sixteenth-century timber rowsOld frames lean, and the verge beside a frame is where gaps open.
  • Slate roofs and chimney stacks along a red brick Victorian terrace
    Stacks that rely on leadA chimney passing through the slope depends on flashings that stay sound.
  • Newer homes with grey concrete tile roofs along a curving estate road
    Listed neighbours on Millend StreetListed buildings bring consent questions before any tile or slate is chosen.

A map view of Mitcheldean

Mitcheldean on a street map, with a dashed circle around the town and the nearest towns we cover. Tiles © Esri; map data © Esri, HERE, Garmin, OpenStreetMap contributors.

Millend Street to the church wall

Mitcheldean roofs read at the verge, the chimney stack and the listed wall

Our Mitcheldean survey follows three stops down the drawing. The gable verge comes first, where old timber frames meet the edge of the covering, next the chimney stack and the lead dressed around its base, and last the listed buildings and the Grade I church.

A drawn cut-away section through a Herefordshire border house: the front of the main roof is cut open to show the rafters, underlay, battens and slates, beside a black-and-white timber-framed gable. Numbered, from the ridge down: 1 Gable verge; 2 Stack and lead; 3 Listed walls.

Fig. 1 Mitcheldean section: gable verge, chimney stack and listed wall, marked 1 to 3.

Callout 1 of 3

Verges on Mitcheldean's timber-framed rows

We begin at the verge, the stretch of covering that finishes along a gable end. The Victoria County History's 1996 account of the town says: "Among the few early buildings to escape later redevelopment is a row of three timber-framed houses", and it puts them in the 16th century on the south side of Millend Street. A row like that has end houses with an open gable verge and middle houses that share their side walls, so the repair depends on where a house stands in the line.

A traditional verge has tiles or slates that overhang the gable wall slightly, resting on a base course called the undercloak and bedded in mortar. Over time the mortar cracks and drops out, and the first sign is a gap you can see from the pavement. Dry-fix verge units are the newer answer, and BS 8612 covers them. Slating and tiling work is governed by BS 5534:2014+A2:2018, the standard currently in force. We pick the method by looking at the house, because a mortar verge can suit an old frame better than a plastic unit.

Beside a timber frame the verge has an extra job to do. The gable timbers move, and a verge fixed rigidly to them can split along the join. We test that join with a hand and a torch. Overhead, in the loft space, the torch is turned on the gable's underside as well, hunting for the staining that marks a leak, and on the battens nearest the verge for any that have darkened. A hairline gap is filled with mortar worked in properly, never smeared across the surface, because a smear can lift and leave the gap behind it.

Cracked verge tiles come off singly, and the course is checked back along the slope for others that have slipped, since a loose tile can have a neighbour in the same state. A whole verge is rebuilt when its bed has failed along the length of the gable. We photograph each stage, from the first gap to the finished line, and the pictures reach you with the written price. Slope work that starts at a verge and runs further is described on our pitched roofing page.

A gable verge, part by part

Undercloak
The base course the overhanging tiles rest on
Verge bed
Mortar under the tiles, raked out where it has cracked
Dry-fix unit
A clipped and screwed alternative, covered by BS 8612
Gable timber
The frame edge, checked from the loft for staining
Fig. 2 The verge, drawn close

Callout 2 of 3

Mitcheldean chimney stacks, their lead and their neighbours

Seen from the street, the chimney is the one part of the house with weather on all four sides. The Victoria County History's 1996 account notes that "From the mid 16th century some buildings in the town were rebuilt", so we never judge a stack's age from the front of the house. Whatever a Mitcheldean stack is built of, we examine each face, every joint and the pots at the top. Nobody can judge the top from the pavement, so photographs of each face reach you with the report, along with the flaunching and the pots.

Where stack and slope meet, lead makes the joint watertight. The flashing is the strip pushed into the mortar and laid over the covering, and soakers are the small folded pieces that go beneath the tiles at the sides, while the back gutter is a trough of lead set behind the stack. Royston Lead's table lists Code 3 as "Recommended for lead soakers only", with Codes 4, 5 and 6 shown for flashings, which is why the code we order depends on the part. MyJobQuote says correctly fitted lead flashing "can last for over 80 years", so sound lead stays and split lead is replaced.

Flaunching is the mortar cap the pots are set in, sloped so it throws rain off the top. When it cracks, rain runs into the stack. We rake out weak pointing, refill it and rebuild the flaunching where it has gone. Taking a stack down altogether is a bigger decision, because the Planning Portal says that "Building regulations approval will always apply when removing chimney breasts as they are part of the building's structure."

Next door comes into it when the breast sits in a party wall with the house beside yours. Under the Party Wall etc. Act 1996 the owner of the building doing the work gives notice, and cutting away a projecting chimney breast needs that notice served on the adjoining owner at least two months before the masons start on the breast. A neighbour who stays silent for 14 days is treated as dissenting, and surveyors are then appointed. For questions on that, speak to a party wall surveyor, not building control. Our chimney repairs page sets out the rebuilding and repointing work in more detail.

Taking a stack down

Who tells the neighbours when a shared chimney breast comes out?

