Callout 1 of 3
The frame behind the brick
The Victoria County History's 1972 account of Blaisdon describes "A timber-framed cottage later faced in brick" at the south end of the village, which kept the remains of a cruck-truss until it was rebuilt in 1969. The same account says The Tanhouse, now listed Grade II, "has a 17th-century timber-framed range dated 1669" that was faced in brick about 1800. Take those two as a reminder, not a rule. A cruck is a pair of curved timbers rising from the wall towards the ridge, doing the work of post and rafter at once, and a brick face can hide it completely. When nothing outside gives the timbers away, our survey goes inside to look for them.
In the loft we follow each timber to the point where it meets the wall, and look at every joint where one timber bears on another. Pressed with a thumb, sound wood resists and decayed wood gives, so a soft end is photographed with a pen laid beside it for scale. Outside, the questions are different: whether the covering is lying flat across the old frame, whether a valley or a flashing has leaked, and whether a gutter has been spilling onto the brick below.
The reason is simple. A slow leak above a hidden frame leaves damage that nobody sees until the repair has grown beyond the single tile that slipped. We tell you what we can see, what we cannot, and which places would need opening up before a firm total could be given, and the photographs record every one. Where timbers are sound, the roof is made watertight above them and they are left alone.
Where brick has been added to a frame, a flashing is chased into the brick joints and never into the timber behind, so the dressing can be renewed later without disturbing the old wood. The same thinking applies at the verge and around a stack: the lead is fixed to the newer skin and lapped over the covering.
Work on an old frame can take in the chimney, the verge and the line of the eaves in one visit. Our roof inspections page describes what a survey records and how the photographs are presented to you afterwards.
Before anything is opened
Can a brick-faced timber frame be checked without stripping the roof?
Much of it can. We read the timber ends and joints from the loft, photograph them, and open only the places where the photographs leave a doubt. Stripping a slope is a decision for after the survey, not before it.
Sound timber resists a thumb and decayed timber gives, so we press before we write.















