01432 610152 Get a quote Call 01432 610152

Roofers in Longhope

Roof repairs and re-roofs for Longhope's timber-framed cottages, listed houses and newer homes.

We start at the verge where covering meets frame, camera in hand, and the price comes as a single written total.

Get a free quoteCall 01432 610152

Timber frames and listed cottages in Longhope

  • Older cottages with weathered clay tile roofs and brick chimneys behind a flint wall
    A timber-framed rangeDam Barn Cottages show how a frame and its covering meet at the verge.
  • Slate roofs and chimney stacks along a red brick Victorian terrace
    Listed village cottagesEach is Grade II, so roof work is checked for consent first.
  • Newer homes with grey concrete tile roofs along a curving estate road
    Old lofts, new underlayA new underlay in an old roof changes how the loft must breathe.

A map of Longhope

Longhope on a street map, with a dashed circle around the town and the nearest towns we cover. Tiles © Esri; map data © Esri, HERE, Garmin, OpenStreetMap contributors.

Longhope roofs, frame to eaves

Timber frame, listed cottages and eaves air: three callouts at Longhope

The survey begins where a roof meets an old timber frame, takes in the listed cottages and the conservation area, and ends under the eaves, where a new underlay changes how the loft breathes.

A drawn cut-away section through a Herefordshire border house: the front of the main roof is cut open to show the rafters, underlay, battens and slates, beside a black-and-white timber-framed gable. Numbered, from the ridge down: 1 Timber frame; 2 Listed walls; 3 Eaves air.

Fig. 1 Longhope roof section with timber frame, listed wall and eaves marked 1, 2 and 3.

Callout 1 of 3

Dam Barn Cottages and a roof on timber

Callout one is the timber frame: the wooden skeleton of an old house, with the roof sitting on top. Longhope has a documented example. The Victoria County History (2010) records that Dam Barn Cottages in Church Road "occupy a long timber-framed range erected in the late 17th or early 18th century", built possibly for industry and used as a farm building by the mid 19th century. A long range carries a long roof, and a long roof has a great many places where covering meets timber. We walk it end to end, gable to gable, and note each junction on the photographs in turn.

At each gable the covering finishes in an edge called the verge. On a framed building the verge sits on timbers that shift a little with each season, and have done for generations. Gaps at the join between covering and frame, crumbled verge mortar and dark runs on the timber below are what we look for. From the loft we follow the wall plate, a long timber lying along the wall head that the rafters bear on, and then the rafter ends. Those are the places to read for damp, since damp can show in the timber before it marks a ceiling. Decayed timber is shown in photographs and talked through before a price is written, so the decision rests with you and the facts are laid out, and where a roof repair alone would only hide a wet frame, the report says so.

A verge is either set on a mortar bed or clipped with a dry-fix system. Marley, the tile maker, points out that fixing to BS 5534 "isn't required by law", although the 2015 amendments made it clear that mortar can no longer stand as the sole fixing for the covering. BS 8612 is the specification for dry-fix. On an old framed house we keep to the method that suits the building. Where mortar is right it goes back, with a mechanical fixing beside it, and the line is dressed so the gable still looks like the rest of the house.

Matching matters on a frame, and so does restraint. A repair in the same kind of tile or slate as the existing roof sits better beside old timber than a different one, and the survey records what is already there before a replacement is chosen. Our pitched roofing page sets out repairs, re-covering and the fixing methods behind them.

The verge where a roof meets a frame

SoundCovering tight to the timber, verge bedded, no staining on the frame
Needs workGap at the frame, bedding fallen out, damp marks down the timber

Where the covering meets the frame, the timber tells you first, so we read it before we read the tiles.

Callout 2 of 3

The Old Cottage, the Old Forge and Bank Cottage

Callout two is the wall of a listed cottage. At the 2021 Census, Longhope parish had 1,555 usual residents, according to the ONS, and its entries on Historic England's list include these three. The Old Cottage is Grade II (list entry 1186504, first listed 13 June 1977). The Old Forge is Grade II (list entry 1099920, first listed 4 July 1985), and Bank Cottage is Grade II as well (list entry 1186503). A listing protects the whole building, so a roof, a chimney or a flashing on any of the three is part of a protected structure.

Under section 7 of the 1990 Act, anything that would alter what makes a listed building special calls for listed building consent. Permitted development rights remain on a listed house; the consent requirement is laid on top of them. The choice of covering, the lead details and the method of work are settled with Forest of Dean District Council first, and the photographs from the survey form the record of what was there.

Where a roof meets a chimney or a wall on a cottage like these, the junction is sealed with lead. Royston Lead's table lists Codes 4, 5 and 6 for flashings, and Code 3 is "Recommended for lead soakers only". MyJobQuote says correctly installed lead flashing "can last for over 80 years", so sound lead is left untouched. Lead that has come away from its joint is dressed back, and split lead is cut away and a new piece let in.

The village also has Longhope Conservation Area, which is Forest of Dean District Council's. Forest of Dean District Council sees any Longhope dormer inside the area before it is built. Whether an Article 4 direction applies to your address needs asking of Forest of Dean District Council, because a direction can take away further rights. For roof windows the conditions sit in our planning guide for roof windows, which is worth reading before you plan one.

