Herefordshire has a long record of making things from its own clay. Where a house here wears a roof of small clay plain tiles, the tiles belong to that tradition, and a repair that ignores their size, colour and the way they hang can leave a patch that looks wrong for decades.
A plain tile is a small, flat or gently curved clay tile, laid in overlapping courses and hung on timber battens by a nib, the lug on its back. Every course is laid so that its tiles cover the gaps between the tiles beneath, which gives plain tile roofs their close, textured look. They shed rain by lap rather than by interlocking, so one cracked or slipped tile leaves a gap that nothing else closes.
The sections below cover the county's clay, how to look after a clay roof, how single tiles are replaced and matched, how long clay is expected to last and where the two countries part company. They sit within our pitched roofing work.
Herefordshire clay and the county tile works
The county's building stone atlas, published in 2012 as part of the Strategic Stone Study and hosted by Herefordshire Council, says the Raglan mudstones "have been used as a source of clay for the famous Herefordshire brick, tile and pipeworks industries". It also records that "Some 250 brickworks are listed in the Herefordshire Sites and Monuments Record."
That gives a real reason to care about the clay on a Herefordshire roof. The county made bricks and tiles from its own ground, and the roofs that carry them are part of the local building record.
The county's stone roofs are a separate tradition. The atlas treats the St Maughans sandstones as the leading source of Herefordshire stone roofing, so a clay roof sits beside those, not in place of them. If your house has stone tilestones, our guide to repairing a stone tile roof is the better starting point.
At survey, the first job on a clay roof is to identify the tile: its size, its range of colour, whether it was hand-made or machine-made, and how it is fixed. That identification shapes every repair that follows, from a single replacement to a full re-cover. A maker's stamp or a distinctive finish on the underside, seen from the loft, can help name a tile, and we photograph it for your file. If the tile cannot be named, a sample taken from a hidden slope is the safest guide to its colour and size.
How a plain tile roof is built
A plain tile roof depends on lap. The tiles are small, so there are a great many of them. The battens set the spacing, the nibs hook over the battens, and nails or clips hold the tiles down. Ridge tiles cap the top and hip tiles cover the sloping corners. Valleys, where two slopes meet, are formed with special tiles or lined with lead. A pantile, like the Lincoln in the table, is a different shape: an S-profile tile that interlocks sideways, which is why its minimum pitch can be so much lower.
The pitch matters, because a small tile sheds rain well only on a steeper slope. Marley publishes minimum pitches for its clay tiles, and they vary widely by product.
| Marley clay tile | Minimum pitch |
|---|---|
| Canterbury | 40 degrees |
| Ashdowne | 35 degrees |
| Hawkins | 30 degrees |
| Acme Single Camber | 30 degrees |
| Lincoln (pantile) | 15 degrees |
Marley's own advice is to check the product data sheet. These figures belong to Marley's products, and an old roof may carry a tile from another maker that no catalogue lists. Our short answer on what pitch clay tiles need explains how to read the figure for your own roof.
Beneath the tiles, the battens and felt do the hidden work. When either has failed, the tiles above lose their fixing, and the roof has to be stripped to reach them.
Looking after a clay roof from the ground
Looking after a clay roof starts with observation. A look with a pair of binoculars from the lawn or the lane, once a season and after a storm, is enough to catch changes early.
- Slipped or missing tiles show as a dark gap, or a tile hanging below its course
- Cracked tiles show as a line, sometimes with a chip missing from the lower edge
- Moss and lichen sit on the surface and in the laps, holding moisture against the clay
- Mortar crumbling at the ridge or verge shows as grit in the gutter or on a path
- An overflowing gutter soaks the lowest courses and the wall beneath
Keep off the roof. Walking on clay plain tiles cracks them, and a tile cracked by a foot may not leak until the next heavy rain. Marley lists incorrect access, where walking on the tiles takes place, among the things that can shorten the life of a tile roof.
