01432 610152 Get a quote Call 01432 610152

Roofers in Ruspidge

Roof repairs in Ruspidge, from a Grade II Methodist church to loft conversions and soffits.

We photograph what we find on your roof, explain which rules apply, and put one written total price to you after the survey.

Get a free quoteCall 01432 610152

Where Ruspidge roofs need a closer look

  • Older cottages with weathered clay tile roofs and brick chimneys behind a flint wall
    Chapel gables and vergesA tall gable edge takes the wind, and its bedding loosens first.
  • Slate roofs and chimney stacks along a red brick Victorian terrace
    Loft conversions and roof windowsA new window in a slope adds a flashing and rules to follow.
  • Newer homes with grey concrete tile roofs along a curving estate road
    Old soffits and eaves boardsBoards from before 2000 may contain asbestos, so testing comes first.

Ruspidge in the Forest of Dean

Ruspidge on a street map, with a dashed circle around the town and the nearest towns we cover. Tiles © Esri; map data © Esri, HERE, Garmin, OpenStreetMap contributors.

Ruspidge roofs from chapel gable to soffit

Three things to know before roof work in Ruspidge: the gable, the window and the soffit

In Ruspidge we begin at the gable edge, where a chapel and the village houses meet the wind, then look at roof windows in loft conversions, and end under the eaves, where old boards can hide asbestos and the council rules apply.

A drawn cut-away section through a Herefordshire border house: the front of the main roof is cut open to show the rafters, underlay, battens and slates, beside a black-and-white timber-framed gable. Numbered, from the ridge down: 1 Gable verge; 2 Roof window; 3 Soffit and eaves.

Fig. 1 A Ruspidge roof in section: gable verge, roof window and soffit, numbered 1 to 3.

Callout 1 of 3

The gable edge, church and houses alike

Ruspidge Methodist Church is Grade II (Historic England list entry 1213344, listed on 24 September 1984). A gable edge is the part of a pitched roof that meets the wind head-on, and the border of covering along it is the verge. We check it from the ground with binoculars first, and after that from a ladder or access tower up close, because a verge that looks level from the road can hide a row of tiles that have lost their bed.

Verge detail comes in two kinds. The older method points the last tiles in mortar. The newer one uses a dry-fix unit held with clips or screws, a system BS 8612 sets out. The tile maker Marley notes that "Installing to BS 5534 isn't required by law", while the 2015 amendments made it clear that mortar "could no longer be relied upon as the only means of securing the roof covering". For us that means a mechanical fixing on the end tiles, whichever finish the building has. A church in use is handled differently from a house, so we keep two questions apart: the repair itself, and who has to approve it.

On approval, the Methodist Church is one of the denominations that holds an exemption from listed building consent for church buildings in use, and it runs its own system for works. If the building closed for worship, that would change, and the council would decide under section 7 of the Planning (Listed Buildings and Conservation Areas) Act 1990. Which route applies is settled by a call to the church's governing organisation before we price anything, because a quote built on the wrong route wastes everyone's time.

Houses in the village take the same verge repair without the extra step, unless they are listed themselves. The parish of Ruspidge and Soudley counted 2,861 usual residents at the 2021 Census, and for a home the roof repairs page covers the jobs that a few hours on a tower can deal with. Anything larger, such as relaying a whole gable slope, is quoted separately once the survey photographs are in, and the price reflects the scaffold the work needs. If the gable is part of a boundary wall shared with a neighbour, we raise the party wall point early, since the owner's party wall notice must go out at least 2 months before such work.

Gable edge, checked from above and below

  • Verge mortar cracked or missing
  • End tiles lifting under a gloved hand
  • Clip or screw under each end tile
  • Barge board or cloak tile condition
  • Listing and approval route confirmed

A gable edge that looks level from the road can hide a bed that has gone.

Fig. 2 The verge, drawn close

Callout 2 of 3

Roof windows in loft conversions: energy and fire

A roof window sits in the slope flush with the covering, a glazed unit admitting daylight to a loft conversion. Fitting one means cutting rafters, forming a lead or aluminium flashing around the frame, and meeting two sets of rules. The flashing deserves its own care, because a leak at a window frame is slower to trace than a missing tile, and the lining under the covering has to be dressed up and over the frame in the right order, so the survey photographs of the finished work show each stage. For the energy rules, England's Approved Document L, 2021 edition, sets the standard until 24 March 2027, when the 2026 edition takes over.

Table 4.2 of the 2021 edition covers new elements fitted to an existing dwelling. It gives a new roof 0.15; for windows, roof windows included, the figure is 1.4, with Band B of the Window Energy Rating scheme as the other route. Rooflights are allowed 2.2 W/(m2.K). The figure of 2.2 is for rooflights, not roof windows. Table 4.3 applies when you renovate or convert a loft: the roof has a threshold of 0.35 and an improved figure of 0.16. Paragraph 4.13 offers a relaxation. Where the improved figure cannot be met in practice, or the savings would need over 15 years to pay for it, the upgrade settles at the best feasible U-value, and the paragraph says that value generally should not exceed 0.7.

