01432 610152 Get a quote Call 01432 610152

Roofers in Littledean

Slate, gutter and listed-building roof work in Littledean, around the Grade I church and Dean Hall.

Heading south-east from central Hereford, Littledean is 25.6 road miles on; each visit ends with photographs and one written total price.

Get a free quoteCall 01432 610152

Littledean's sandstone houses, slates and gutters

  • Older cottages with weathered clay tile roofs and brick chimneys behind a flint wall
    Slate roofs and their fixingsNail or hook, pitch and overlap decide how long a slate roof stays tight.
  • Slate roofs and chimney stacks along a red brick Victorian terrace
    Gutters beside stone wallsA leaking gutter soaks the wall below it as well as the fascia.
  • Newer homes with grey concrete tile roofs along a curving estate road
    Grade I and Grade II* neighboursSt Ethelbert's, Dean Hall and Court House are listed, so consent comes first.

Our map around Littledean

Littledean on a street map, with a dashed circle around the town and the nearest towns we cover. Tiles © Esri; map data © Esri, HERE, Garmin, OpenStreetMap contributors.

Slate, gutter and listed wall

Reading a Littledean roof: slate and fixings, gutters beside stone, then the listed buildings

A Littledean survey runs in three parts. First the slope, where slate pitch and fixings decide how long a covering lasts; then the gutters that guard the stone walls below; last the listed buildings and the conservation area.

A drawn cut-away section through a Herefordshire border house: the front of the main roof is cut open to show the rafters, underlay, battens and slates, beside a black-and-white timber-framed gable. Numbered, from the ridge down: 1 Slate slope; 2 Gutter line; 3 Listed walls.

Fig. 1 A Littledean roof in section: slate slope, gutter and listed wall, numbered 1 to 3.

Callout 1 of 3

Slate roofs: pitch, fixings and how long they last

If your Littledean roof is slate, the first things we want to know are its pitch and how each slate is held. Slate is natural stone split into thin sheets and hung in overlapping courses, and according to SPAB, Welsh slate and stone roofs "are predominantly double-lapped". In plain terms, each slate reaches down over the course below it and the one beneath that, and the slates are staggered so that the vertical joints never line up.

Fixing is the next question. Slates are held by nails, or by hooks where the pitch allows. Cupa, the slate supplier, advises against hooks on any pitch under 25 degrees, and it reports that BS 5534:2014+A2:2018 "also indicates that the minimum roof pitch for natural slate is 20 degrees in the case of a project situated in an area with moderate exposure and with a slate 500mm long and a 115mm overlap". Each of those conditions counts, which is why we measure the pitch and the slate length before saying what can be done.

Age comes after that. HomeBuilding gives Welsh slate "100+ years", Spanish slate "75-100 years" and reclaimed Welsh slate "50-80 years", and SPAB says the life of a well-slated roof is "likely to be more than 100 years". Such figures describe slate in general and promise nothing about your roof, and a slate can outlast its fixings. Rusted nails, not the slate itself, can be what lets slates slip, so when the nails have gone we strip, sort and refix the sound slates, and replace only the ones that have broken.

For a bigger re-slate in England, the Planning Portal's test is less than 25 per cent of the building envelope and less than 50 per cent of the roof affected, and below both no application is normally needed. Our slate roofing page goes through repair and re-slating in more depth, and each slipped or broken slate we find is photographed, with the nail beside it where one has failed.

Matching is the last point. A replacement slate is chosen for size, thickness and colour, so that a patch does not stand out from the road, and sound slates stripped from one slope can be set aside for use where a gap has opened elsewhere. SPAB's advice on sourcing applies here: do not accept that a slate cannot be had until the quarries themselves have been asked.

Fixings and pitch

Can slate hooks be used on a low pitch?

Cupa advises against hooks below 25 degrees, which means a shallow slope is nailed instead. That is one reason we measure the pitch before choosing how to fix.

A slate may not be the weak part; the nail that holds it can be the first question we ask.

Fig. 2 The slopes, drawn close

Callout 2 of 3

Gutters, downpipes and the stone walls beneath them

A gutter has one job, and the wall below pays when it fails. The Victoria County History's 1996 account of Littledean says: "Many of the houses were rebuilt in the local sandstone in the 18th and 19th centuries". A stone wall that is wetted again and again by an overflowing gutter holds the damp, and the wall, not just the fascia board, takes the harm. So the gutter line gets as much attention from us as the slope above it.

The fall matters first. Brett Martin's guidance is "1mm for every 600mm", so a run that sags will hold a puddle, overflow at the low point and spill down the face. Next come the brackets, which loosen over the years and let a run drop, then the joints, which weep where the seal has aged, and last the outlet and the downpipe. A downpipe that ends against the wall foot rather than at a drain wets the stone from below.

Behind the gutter sit the fascia board and the soffit. Rot spreads from a weeping joint into the board, and a soft board cannot hold a bracket for long. We probe along the fascia with a point, and the report separates a board that can be capped from one that has to be replaced. The same look at the eaves tells us whether the rafter ends behind the board are still sound.

