Callout 1 of 3
The verge where a Leigh gable meets the sky
A Leigh survey opens at the gable ends, because the verge, the sloping edge where the roof stops above a gable wall, is exposed on its top face and along its underside at once. In a bedded verge the last tiles or slates sit on an undercloak, a bedding layer of slate or tile beneath the edge, and mortar closes the gap between the two. A dry verge swaps that mortar for plastic or metal units held by screws, and BS 8612 is the specification written for dry-fix ridge and verge units.
Marley, the tile maker, writes that "Installing to BS 5534 isn't required by law", but adds that after the 2015 amendments "mortar could no longer be relied upon as the only means of securing the roof covering". A bedded verge on a Leigh house is therefore not condemned. It wants a mechanical fixing behind the mortar, and an older building may keep its mortar line for the look of the thing. From the ground we look for a verge line that waves instead of running straight, and for pale crumbs of mortar on the path below. From the loft, daylight along the gable wall tells us the undercloak has opened.
Tiles at the edge of a roof carry more load from the wind than tiles in the middle of a slope, so a loose one at the verge deserves a ladder visit soon after it is spotted. We lift the edge tiles, check the battens that the tile nibs hook over, and photograph every stage so the pictures reach you with the report. Lost verge mortar is a repair, and the written price covers that repair alone.
Even where a whole slope proves worn, the Planning Portal's England test keeps the question small: no application is normally needed when "Less than 25 per cent of the total 'building envelope'" is affected and "Less than 50 per cent of the roof is affected." A bigger job goes to building control.
On a gable that is also a party boundary or sits close to a neighbour's, access matters too. We check how a ladder or a scaffold tower will stand before we quote, because a verge cannot be rebedded from the ground, and the report records the access it needs. Our roof repairs page covers the smaller work on a gable edge.
Checked along a Leigh gable verge
- A verge line that runs true
- Mortar that is sound, not crumbling
- Edge tiles that sit tight
- Battens beneath the last course
- Daylight along the gable wall inside
Lost verge mortar is a job for a trowel and a ladder, not a new roof.















