01432 610152 Get a quote Call 01432 610152

Roofers in Broadwas

Broadwas roofs, from a Grade II* farmhouse and hop kiln to the village church.

We check the lead and the slope first, send photographs of what we find and put a single written total on the job.

Get a free quoteCall 01432 610152

Broadwas roofs where buildings join

  • Older cottages with weathered clay tile roofs and brick chimneys behind a flint wall
    Farmhouse and hop kilnWhere a farmhouse and its kiln meet, the roof joint takes the weather.
  • Slate roofs and chimney stacks along a red brick Victorian terrace
    Grade II* farmhousesStone Farmhouse and Butts Farmhouse are Grade II*, so consent comes before any re-cover.
  • Newer homes with grey concrete tile roofs along a curving estate road
    St Mary Magdalene's roofChurch roofs follow a consent route set by denomination and use.

The lie of Broadwas

Broadwas on a street map, with a dashed circle around the town and the nearest towns we cover. Tiles © Esri; map data © Esri, HERE, Garmin, OpenStreetMap contributors.

Broadwas roofs, from joint lead to church wall

Lead joint, farmhouse slope and church wall: three callouts on a Broadwas roof

The survey climbs in a set order: first the lead where the kiln meets the farmhouse, then the slope of the listed farm roofs, and last the church wall, with the consents and licences that govern any Broadwas job.

A drawn cut-away section through a Herefordshire border house: the front of the main roof is cut open to show the rafters, underlay, battens and slates, beside a black-and-white timber-framed gable. Numbered, from the ridge down: 1 Joint lead; 2 Farm slopes; 3 Church wall.

Fig. 1 Joint lead, farm slope and church wall, drawn in section and numbered.

Callout 1 of 3

Lead at the joint where kiln meets farmhouse

Our first stop in Broadwas is the lead. Stone Farmhouse and Attached Hop Kiln is listed Grade II* (list entry 1082977, first listed 12 November 1951), and the entry names the two buildings together. Wherever the roof of one building runs up against the wall of another, the junction is closed with lead. A flashing is lead let into a joint in the masonry and dressed down over the covering. Soakers, small folded pieces of lead, sit under the courses beside it, while a back gutter, a shaped lead tray, steers water round anything standing up through the roof.

Lead comes in codes, and the code decides the use. Royston Lead's table lists Code 3 as "Recommended for lead soakers only", puts Codes 4, 5 and 6 on flashings and offers Codes 4 to 8 for a pitched valley gutter. We identify the code of what is already there before we say what a repair needs, and the new lead is dressed so that it can move a little with the structures either side of it.

Where one roof meets another building's wall, the lead decides how the joint ages.

MyJobQuote writes that a correctly installed lead flashing "can last for over 80 years". The hedge matters: it describes a good installation and promises nothing about yours. Lead that has lifted at its edge, split along a fold or been smeared over with sealant tells a different story, so we photograph the edge of each flashing and the mortar joint it sits in. A sound strip with a failed joint above it lets water in just the same.

From the roof space, the junction's underside shows staining on the timber or daylight at the wall. That view explains a patch on a bedroom ceiling better than anything seen from the ladder, and the photographs go into your report. Our lead roofing page sets out flashings, valleys and soakers in more depth.

Lead at a Broadwas junction

Flashing
A lead strip set into the wall joint, dressed over the covering
Soaker
A folded piece slipped under each course beside the wall
Back gutter
A lead tray that steers water round a projection
Mortar joint
Where the flashing is wedged and pointed
Dressing
Shaped so the lead can move with the structure
Fig. 2 Leadwork, drawn close

Callout 2 of 3

Re-covering a listed farmhouse roof

The second callout is the slope. Stone Farmhouse, with its kiln, is listed Grade II*, and so is Butts Farmhouse (list entry 1349343, first listed 12 November 1951). Ivy House Farm is Grade II (list entry 1302181). The roof is part of what is listed, so the covering is a council question before it is a merchant's, and Malvern Hills District Council is the body to ask.

We start by establishing what is on the slope. Clay tile, natural slate and concrete tile age differently, and the published ranges differ from one source to the next. The BRE's minimum life for clay roof tiles is 60 years. For slate, HomeBuilding gives Welsh slate "100+ years", Spanish slate "75-100 years" and reclaimed Welsh slate "50-80 years", while SPAB says the life of a well-slated roof is "likely to be more than 100 years". None of those is a promise about your roof, and a covering that is still sound can be kept, stripped and refixed.

Should a re-cover go ahead, England's rules apply. According to the Planning Portal, two limits decide whether an application is normally needed: less than 25 per cent of the building envelope, and less than 50 per cent of the roof. Re-covering an existing roof while adding or upgrading insulation counts as renovation under Part L: AD L 2021 Table 4.3 gives a threshold of 0.35 and an improved figure of 0.16. The 0.15 in Table 4.2 is for a new roof element, not a re-covered one, and the 2026 edition takes over on 24 March 2027.

Under the covering, the battens and underlay tell the rest of the story. Where the house allows it, we lift a few tiles or slates along an eave and a verge to see the timber beneath, and we photograph what is there. Softened battens, nails rusted through and an underlay that has split or sagged are the signs of a covering that has outlived its fixings, whatever the surface looks like from the ground. The survey records all of it, so that the decision between repair and re-cover rests on evidence.