Fire safety is separate. England's Approved Document B (2019 edition incorporating 2020, 2022, 2025 and 2026 amendments) says in paragraph 2.5 that a storey more than 4.5 metres up needs a protected stairway, with an alternative escape route as the other option, a situation a loft conversion can trigger. Escape windows under paragraph 2.10 are meant for storeys within 4.5 metres of the ground. Building control checks both. For Ruspidge that is the district council's own team, on 01594 812315, or a registered building control approver.

Planning is a third matter. Our planning guide for roof windows holds the permitted development conditions, so check it ahead of ordering any window. If your house is flats, its rights differ from a house's, and if it is listed, consent comes on top. Lofts also hold wildlife: a conversion that touches a roost may need a licence from Natural England, so we look in the roof space before drawings are finalised.

Energy figures in England, AD L 2021

New roof, existing dwelling
0.15 (Table 4.2)
Roof window
1.4 or WER Band B
Rooflight
2.2
Loft conversion, roof
Threshold 0.35, improved 0.16 (Table 4.3)
Fig. 3 Roof windows, drawn close

Callout 3 of 3

Soffits, asbestos and the council's rules around Ruspidge

The soffit is the board that closes the gap beneath the eaves, and on older roofs it can be the one place asbestos hides in plain sight. HSE says: "If the building was built or refurbished before 2000, assume that there is asbestos in it." Its location list names white asbestos insulating board (AIB) panels under the eaves. Removing AIB is usually licensed work, so we hand that kind of job to a licensed firm and leave the boards alone. Asbestos cement roof sheeting is another matter: HSE classes careful removal, with the sheets kept whole, as work that needs no licence, yet HSE also warns that sheeting of this kind is always fragile, so nobody walks across it without crawling boards. The waste goes into a lockable skip on HSE's advice, never an open one. Our guttering, soffits and fascias page covers the renewal side.

If the boards test clear, uPVC is one option for the replacement. One plastics retailer, a seller with an interest, says uPVC fascias can maintain reliable performance for between 20 and 40 years. Brett Martin, a gutter maker, recommends a fall of "1mm for every 600mm", and a run laid to that line carries water away from the soffit.

Ruspidge lies 27.1 road miles to the south-east of central Hereford, and the drive takes around 52 minutes. Littledean Conservation Area is the closest, and Forest of Dean District Council can say if your property is within its line, and whether an Article 4 direction applies. A re-roof in England stays inside the Planning Portal's limits while it touches under 25 per cent of the building envelope and under 50 per cent of the roof. The nearest station is Lydney, 6.3 miles off as the crow flies.

Scaffold standing over a road or footway has to be licensed (section 169 of the Highways Act 1980), so any eaves renewal that needs access from the street raises the point. We settle the lead time at survey so that the date you are given is a real one.

A question about old soffits

How do I know whether a soffit board contains asbestos?

Looking will not tell you. HSE's advice for any property put up or refurbished before 2000 is to work on the footing that asbestos is in it, and only analysis of a sample settles the matter. We leave the boards up until the result is back, and a licensed firm does any licensed removal.

Ruspidge roofs: the chapel, loft windows and soffits

Who approves roof work on Ruspidge Methodist Church?

The church is Grade II (list entry 1213344). While a Methodist church is in use for worship it holds an exemption from listed building consent and runs its own approval system for works. If it closed, the council's consent would apply instead. We contact the church's governing body before pricing, because the route decides who must see the plan first.

Will a roof window in a Ruspidge loft conversion meet the energy rules?

It has to meet the window figure in AD L 2021 Table 4.2, which is 1.4 or WER Band B. The 2.2 figure applies to rooflights only. Insulating the sloping roof around the window falls under Table 4.3, with a threshold of 0.35 and an improved figure of 0.16. We confirm the product and the build-up with building control before ordering.

Do old soffits at Ruspidge contain asbestos?

Some may. For any building built or refurbished before 2000, HSE's line is to treat asbestos as present, and its location list includes white insulating board soffit panels. Only analysis gives a firm answer, and the board stays where it is until then. Removing insulating board is normally licensed work, done by a specialist firm, while asbestos cement is lifted whole and carefully. Our report shows photographs of where the boards sit and says which parts of the eaves can proceed and which must wait for a laboratory result.

Is Ruspidge inside a conservation area?

Littledean Conservation Area is close, and Forest of Dean District Council holds the boundary. The council answers whether your address lies inside, and also whether an Article 4 direction applies. We raise both at the survey and write the answer into your report, because it affects what can be changed on a slope that faces the road, and you may want it on file.

What is the fee for scaffold on a Ruspidge road?

Gloucestershire County Council charges £145 for a scaffold licence over a minimum of 28 days, and £36 per 7 days for an extension. It also wants at least 12 calendar days before it is needed, and we arrange the licence with our scaffolder. We would raise any access problem, such as a narrow footway or parked cars, at the survey, before any start date is promised to you, and your date allows for the wait.

Does a re-roof in Ruspidge need Building Regulations approval?

Ruspidge is in England, so the Planning Portal sets the limits: under 25 per cent of the building envelope and under 50 per cent of the roof, and normally no application. A heavier covering, 15 per cent or more, needs approval, and re-insulating the roof means Part L applies. Call Forest of Dean District Council Building Control on 01594 812315 for the answer on your own house.

Ask for a Ruspidge survey, gable first

Say whether a gable, a loft window or old eaves boards concern you, and the survey covers it, with the total set out in writing.

10-year workmanship guarantee, in writing