A concrete interlocking tile is a large press-moulded tile with a groove along its sides that locks into the next one. Because the tiles are big and lock sideways, a single tile covers the area of several plain tiles. That is the whole idea of the design, and it explains both how these roofs behave and how they fail.
The tiles overlap their neighbours only at the head of each course, which roofers call a single lap. The joint between courses carries less margin than on a roof of small, double-lapped tiles, so the pitch, the fixings and the underlay beneath all matter more. A roof of this kind relies on every nail, clip and batten doing its share of the work.
Below, we go through the layout of the roof, the pitch limits, the fixing rules, the ways it fails and the approval rules for each country. If the roof in front of you is covered in something else, the rest of our pitched roofing pages cover the other coverings.
What interlocking means on a pitched roof
On an interlocking tile, a raised rib along one side fits into a channel on the next tile, forming a continuous side-lock across the course. Water that reaches the joint runs along the channel and down. The head of each tile is overlapped by the course above, and the nib on the back hooks over the batten. Tile length and the width of the side-lock differ between profiles, which is one reason a replacement cannot be just any tile that looks close.
| Feature | Interlocking concrete tile | Plain tile |
|---|---|---|
| Size | Large, covers an area in one tile | Small, many to the area |
| Lap | Single, at the head | Double, each joint covered twice |
| Side joint | Locks into a channel | Covered by the next course up |
| Fixing | Nail or clip into the batten | Nibs and nails |
BS 5534 treats the two differently. Marley records that the 2015 amendments required single-lap tiles to be nailed or clipped even where mortar is used. That follows from the design: with a single lap, the wind has fewer layers to push against.
To recognise the type, look at a tile at the verge or the cut edge of a hip. A rib and channel along the side mean it interlocks. Profiles have names, and Double Roman is one of those HomeBuilding lists with a lifespan. Our short answer on what Double Roman tiles are explains how to tell them apart.
Pitch limits and the profile names on the data sheet
An interlocking tile sheds water over a single lap, so each profile has a minimum pitch that the maker publishes. Marley lists the minimums for its own concrete tiles, and they run from the shallow to the steep.
| Marley concrete tile | Minimum pitch |
|---|---|
| Mendip 12.5 | 12.5 degrees |
| Wessex | 15 degrees |
| Edgemere | 17.5 degrees |
| Double Roman (smooth) | 22.5 degrees |
| Anglia (smooth) | 25 degrees |
Marley's plain concrete tile is a different shape and needs 35 degrees. The table shows that one number does not fit every concrete tile, and the published sheet for the exact tile is the document to use. Our short answer on what pitch concrete tiles need explains how to read it.
Pitch is measured in degrees along the slope. A phone held against a rafter in the loft gives a rough figure, and the survey records it properly.
These are Marley's figures for Marley's products. A roof laid with another maker's tile has that maker's limits, and a roof whose maker cannot be traced needs the pitch and the tile surveyed together. The minimum applies to the roof as it stands, so a roof that has sagged or been re-set can fall below it, and the surveyor measures the pitch on the day. Where the pitch falls below what the tile allows, sealing and re-pointing cannot make the roof right, and the answer lies in the covering itself.
How the tiles are fixed, and why that matters
Each tile hangs on a batten by its nib and is held down by a nail or a clip. The fixing is what stops the wind lifting it. In the 2015 amendments to BS 5534, Marley says, higher wind loads were assumed, requiring more fixings generally, and tiles at the perimeter of a roof had to be fixed twice. The amendments also improved the way the wind uplift resistance of tile clips is read from test results.
The ridge, hip and verge are where the roof meets the wind, and they carry their own rules:
- Ridge and hip tiles must be mechanically fixed, with or without mortar
- Mortar remains in use, but cannot be the sole means of securing the covering
- Dry-fix systems at ridges, hips and verges come under BS 8612
- Tiles along the edges of the roof are fixed twice
BS 5534:2014+A2:2018 is the current edition. Marley says "Installing to BS 5534 isn't required by law", though a specification can make it a contract term, and Marley adds that following its guidance aids compliance with the Building Regulations.
