01432 610152 Get a quote Call 01432 610152

Roofers in Drybrook

Roof repairs, re-roofs and chimney work for homes across Drybrook, in the Forest of Dean.

We begin at the ridge, photograph every fault on your own roof, and put the repair into one written price.

Get a free quoteCall 01432 610152

Slopes, stacks and a listed church in Drybrook

  • Older cottages with weathered clay tile roofs and brick chimneys behind a flint wall
    Coverings near their endWorn tiles and slates are found, photographed and explained before any price.
  • Slate roofs and chimney stacks along a red brick Victorian terrace
    Chimney stacks and leadEvery face of the stack, its collar and its flashing is inspected.
  • Newer homes with grey concrete tile roofs along a curving estate road
    A listed church roofA Grade II listing and a church exemption change who must agree work.

Getting to Drybrook

Drybrook on a street map, with a dashed circle around the town and the nearest towns we cover. Tiles © Esri; map data © Esri, HERE, Garmin, OpenStreetMap contributors.

Drybrook roofs, ridge to church wall

From ridge to church wall: three callouts on a Drybrook roof

The survey begins on the ridge and slopes of a village house, climbs to the chimney stack and its lead, and ends at the listed church and the rules that surround it.

A drawn cut-away section through a Herefordshire border house: the front of the main roof is cut open to show the rafters, underlay, battens and slates, beside a black-and-white timber-framed gable. Numbered, from the ridge down: 1 Ridge and slope; 2 Stack and lead; 3 Church wall.

Fig. 1 Drybrook roof section with ridge, chimney and church wall numbered one to three.

Callout 1 of 3

Ridge, slopes and the life left in a covering

Callout one covers the ridge and the slopes below it. Drybrook parish had 3,207 usual residents at the 2021 Census, according to the ONS. That makes for varied roofs, and nothing lets us assume one covering for any of them, so each roof is read on the day. We note whether it is clay, concrete or slate, how the units are fixed and which have shifted. The ridge comes first. Its capping may be set in mortar or clipped and screwed down with a dry-fix kit, and the report records which of the two is on your roof.

Marley, the tile maker, states that "Installing to BS 5534 isn't required by law", and adds that mortar "could no longer be relied upon as the only means of securing the roof covering". BS 5534:2014+A2:2018 is the standard that covers slating and tiling, while BS 8612 is the one for dry-fix ridge and verge fittings. Mortar is not banned. When a ridge is rebedded we also screw or clip each capping tile and keep the mortar line tidy. Capping that rocks when pressed has lost its bedding, and a gap between mortar and tile gives rain a route into the top course.

Lifespans come as ranges. For concrete tiles Marley gives "around 60 years" and HomeBuilding "40-50 years". HomeBuilding says Welsh slate lasts "100+ years". Clay tiles are a separate case, and the BRE minimum of 60 years belongs to clay alone. None of that is a promise about your roof, so rather than guess from age we lift a few tiles and look at the nibs, the battens and the nails. A lone cracked tile can be swapped out, and the report records that when it is all the roof needs. Battens that have rotted mean stripping the slope and starting again.

Two approval questions follow any re-covering. England's Planning Portal gives a two-part test: less than 25 per cent of the building envelope and less than 50 per cent of the roof affected, and an application is then not normally needed. A heavier covering falls outside it, because approval is required when a new material raises the covering's weight by 15 per cent or more, and the structure is checked first, before any order. If the weight is in doubt, we set the two coverings' weights side by side in writing before any order. Our pitched roofing and roof replacement pages describe the work itself.

Ridge and slope at a Drybrook house

Ridge
Capping pressed for movement, mortar or dry-fix noted
Slopes
Cracked and slipped units marked on a photograph
Battens
Read through lifted tiles for rot or loose nails
Verges
The edge at each gable checked for lost mortar

A covering is read by lifting it, and the age of the house tells you far less than the battens do.

Fig. 2 The ridge, drawn close

Callout 2 of 3

Chimney stacks, their lead and the wall next door

Callout two rises above the slopes: the chimney. A stack stands with all four faces in the weather, and whatever runs off it lands on the covering below. We examine the pointing (the mortar between the courses), the flaunching (the sloped collar of mortar around the base of the pots) and the pots. From the street the top is out of sight, so pictures of every face, and of the collar, go with the report, in the order we walked the roof. Open joints are raked out and repointed. A stack that leans, or has lost courses near the top, may have to come down and be rebuilt.

The joint between stack and roof is kept dry by lead. The flashing here is a lead strip set in a groove cut in the brickwork, then laid out across the covering. Soakers, folded pieces of lead, slide under the courses along each side, and a back gutter in lead carries water round behind the stack. Royston Lead's table marks Code 3 "Recommended for lead soakers only" and lists Codes 4, 5 and 6 for flashings. MyJobQuote says lead flashing "can last for over 80 years" when correctly installed, so sound lead is left undisturbed. Split or lifted lead is renewed with new sheet, not smothered in sealant. Our chimney repairs page covers rebuilding and repointing.

