Callout 1 of 3
The ridge on a black-and-white house
Our survey begins on the ridge, the line of capping along the top of the roof. The Herefordshire Building Stone Atlas names Almeley among the "Black and White Villages", alongside Eardisland, Pembridge, Dilwyn, Yarpole and Weobley. The Royal Commission's 1934 inventory describes Almeley's monuments numbered 7 to 46, unless it says otherwise, as 17th-century, two-storeyed, timber-framed buildings "with tiled or slate-covered roofs". The ridge may therefore sit over tile or over slate, and the repair has to suit whatever lies beneath it.
The atlas calls the timber-framed or "black-and-white" style the most striking regional architecture in this rural landscape, particularly in the north-western quarter of the county, where a tourist trail has been laid out. A repair that clashes with the house shows from the lane, which is why we match the covering and the ridge detail to the building and not to a catalogue.
A ridge is bedded in mortar, held by dry-fix clips and screws, or both. Marley says "Installing to BS 5534 isn't required by law", and adds that mortar could no longer be relied upon as the only means of securing the roof covering. BS 8612 is the specification for dry-fix. Mortar is not banned, so a bedded ridge stays bedded, but we add a mechanical fix and we read the bed before we judge the tiles. Press on each capping tile: one that moves under the hand has lost its bedding, and open joints let rain run into the top course.
On a timber-framed gable the end tile and the verge need room to move. The wall plate, the beam at the head of the wall, and the rafters shift with the frame, and a rigid mortar verge laid hard against a moving timber will crack. We photograph the gable end from the ladder or tower to show any gap along the post, and a flexible, fixed detail replaces mortar that has failed. Where a hip rafter meets the ridge, three lines of capping end at a single point, so that junction gets its own photograph, taken from above where it can be reached safely. Our pitched roofing page describes coverings, ridges and fixings in more depth.
Ridge fixings on an Almeley roof
- Bedded capping
- Mortar bed plus a mechanical fix
- Dry-fix ridge
- Clips and screws, as BS 8612 covers
- End tile at the gable
- Checked for movement against the frame
- Hip junction
- Mortar and fixings checked where two lines meet
A ridge tile that rocks has lost its bed, and a photograph shows you exactly where.















