Callout 1 of 3
A roof window and the rules around it
The first callout is the roof window, an opening set into the slope. In Newland it raises three questions at once: whether it needs planning permission, what energy standard the glazing must reach, and how the lead around the frame is formed. The first question belongs in our roof window planning guide, which explains how England's permitted development rules treat a roof window and a dormer in a conservation area. Malvern Hills District Council lists Newland as a conservation area, and the council lists no Article 4(2) Directions as being in force.
On energy, Table 4.2 of AD L 2021 asks a window, roof windows included, to reach 1.4 or WER Band B. Rooflights are a separate, fixed-in-place type of opening, with a figure of 2.2. The same table gives 0.15 for a new roof. AD L 2026 Table 3.2 repeats those values from 24 March 2027, so a window ordered now meets both editions. Where an existing roof is renovated, Table 4.3 sets 0.35 as the threshold and 0.16 as the improved value.
Lead does the sealing round the frame: a strip dressed against the glazing bar and tucked into the slope, with soakers folded in under the courses alongside it. A soaker is a small bent piece of lead that keeps the joint between frame and covering dry. Royston Lead's table shows Code 4 as suitable for soakers and flashings, and Code 3 as "Recommended for lead soakers only". We identify which code is in place before we judge whether it can stay, because a flashing cut from the wrong gauge fails early.
Condensation is the other thing to plan for, because a glazed opening is a cold surface in a room under the slope. We ask what is below the window, whether that is a bedroom or a loft room, so the position suits how the space will be used. Listing changes the first step. On a listed building, a new opening in the slope alters the roof's character, and that needs listed building consent from the council before anything is ordered. Fitting a new roof window, or replacing an old one, is covered on our skylights page, and the survey photographs the slope you have in mind so the opening can be placed against the rafters and clear of any chimney run. Cutting a window opening through the rafters means the cut timbers must be carried by new trimmers, the short cross-pieces framing the hole, and that structural detail is shown in the survey notes before an order is placed.
Figures for a Newland roof window
- Roof window
- 1.4 or WER Band B, Table 4.2
- Rooflight
- 2.2, a separate figure
- New roof
- 0.15, Table 4.2
- Renovated roof
- 0.35 threshold, 0.16 improved, Table 4.3
A roof window brings a planning question, an energy figure and a lead detail in one opening.