Building control for a Longhope address is Forest of Dean District Council Building Control, on 01594 812315, or a registered building control approver. Protected buildings are covered on our listed and heritage roofing page, which follows a job from survey through to sign-off.

Listed cottage, roof work

Do repairs to a listed Longhope cottage roof need consent?

Under section 7 of the 1990 Act, listed building consent covers works that alter a listed building's character, and permitted development stays with the house as well. Ask Forest of Dean District Council before any covering or lead is changed, and keep our survey photographs with the application.

Fig. 3 Wall abutments, drawn close

Callout 3 of 3

Underlay, eaves air and the old cottage loft

Callout three is the eaves. When an old roof is re-covered, the underlay goes in first, and the type chosen decides how the loft must be ventilated. Underlay comes in two families. High-resistance (HR) sheet is not vapour-permeable, while air-permeable (LR) sheet lets a little air through. Marley says that beneath HR underlay a cold roof needs a 25mm opening running the full length of the eaves where the pitch is 15 degrees or less, and 10mm where it is steeper. Where an air-permeable sheet is laid over a ceiling that has been properly sealed, Marley accepts "fortuitous ventilation" of 3mm through ordinary eaves construction, provided the certification conditions are met in full.

BS 5250 is the code of practice for condensation in buildings, and it is listed as current and under review. On a cottage with a cold loft, we look at the eaves first: whether the gap exists, whether insulation has been pushed into it, and whether the ceiling below is sealed. A new underlay over a blocked eaves can leave a loft damper than before the job, so the ventilation detail goes into the written price as part of the work, never as an extra.

A full re-roof is a bigger undertaking than a repair, and the survey says which one your roof needs. The Planning Portal's rule for England has two limbs that must both be met before an application is normally unnecessary: less than 25 per cent of the building envelope and less than 50 per cent of the roof affected. Approval is also needed where a new covering exceeds the old one in weight by 15 per cent or more, with a structural check before the order goes in. Our roof replacement page covers the process from strip to ridge.

Scaffold on a Longhope road takes a licence under section 169 of the Highways Act 1980. Gloucestershire County Council is the highway authority, so the licence comes from it. We arrange the licence with our scaffolder, which leaves one written total with nothing hidden. Should a Longhope house front a main road, the council is asked before booking.

Words in a Longhope loft

HR underlay
High-resistance underlay, not vapour-permeable, so the eaves must vent
LR underlay
Air-permeable underlay that can rely on small eaves gaps
Wall plate
The beam along the wall top that the rafters rest on
Cold roof
A roof with insulation at ceiling level and a ventilated loft above

Longhope roofs: frames, listings and loft air

What should be checked where a Longhope timber-framed roof meets its gable?

The checks are for open joints between covering and frame, verge mortar that has crumbled and dark runs down the timbers. In the roof space, we study the timber at the top of the wall, with the rafter feet resting on it, for signs of damp, and we photograph what we find there. Each finding is photographed, and if the frame needs attention first, the report puts that ahead of any new covering for the roof.

Which Longhope cottages are listed, and what follows for their roofs?

The Old Cottage (list entry 1186504), The Old Forge (list entry 1099920) and Bank Cottage (list entry 1186503) are each listed Grade II. Section 7 of the 1990 Act applies to work that affects the character of a listed building, so Forest of Dean District Council is asked first. Whether your own house is listed is shown on its Historic England entry.

Does Longhope Conservation Area limit what I can do to my roof?

Its main effect on a roof falls on dormers, so speak to the council before one is sketched. Forest of Dean District Council holds the map for Longhope Conservation Area, so lay your address against its boundary before you plan a change. Ask the council whether an Article 4 direction applies too, and read our planning guide before planning any roof window.

Does a new underlay change how a Longhope loft is ventilated?

It can. Marley puts the opening for a cold roof under non-permeable HR underlay at 25mm of eaves ventilation for pitches of 15 degrees or less and 10mm above that. An air-permeable underlay over a sealed ceiling can rely on 3mm of fortuitous ventilation, as long as the certification conditions are satisfied. We check the eaves before choosing the underlay, then photograph the result.

Is there a licence fee for scaffold on a Longhope road?

Gloucestershire County Council's scaffolding and hoarding licence costs £145 for a minimum period of 28 days, with extensions at £36 per 7 days, and applications go in at least 12 calendar days ahead. We arrange the licence with our scaffolder, so the written price already carries the scaffold and no separate bill follows later. A main road past a Longhope house is a question for the council to settle before dates.

When does building control become involved in a Longhope re-roof?

In England the Planning Portal's test is less than 25 per cent of the building envelope and less than 50 per cent of the roof affected. A covering that raises the weight by 15 per cent or more needs approval as well. Forest of Dean District Council Building Control, or a registered building control approver, answers the question for your own roof.

Show us where the Longhope roof meets the frame

Photographs of the verge, the eaves or the loft timbers will do to start; a survey and one written total follow.

10-year workmanship guarantee, in writing