Underlay belongs in this picture too. Marley describes the two families: HR stands for high resistance, an underlay that stops vapour passing and so needs eaves ventilation, while LR underlay is the breather type. The choice is made together with the tile and the ventilation, not afterwards.
On a roof with old mortar-only ridge tiles, this is the point to look at. A repair that re-beds the ridge in mortar and adds mechanical fixing follows the current standard. A repair in mortar alone does not.
How concrete interlocking tiles fail
These roofs show trouble at the fixings, the edges and the surface before they show it anywhere else. Watching for the early signs saves a bigger job.
- Cracked tiles, from a foot on the roof, a falling branch or an impact; a crack in a single-lap tile opens a path straight to the underlay
- Slipped tiles, where a nail has corroded or a clip has opened and the tile has crept down its batten
- Lifted tiles along the verge and eaves, where wind has worked at under-fixed edges
- Ridge or verge mortar that has cracked or dropped, leaving the cap loose
- Heavy moss in the side-lock channels, which holds moisture against the tile and the joint
- Underlay and battens that have aged beneath a sound-looking surface
Stay off the roof. A foot on a concrete tile can crack it, and the crack may not show until the weather finds it. Marley does not recommend jet washing with high power on tiles, so moss is better dealt with by a gentle brush or a treatment from a safe position. A tile that is damaged cannot be restored, only replaced.
None of these signs tells you the roof is finished. A survey separates a roof needing a few repairs from one needing a re-cover, and the photographs show you the difference on your own slopes.
For the underlay and battens beneath, the loft signs for those layers are set out in the companion guide on battens.
How long they last, and what the cost guides say
Sources disagree on concrete tile life, so both figures are worth knowing. For Marley, roof tiles are good for around 60 years of service in normal conditions when correctly installed, and the company says plainly that this is no promise of longevity. HomeBuilding (30 September 2025) gives 40 to 50 years for plain concrete tiles and for Double Roman. The BRE's 60-year minimum is a clay figure.
The two figures come from different sources, so quote both and treat each as a range. Neither can say how your roof will age, which depends on exposure, upkeep, the fixings and the underlay.
Price guides from third parties give a sense of scale:
- Checkatrade (June 2026, ex VAT, up to 3 m²): concrete tile repairs at £90 to £120 per m²
- Which? (November 2025 survey, ex VAT): £75 to £400 where up to six standard tiles need replacing, and £80 to £300 for a new ridge tile
- HomeBuilding (30 September 2025): £10,000 to £15,000 for a 65 m² semi in plain concrete tiles
None is a Hereford price or a quote for your roof. What drives the price of a real job is the roof area, its pitch and access, the availability of a matching tile and how sound the battens and underlay prove. Scaffold is included in our written quote, and check whether each quote you compare has VAT and scaffold included. Once the survey is done, one written total arrives with the photographs of what was found.
Our short answer on how long concrete tiles last sets the two lifespans side by side.
Repair or re-cover, and which country's rules apply
A repair makes sense when the tiles are sound and the failures are local: a few cracked tiles, a tired ridge, a corroded clip. A re-cover makes sense when the surface is failing across a slope, or when the timber and underlay beneath have gone. We say which it is, and we recommend replacement only when repair would not last.
When the covering is changed, the approval test depends on the country.
- In England, the Planning Portal sets a two-part test: you do not normally need an application only if both "Less than 25 per cent of the total 'building envelope'" and "Less than 50 per cent of the roof is affected" are met.
- In England, a new covering that adds weight "by 15 per cent or more" needs approval, and AD A describes a loading increase of "more than 15%" as significant.
- In Wales, the Welsh Government says of re-roofing: "In most situations, this work will need Building Regulations approval."
- In Wales, replacing the covering with a different material from the original means approval "is likely to be needed" for structural, fire and energy requirements.
Swapping concrete for slate, or the reverse, changes the weight, so the weight check is the first to run. Whichever side you are on, building control gives the answer: the council's service or a registered building control approver.
Matching matters too. Mixing a new profile into an old slope shows from the lane, and a new tile of the same profile can still differ in colour from one weathered for years.
