01432 610152 Get a quote Call 01432 610152

Code 4 lead colour

What colour marks code 4 lead?

In the Royston Lead table Code 4 is blue, and each of the six codes from 3 to 8 has a colour of its own listed beside it.

In brief

Blue. Royston Lead lists Code 4 as blue, 1.80 mm thick and 20.41 kg/m2. Its table puts Code 4 against dormers, valley linings, flashings and soakers, so blue lead is a grade that fits the small joints around a chimney and a wall. The other codes carry other colours: green for Code 3, red for Code 5, black for Code 6, white for Code 7 and orange for Code 8.

What the table says about Code 4

Each grade of roofing lead goes by a code number, and the code stands for thickness and weight. Royston Lead's cast-lead brochure sets the codes out in one table, with a colour printed beside each. Here is the Code 4 line, taken on its own.

Code 4 lead in the Royston Lead table
PropertyCode 4
ColourBlue
Thickness1.80 mm
Weight20.41 kg/m2
Listed usesSoakers, flashings, valley linings, dormers

That makes it the second thinnest of the six. Only Code 3, in green, is lighter, and the brochure marks Code 3 "Recommended for lead soakers only". From Code 4 upwards a code can serve more than one job, but the jobs listed for each one change as the code rises. Code 4 sits at the point where soakers and flashings are both still on the list, which is why a blue roll suits the leadwork around a chimney. The weight is given per square metre of sheet, so a long run of flashing weighs more in total than a short one of the same code.

Code 5, in red, is the next step up the table, with more thickness and a different list of uses.

All six colours in order

The six colours run in the order below, with each code's thickness beside it. Set Code 4 against the others and its position in the range is clear: one step up from the thinnest and two steps below the middle of the table.

Colour and thickness for lead codes 3 to 8
CodeColourThickness
3Green1.32 mm
4Blue1.80 mm
5Red2.24 mm
6Black2.65 mm
7White3.15 mm
8Orange3.55 mm

Each step up adds between 0.40 and 0.50 mm. The colours are the ones Royston Lead prints in its brochure, and another maker may present its sheet differently. When you hold a quote, ask for the code in figures and not only the colour. A word such as standard or heavy leaves you guessing, where a number can be checked against the table.

Heavier codes also weigh more per square metre, which matters on an old timber roof that has to carry them. It is a fair question to put at a survey, and one we answer from what we find in the roof structure and not from the table alone. The page on how heavy roofing lead is gives the weights.

What blue Code 4 is listed to do

Royston Lead gives each code a set of use letters, and the letters stand for places on a house: soakers, flashings, pitched valleys, the larger parapet and box gutters, and dormers. Code 4 carries the letters for soakers, flashings, pitched valleys and dormers. It does not carry the letter for parapet and box gutters, so the brochure does not list blue lead for those, and that kind of gutter starts at Code 5.

On a house that means Code 4 appears in the brochure for:

  • the folded pieces tucked under slates or tiles beside a wall
  • chimney and wall flashings
  • the lead lining of a pitched valley
  • the cheeks and tops of a dormer

Which code your own roof gets depends on the joint and its length, so the table does not choose for us. The page on what lead code is used for flashings and the page on what lead code is used for soakers take the two main uses in turn. The lead roofing hub shows where each joint sits on the house.

Checking the code on a quote and on the roof

A colour is a quick way to tell one roll from another, but a quote should still name the code. When you are comparing leadwork proposals, look for these points:

  • the code written as a number, joint by joint
  • whether the same code is proposed for a flashing and for a valley, or a different one for each
  • a photograph of the lead on your own roof before work starts
  • one written total, with VAT and scaffold either in or clearly out

The colour tells you about new sheet. For lead already fixed on a roof, thickness is the clue, and a cut edge shows it. We photograph what we find, so the condition of the old lead is on screen and not a matter of guesswork.

The codes do not change at the Welsh border. In England, Approved Document C cites BS 6915 for lead, and BS 6229:2025 covers flat roof membranes, never lead. The lead on a house in Herefordshire and one in Monmouthshire comes from the same table. Building Regulations matter for re-roofing and insulation, not for the colour of the roll.

Related questions

Is blue lead thicker or thinner than red?

Thinner. In the Royston Lead table, blue Code 4 is 1.80 mm thick and weighs 20.41 kg/m2, while red Code 5 is 2.24 mm and 25.40 kg/m2. The next code up is therefore the heavier of the two sheets, and its listed uses include parapet and box gutters.

Can I tell a roof's lead code from its colour?

Not once it is fixed. The colour belongs to new sheet in the brochure. On an existing roof we look at thickness at a cut edge, and we photograph it for you. That tells us what the old flashing is, and the new code is chosen for the joint.

Get your free roof quote

Tell us about the roof and we will arrange a survey.

10-year workmanship guarantee, in writing