Callout 1 of 3
Verges and gable ends round the church and farm
A verge is the exposed edge of a roof above a gable wall, and it faces the wind with nothing to shelter it. Mitchel Troy has a church and a farm group to measure against. The Cadw listing for St Michael's church (Grade II*) records "green slate roofs", and Church Farmhouse and the barn to its west are both listed Grade II. On roofs like these, the verge is where an owner first sees trouble: a stripe of daylight along the wall head, pointing that has dropped into the border below, or a slate corner that lifts in a gust.
We work along each verge from the eaves to the ridge. Loose pointing is raked out and renewed, undercloak slates (the narrow course tucked beneath the edge slates) are checked for cracks, and the edge slates themselves are tested for movement. Dry-fix verge systems come under BS 8612. On an older gable we weigh a bedded edge against a clipped unit by asking how the house was built, because a dry system can look foreign on a historic wall. Wherever a mortar bed is kept, a mechanical fixing goes behind it. A photograph is taken before the old verge comes off and again once the new one is dressed, so you can compare them. If a slate along the edge has cracked across its width, it is replaced, not glued, and the replacement is chosen by tone against its neighbours before it goes up.
Green slate comes in shades, and matching is a matter of laying samples side by side on the roof. HomeBuilding gives Welsh slate "100+ years" and Spanish "75-100 years", so sound slates are worth saving. A change to a different material is another matter: the Welsh Government says approval under the Building Regulations is likely, because loading, fire performance and energy use all change. Welsh permitted development covers a new covering that matches the old in look so far as practicable, and on the listed church or farm group, work that would alter their character needs listed building consent as well. Our slate roofing page covers repair methods, and you are told early if the survey points to a strip and relay of one slope. Because a gable can be reached only by ladder or tower, we agree the access with you first and keep the garden clear of loose material as we work.
The parts of a gable verge
- Edge slates
- The outer slates, pinned where the roof ends
- Undercloak
- A narrow course tucked beneath the edge slates
- Pointing
- Mortar bed that seals the edge against the wall
- Fixings
- Nails or clips holding the edge against wind
- Dry-fix unit
- A clipped verge system under BS 8612
A good verge repair is the one nobody notices from the lane.