Cleaning needs care. Marley says "The use of high powered jet washes is not recommended as it can damage the surface of the slate or tile, thus reducing its expected life considerably". Brush moss off gently from a safe position, or have it treated. Checkatrade (April 2026) gives roof cleaning as £8.50 to £14 per m², with biocide treatment around £11.50 per m². Those rates are per square metre and describe no particular house.
Gutters and downpipes belong to the roof's care. Clearing them before autumn costs little against the damage an overflow can do to the eaves courses.
Replacing single tiles and matching them
One cracked tile can be swapped without disturbing the courses around it, provided the tiles above are lifted carefully and the replacement fits. The difficulty is the match. Hand-made clay varies from tile to tile in colour, thickness and camber, and weather darkens the surface over time, so a new tile can stand out against the old.
- Reclaimed tiles of the right size are the first choice for a visible slope, because their colour has already weathered.
- New tiles suit a back slope, a lower roof or any place hidden from the road.
- Mixing sources across one slope looks patchy, so we gather the odd tiles into a single area where we can.
Our short answer on mixing old and new roof tiles sets out the trade-offs.
Whatever the source, a replacement needs the same size, thickness and nib position as its neighbours, or it will sit proud of the course or rock under a foot.
As third-party price guides, In its November 2025 survey (ex VAT), Which? found that replacing between one and six standard tiles that were broken or gone cost £75 to £400, and that a new ridge tile cost £80 to £300. Checkatrade (June 2026, ex VAT, up to 3 m²) gives clay tile repairs as £110 to £160 per m², and ridge or lead flashing as £50 to £70 per metre. None of these is a quote for your roof.
Photographs of the cracked or slipped tiles we find come to you after the survey, with one written total price.
Matching the roof: consent and planning in England and Wales
Whether a roof must be matched in law depends on the country and on the house.
- In England, re-roofing falls under Class C of the permitted development rights, and that Class has no matching-materials condition attached. A mismatched repair can be lawful and still look wrong.
- In Wales, Class C.2(a) of the 1995 Order requires that materials "so far as practicable match" those of the existing dwelling in appearance. A change from clay to a different-looking covering falls outside it.
- In England and in Wales alike, a listed house keeps its Class B and Class C rights but needs listed building consent on top, so a change of covering goes to the council first.
- In England, Herefordshire Council says there are 64 conservation areas in the county, and the council can say whether an article 4 direction applies to a particular house.
- In England, a flat has no householder permitted development rights, so work on a flat's roof goes through the council.
- In the Bannau Brycheiniog National Park, check with the National Park Authority.
SPAB's note on the region's stone and slate roofs says: "Unfortunately, many are changed to different stones or even to slates or fake stone slates." The loss of a matching covering is hard to reverse, and the same care applies to clay.
Our guide to roof window planning rules in England and Wales covers the separate planning rules for roof windows.
How long clay lasts, and when to re-cover
Treat any lifespan as a range for a roof laid correctly and kept in repair. Marley says "For clay roof tiles, the BRE determined a minimum life expectancy of 60 years", and adds that as a fired natural material the working life could be significantly longer. That 60-year minimum belongs to clay alone, not to concrete. HomeBuilding (30 September 2025) gives 60 to 80 years, approximately, for clay tiles. Marley says plainly that its 60 years is not a guarantee. Our short answer on how long clay tiles last goes through the range.
The tiles can outlast what is under them. When the battens and felt have failed, or when tiles have lost their nibs, the sensible course is to strip, renew the timber and felt, and relay the sound tiles, topping up with reclaimed ones where needed. We photograph what comes off, so you see which tiles were saved.
Re-covering is also a Building Regulations matter, and the tests differ between England and Wales. Building control confirms which applies before the strip starts. The tests themselves, with their sources, are set out in our guide to battens and felt renewal.
A re-cover is also the moment to deal with the ridge and verge properly. Marley says the 2015 amendments to BS 5534 required single-lap and ridge and hip tiles to be mechanically fixed whether or not mortar is used. A change from clay to a heavier or lighter covering is a separate step and needs its own check with building control before any tile is ordered.