On a house of this standing, the full strip is the last resort and never the first suggestion. Our roof replacement page explains what a re-cover involves, from the first lifted course to the final ridge, and why we price it as one written total after the survey.

Before a listed farmhouse roof is touched

Can a listed Broadwas farmhouse keep its old covering?

Yes, where it is still sound. Slates or tiles can be stripped, sorted and fixed back, and the council decides whether any change of covering is acceptable on a listed house. We report what is there before anything is lifted.

A listed roof is a council question first and a merchant's question second.

Fig. 3 The slopes, drawn close

Callout 3 of 3

Church roof consents and the rules around them

The third callout is the wall, and in Broadwas it belongs to the church. Broadwas sits to the north-east of central Hereford, 21.8 road miles away. St Mary Magdalene has a Grade II* list entry (1349345, first listed 29 July 1959), and the parish had 387 usual residents at the 2021 Census, according to the ONS. A church roof follows different consent rules from a house roof. St Mary Magdalene, in the Diocese of Worcester, appears in the service calendar kept for the Lower Teme Valley churches, so while worship continues its roof work goes through the faculty system and not through listed building consent. Were the church ever to close, the exemption would end and the council's consent would be needed. Whoever looks after the building should put the list entry number to its governing body before work is planned.

To find out whether your Broadwas address sits in a conservation area, use the register Malvern Hills District Council publishes. On Article 4, the council reports that no 4(2) Directions are currently in force for its district. Anyone weighing a dormer or a roof window should start with our planning guide for roof windows.

South Worcestershire Building Control, run jointly by Malvern Hills District Council, Worcester City Council and Wychavon District Council, handles building control for Broadwas. A registered building control approver is the private route. Section 169 of the Highways Act 1980 makes a licence a condition of scaffolding that obstructs the highway. Worcestershire County Council issues it, and for a householder job it is the firm that has been hired to carry out the work that is "required to apply". The scaffold forms part of the one written price.

On any church roof we start with the lead and the gutters, because an outlet that spills against a wall shows as staining on the masonry below. If the building in front of you is a protected one, the listed and heritage roofing hub describes how a survey of a protected roof is carried out.

Words you will meet in Broadwas

Flashing
A lead strip that seals a roof against a wall or projection
Soaker
A small folded lead piece under each course beside a wall
Back gutter
A lead tray behind a projection that carries water round it
Faculty
The Church of England's permission system for work on its churches
Hop kiln
A farm building in which harvested hops were dried

Broadwas roofs: lead joints, listed farms and the church

How is the roof joint between a Broadwas farmhouse and an attached kiln looked after?

A lead flashing closes it, set into the wall and dressed over the covering, with soakers under the courses beside it. We lift nothing at first. We photograph the lead's edge and the mortar joint above it, then check the loft for staining on the timber below. Royston Lead's table limits Code 3 to soakers, so the code of the existing lead is established before a repair is put forward.

Can a Grade II* farmhouse near Broadwas change its roof covering?

Only if Malvern Hills District Council agrees. The listing covers the building and its roof, and under section 7 of the Planning (Listed Buildings and Conservation Areas) Act 1990 works that affect its character need consent. Stone Farmhouse (list entry 1082977) and Butts Farmhouse (1349343) are both Grade II*. Sound slates or tiles can be stripped and refixed, which keeps the question of a new material from arising.

Does a new roof on a Broadwas house need Building Regulations approval?

In England the Planning Portal sets two limits for a re-roof: less than 25 per cent of the building envelope and less than 50 per cent of the roof. Beyond them the job goes to South Worcestershire Building Control or a registered building control approver. Insulating the roof during the re-cover makes it a renovation under Part L, where AD L 2021 Table 4.3 sets 0.35 as the threshold and 0.16 as the improved value.

What consent route covers the roof of Broadwas church?

The church holds list entry 1349345, Grade II*. Worship goes on there under the Diocese of Worcester, which places roof work within the faculty system for as long as that lasts. If it closed, listed building consent from the council would take over. The church's governing body is the first call, with the list entry number and photographs of the roof to hand.

Does a Broadwas roof job mean applying for a scaffold licence?

Only where scaffolding obstructs the highway, since section 169 of the Highways Act 1980 attaches the licence to that. Worcestershire County Council's page makes the firm contracted for the work the applicant, "required to apply", and charges £85 per week, then £65 for subsequent weeks. A house set back from the lane may need none. The scaffold, licence and all, sits inside the one written price.

Do I have to tell next door before flashing into a shared wall?

Where the wall is a party wall, the building owner serves the notice, not us. Under the Party Wall etc. Act 1996, section 3(2)(a), a party structure notice must be served on the neighbour at least two months in advance of the first day on site, and cutting into the wall to insert a flashing is one of the rights listed in section 2(2)(j). A surveyor enters the picture only on dissent, which the Act deems to follow 14 days of silence.

Request a lead-first survey in Broadwas

Name the building the roof belongs to, attach a picture if one is handy, and we will agree a day to come out.

10-year workmanship guarantee, in writing