Callout 1 of 3
Bungalow slopes in Cinderford, and the cottages they replaced
The Victoria County History of the Forest of Dean, published in 1996, records that after 1945 many small bungalows were built privately in Cinderford, "some in place of older stone cottages", and that private housing estates followed from the 1960s. At the 2021 Census the parish had 8,773 usual residents. For a roofer that history means a town of single-storey houses with low eaves and long, simple slopes, set among the older buildings that survived.
A bungalow roof is a large part of what you see from the road, so we survey it slope by slope. Low eaves let us reach the covering from a ladder, and we photograph each slope as a series of strips, working upward from the eaves, so no part is missed and every fault can be placed on a plan of the roof. Along the way we press the ridge and hip capping, look at the verges and sight down each slope for a dip that suggests a failing batten or rafter.
Bungalow gutters sit close to the ground and to the window heads, so a leaking joint stains the wall and the frame beneath it. We check the gutter on every side as part of the slope survey and note the outlets, the joints and the fall. A bungalow slope with a local fault is repaired and not re-covered, and the photographs show you which of the two the roof needs.
The Planning Portal's test for a re-cover has two limbs, and both must hold: less than 25 per cent of the building envelope affected, and less than 50 per cent of the roof. Re-covering a whole roof affects all of it, which is more than half, so a full re-roof of a bungalow goes beyond the case where no application is normally needed and building control is involved. A repair to part of one slope is a different matter.
A new covering can also change the load. The Planning Portal says Building Regulations approval is needed if the new covering puts the weight of the roof up by 15 per cent or more, and AD A speaks of a significant change when the loading goes up by more than 15%. A structural check comes first. Our roof replacement page explains how we choose a covering for the roof underneath it.
Slope by slope on a Cinderford bungalow
- A photograph of every slope, strip by strip
- Ridge and hip capping pressed for movement
- A dip in the line that suggests a failing batten
- Verge edges and the end tiles
- Gutters and fascias along the low eaves
On a bungalow the roof is most of what the street sees, so each slope is surveyed in strips.