The owner doing the work serves the notice on the neighbour, giving them two months or more before it starts, and a plain word beforehand keeps things friendly, even though the notice itself is a formal one. Surveyors come in only if the neighbour objects or stays silent.

Fig. 3 Chimneys, drawn close

Callout 3 of 3

Millend Street, St Michael's and the conservation area

We finish at the wall, where Mitcheldean's protected buildings stand among its ordinary houses. At the 2021 Census the parish had 2,778 usual residents. St Michael's church carries the Grade I listing (list entry 1100286, first listed 23 September 1955), and its Sunday Eucharist marks it as a working Church of England church, within the Gloucester diocese. The Victoria County History records that in the later 15th century "the clerestory and a new roof were added" to the nave. Bachelor's Hall is Grade II (list entry 1299150, first listed 4 July 1985), as is The Shoe Shop (list entry 1348501, first listed 4 July 1985), and 2 Millend Street, adjoining Church Cottage, is Grade II (list entry 1100269). The Mitcheldean Conservation Area belongs to Forest of Dean District Council, which holds its boundary, and a roof at the edge of that line deserves a call before the work is planned.

Section 7 of the Planning (Listed Buildings and Conservation Areas) Act 1990 governs a listed house's roof, because works are controlled where they would affect "its character as a building of special architectural or historic interest". A listed house keeps its permitted development rights, and consent is needed besides. For that reason tile, fixings and technique are settled with the council in writing before any material is ordered.

Church buildings in use for worship are exempt from listed building consent only in these cases:

  • Church of England churches, which come under the faculty jurisdiction
  • Roman Catholic churches
  • Methodist churches
  • Baptist Union churches, if a Schedule 1 trust corporation holds them
  • United Reformed churches

Quakers and Unitarians have no exemption for their meeting places, and a closed chapel counts as out of use, so both go to the council. St Michael's belongs to the first group, so while services continue its roof is a faculty matter.

Ask Forest of Dean District Council to confirm whether an Article 4 direction applies to your street. A new dormer or roof window is a separate planning matter, which our planning guide for roof windows explains. For building control in Mitcheldean you can ring the district council's team on 01594 812315, or use a registered building control approver instead. Reaching the town means 19.3 road miles heading south-east out of central Hereford, around 35 minutes behind the wheel. If your house is protected, the way we work on it is on our listed and heritage roofing page.

Where a Mitcheldean roof quote gets its shape

Listed status
Consent route and the time it takes to agree materials
Access
Whether a scaffold is needed on the street side
Covering chosen
Matching tile or slate, or a new covering
Condition found
How much timber and lead need repair beneath

One written total price, never itemised.

Mitcheldean roofs: verges, stacks and listed walls

What keeps a gable verge sound beside a Mitcheldean timber frame?

A verge beside a frame has to tolerate the timber moving. We check the join between frame and covering, rake out cracked mortar and rebed the verge tiles, or fit a dry-fix unit covered by BS 8612 where it suits the house. Inside the loft we look for staining on the gable timbers. Photographs of the gap and the repair are in your report.

Do I need to tell the neighbours before a Mitcheldean chimney breast comes out?

Yes, where that breast sits in a shared wall. The Party Wall etc. Act 1996 gives you, the building owner, the job of serving notice, and it must land at least two months before that breast is cut away. A surveyor is appointed only on dissent, or after 14 days without a reply. Building Regulations approval also applies, the Planning Portal says, so building control hears about it too.

Which listed buildings in Mitcheldean might my roof work affect?

Bachelor's Hall, The Shoe Shop and 2 Millend Street are all Grade II, and the church is Grade I. Your own house may be listed too, so look up its entry before planning anything. If it is, section 7 of the 1990 Act asks for consent as well as any permitted development you hold, and the council is asked first.

Is roof work at Mitcheldean's church covered by listed building consent?

No, while worship continues. St Michael's church is Grade I, and because the Church of England holds a Eucharist there each Sunday, its roof follows the faculty system. A chapel that has closed, or a Quaker or Unitarian meeting place, would take consent from the council. We still talk to the church first, and only then put a price together.

Does the Mitcheldean Conservation Area limit a change of roof covering?

It can. Forest of Dean District Council designates the area and keeps the boundary, so check your street on its map. Putting back the same covering is one thing, and changing how the roof looks is another, so photographs of what is there now help the council decide. Ask the council too about any Article 4 direction before ordering a different tile.

What notice does a scaffold licence need on a Mitcheldean street?

Gloucestershire County Council runs the highway side in Mitcheldean and grants its scaffolding licence for a 28-day minimum, charges £36 per 7 days to extend it and wants 12 calendar days' notice at least, so a street job is booked well ahead of the start date. The licence rests on section 169 of the Highways Act 1980. We arrange the licence with our scaffolder, and your written price takes that scaffold on board. If your Mitcheldean house fronts a main road, say so early, so the licence fits.

Have a Mitcheldean verge or stack looked at

Describe the verge, the stack or the listed front you want checked and we will arrange a survey, then follow it with one written price.

10-year workmanship guarantee, in writing