Removing a chimney breast, the part standing inside the house, brings in other rules. The Planning Portal states: "Building regulations approval will always apply when removing chimney breasts as they are part of the building's structure." Where the breast shares a wall with next door, a party wall notice from you as building owner has to allow at least two months. Forest of Dean District Council Building Control, on 01594 812315, covers Building Regulations for a Drybrook address, and a registered building control approver is the alternative route.

A sketch of the stack goes with the quote, marking which faces need pointing and where the lead has lifted, so a mason or a plumber looking at it later would read the same roof you did.

Checked on a Drybrook stack

  • Pointing on all four faces
  • Flaunching cracks round the pots
  • Lead flashing lifted from its groove
  • Soakers at both sides of the stack
  • Lean or open courses near the top
Fig. 3 Chimneys, drawn close

Callout 3 of 3

The listed church and the conservation areas near Drybrook

Callout three is the church wall. The United Reformed Church in Drybrook is listed Grade II (list entry 1186469, first listed 4 July 1985). Churches follow their own consent routes. In England a United Reformed church in regular use for worship sits among the buildings exempt from listed building control, so roof work goes through the church's own system. If the building closed, that would change: the Forest of Dean District Council route for listed building consent would apply, while a Quaker or Unitarian meeting house, in use or not, needs that consent anyway. Ownership and current worship settle the route, so the first call is to the church's own governing body.

Houses are treated differently. Under section 7 of the Planning (Listed Buildings and Conservation Areas) Act 1990, works that would affect a listed building's character need consent, while the permitted development the house already had stays with it. We settle the covering, lead details and working method with the council ahead of any stripping. The survey of a listed house records the roof in photographs, so the application describes what is really there.

Two areas on Forest of Dean District Council's list, Mitcheldean Conservation Area and Ruardean Conservation Area, lie within reach of Drybrook, so check a house close to either boundary against the council's map. Ask the council whether an Article 4 direction applies to your address too, since such a direction can withdraw permitted development across a defined area. Planning for roof windows has its own page, our planning guide for roof windows.

Roof work on a Drybrook street can call for scaffold on the highway, and that takes a licence under section 169 of the Highways Act 1980. Gloucestershire County Council is the highway authority here. We arrange the licence with our scaffolder, and the written price already includes the scaffold. Notice periods belong to the council, and we plan the start date around them.

What sets the price of a Drybrook re-roof

Covering
Clay, concrete or slate, and how many slopes
Structure
Battens and rafters found sound or needing renewal
Detail
Chimneys, valleys and lead flashings on the roof
Access
Height, and any licence for scaffold on the road

One written total price, never itemised.

Drybrook roofs: chimneys, church and conservation areas

How can a Drybrook roof be read before anything is stripped?

The survey starts on the ridge and works down. We press the capping, look for cracked and slipped units, and raise a few tiles to check the battens and nibs beneath them. Each finding gets a photograph, listed in the order we walked the roof. The covering, its fixings and the timber below tell us whether a repair will hold, and that decides whether the report suggests a repair or a re-roof. Where a repair is the better buy, the report says so plainly and prices only the repair.

Who must agree roof work on Drybrook's listed United Reformed Church?

The church is Grade II (list entry 1186469, first listed 4 July 1985). Whilst a United Reformed church is used for worship it is exempt in England, so the denomination's own system governs the work. A closed building loses that exemption, and Forest of Dean District Council then handles its listed building consent. Unitarian and Quaker meeting houses have no exemption at all, even when they are in use.

Which conservation areas lie close to Drybrook?

Mitcheldean Conservation Area and Ruardean Conservation Area are the two near Drybrook. Forest of Dean District Council's list and maps show them, so hold your address against the boundary before you alter the roof's appearance. Ask the council, too, whether an Article 4 direction applies, because a direction can take away permitted development in a defined area. A short email to the council, quoting your street, is enough to get the answer.

When does insulation turn a Drybrook re-roof into a Part L job?

Stripping and re-covering a pitched roof is renovation work, so Approved Document L (2021 edition) Table 4.3 applies, with a threshold of 0.35 and an improved figure of 0.16 W/(m2K). Paragraph 4.13 allows a lower standard where the full upgrade cannot be done or cannot repay itself in 15 years. AD L 2026 takes over on 24 March 2027 as Table 3.3.

What happens about scaffold on a Drybrook road?

Section 169 of the Highways Act 1980 makes a licence a condition of any scaffold that obstructs the highway. Gloucestershire County Council grants its scaffolding licence for £145 over a 28-day minimum, adds £36 per 7 days after that and needs 12 calendar days' notice; we arrange the licence with our scaffolder, so scaffold is in the written price. National Highways, a separate body, runs trunk roads and motorways.

Is lead round a Drybrook chimney repaired or replaced?

It depends on what the survey shows. A flashing that has only lifted from its groove can be re-dressed and the joint made good. Lead that has split, or a back gutter that has failed, is replaced with new sheet of a suitable code. MyJobQuote says correctly fitted lead flashing can last for over 80 years, so sound lead is left alone and photographed for your records, with the flashing and the back gutter shown separately.

Have your Drybrook roof surveyed from ridge to eaves

A few photographs and a sentence about what worries you are enough for us to visit and write one price.

10-year workmanship guarantee, in writing