After clearing a run we pour water into it and watch. A sag, a weeping joint or a blocked outlet shows up faster that way than by looking. On an older house the gutter may be cast iron on brackets or a hopper head at the top of a downpipe; rust at a joint can be mended by replacing a section, and the profile is kept to suit the building. On a listed house, a change of gutter material can alter the character of the elevation, so the council is asked before anything is swapped.

Gutters and the boards behind them travel together, and our guttering, soffits and fascias page covers repair, replacement and the roofline in more detail.

A gutter run, part by part

Brackets
Refixed at a steady fall where they have loosened
Joints
Resealed or replaced where they weep
Outlet
Clear, with the downpipe below running free
Downpipe
Empties to a drain, not against the wall foot
Fig. 3 Gutters and downpipes, drawn close

Callout 3 of 3

St Ethelbert's, Dean Hall and Court House

Last comes the wall. Littledean's parish had 1,329 usual residents at the 2021 Census, and Lydney station is 7.5 miles off in a straight line. The Church of St Ethelbert is Grade I (list entry 1186482, first listed 23 September 1955). Dean Hall is Grade II* (list entry 1186495, first listed 23 September 1955), and so is Court House (list entry 1186859, first listed 23 September 1955). Church Farm House and Maltings is Grade II (list entry 1186481). Forest of Dean District Council holds the Littledean Conservation Area, and the survey notes where your roof sits against its boundary.

St Ethelbert's is Anglican and still keeps a Sunday morning service, which places any work on its roof inside the diocese's faculty system rather than the council's listed building consent, and our first call is to the parish. For the houses and halls, section 7 of the Planning (Listed Buildings and Conservation Areas) Act 1990 applies to works that would affect "its character as a building of special architectural or historic interest". A listed house keeps its permitted development rights, and consent from the council is a further requirement.

We treat a protected roof as something to be recorded before it is repaired. Each slope is photographed, the covering is measured and its fixings noted, and lead, stone and timber are marked on a sheet. That record goes with a consent application, so Forest of Dean District Council can compare what exists with what is proposed. Where the covering has to change, the reason goes in the report.

A conservation area does not forbid repair. Like-for-like work on a house is normally permitted development in England, and where planning permission is wanted, it is planning permission that is applied for, never a separate consent. The boundary and any Article 4 direction are what need checking first.

Ask Forest of Dean District Council whether an Article 4 direction applies at your address. A dormer or roof window is a planning matter of its own, and our planning guide for roof windows covers it. Building control is the council's own team, on 01594 812315, or a registered building control approver if you prefer one. Our listed and heritage roofing page sets out how we handle roofs on protected houses.

What shapes a Littledean quote

Consent route
How long agreeing materials with the council takes
Scaffold
Whether the highway is involved
Covering
Slate to match, or a new covering
Timbers beneath
How much batten and rafter needs repair

One written total price, never itemised.

Littledean roof questions: slate, gutters and listed walls

How can you tell if a Littledean slate roof needs repair instead of replacing?

We check the pitch, look for slipped and broken slates from outside, and examine the underside from the loft for daylight and damp. If the nails have rusted but the slates are sound, they can be stripped, sorted and refixed. Replacement is offered when most of the slates have failed, not before. Photographs of the nails and slates concerned come with your report.

Does the age of a slate roof decide whether a Littledean house needs a re-roof?

Not on its own. HomeBuilding gives Welsh slate "100+ years", Spanish slate "75-100 years" and reclaimed Welsh slate "50-80 years", while SPAB says a well-slated roof is "likely to be more than 100 years". Those ranges are typical and promise nothing. Because the fixings can wear out first, a re-roof is sometimes a refix of the existing slates, which keeps the look of the house.

What fall should the gutters have on a Littledean stone house?

Brett Martin's guidance is "1mm for every 600mm" along a run. Where a length holds a puddle or weeps at a joint, it has slipped from its line, and on a stone wall the damp left behind does more harm than a stain. We reset the brackets, check the joints and the outlet, and run water through the gutter afterwards to show it flows.

Does the roof of St Ethelbert's need listed building consent from the council?

No. St Ethelbert's is Anglican and holds a weekly Sunday service, so its roof goes through the faculty system. St Ethelbert's is Grade I (list entry 1186482). A church that has closed would need consent from Forest of Dean District Council instead. Before we price, we ask the governing body to confirm the route, so there is no doubt about it.

Does swapping a gutter on a listed Littledean house need consent?

It can. Under section 7 of the 1990 Act, works that would affect a listed building's character need consent, and a change in gutter material can alter an elevation. Matching what is there is the simplest case. Ask Forest of Dean District Council before anything is ordered, and keep the photographs from the survey to show what the existing run looks like.

What is the scaffold licence position on a Littledean road?

Section 169 of the Highways Act 1980 requires a licence before scaffold goes up on the public highway. Gloucestershire County Council sets its scaffolding licence at £145, for 28 days at the minimum, and £36 per 7 days for each extension, and wants a gap of at least twelve calendar days between application and erection. The licence application goes through our scaffolder, and the scaffold falls within the written total. The notice period is planned into the date we propose.

Ask for a Littledean roof visit

Tell us about the slate, the gutter or the listed front, and the visit leads to photographs and one written price.

10-year workmanship guarantee, in writing