Callout 1 of 3
The ridge line above a Lower Bullingham house
The ridge runs along the top of a pitched roof, where two slopes meet. Along it sit capping tiles, laid on mortar or fixed with mechanical clips and screws, a method that BS 8612 covers. On a hipped roof each hip, the sloping outer corner, carries its own row of capping. On our first pass we walk the line from end to end, press on every capping tile and note the ones that shift under a hand.
Mortar cracks as it weathers. Once the bed opens, rain runs in beneath the capping and onto the top course of the roof. Marley, the tile maker, explains that mortar was no longer enough by itself to secure a covering once the 2015 amendments arrived, although following BS 5534 is not in itself a legal duty. When we reset a ridge, each capping tile is mechanically fixed and also set on a fresh bed, so the ridge has two lines of defence instead of one. A plain bedded ridge can stay as it is where it suits the building, and a dry-fix ridge is quicker to reset because there is no mortar to crack.
The places where a ridge meets a hip get a second look, because two lines of capping come together there. From inside the loft, where there is access, a chink of daylight along the ridge tells us the bed has failed, and we mark it on the photographs to let you trace the line.
A rebedded ridge is a repair. A worn covering can lead to a re-roof, though, and that raises the approval question. Lower Bullingham is in England, so the Planning Portal asks two things: is less than 25 per cent of the building envelope affected, and is less than 50 per cent of the roof affected? Where the answer to each is yes, no application is normally required. If the new covering would weigh 15 per cent or more above the old, Building Regulations approval is required, and a structural check comes first. Adding insulation during the same job brings in AD L, whose figures differ for a new roof and a renovated one, so we raise it with building control at the start.
Our roof repairs service covers a ridge on its own. You get photographs of every capping tile before the work and after it.
Checked along a Lower Bullingham ridge
- Capping tiles that rock or lift
- Mortar bed open at the joints
- A mechanical fixing on every tile
- Hip ends where the lines meet
- The end tile at each gable
The ridge keeps out the first rain of every storm, so it is where we start.















