01432 610152 Get a quote Call 01432 610152

Roofers in Gladestry

Roof repairs and re-roofs for Gladestry's church spire, stone-tiled buildings and village houses.

Gladestry is a 39-minute drive north-west of central Hereford, 25.1 road miles. Each survey ends in one written total.

Get a free quoteCall 01432 610152

Gladestry's spire, stone tiles and listed barns

  • Older cottages with weathered clay tile roofs and brick chimneys behind a flint wall
    One church, three coveringsCadw's record for St Mary's lists stone tiles, slate and a shingled spire top.
  • Slate roofs and chimney stacks along a red brick Victorian terrace
    The White Hart's stone tilesCadw's listing for this Grade II building records stone tile roofs.
  • Newer homes with grey concrete tile roofs along a curving estate road
    Old barns and a former smithyThe Old Tithe Barn and the former Smithy Range are both Grade II.

Gladestry on our coverage map

Gladestry on a street map, with a dashed circle around the town and the nearest towns we cover. Tiles © Esri; map data © Esri, HERE, Garmin, OpenStreetMap contributors.

Gladestry's roofs, from spire to smithy

Spire, stone tiles and old outbuildings: three callouts on a Gladestry roofscape

The first callout climbs to the spire of St Mary's, the second takes in the stone-tiled and listed buildings around the village centre, and the third looks at barns, ranges and the wildlife that shelters in them.

A drawn cut-away section through a Herefordshire border house: the front of the main roof is cut open to show the rafters, underlay, battens and slates, beside a black-and-white timber-framed gable. Numbered, from the ridge down: 1 Spire and nave; 2 Listed village; 3 Barns and eaves.

Fig. 1 Gladestry roofline in section: spire, stone-tiled slope and outbuilding, numbered.

Callout 1 of 3

Stone, slate and a shingled spire on one roof

Cadw's record for St Mary's, the parish church, listed Grade I (record 8774, designated 21 September 1962), is exact about its coverings: "Coursed random rubble, (various building phases visible) stone tiled roof, slate to base of spire, shingled upper, 1709 weathervane". Three roofing materials sit on one building, each laid and fixed in its own way, so a survey treats them as three separate jobs that share a skyline.

Stone tiles cover the main roof. Slate forms the base of the spire. Cupa, a slate supplier, says BS 5534:2014+A2:2018 "also indicates that the minimum roof pitch for natural slate is 20 degrees in the case of a project situated in an area with moderate exposure and with a slate 500mm long and a 115mm overlap", and bars slate hooks below 25º. A spire is steep, well above both figures, so the question there is fixing: every slate is held by nails or clips, and a spire gives the weather a free run at any that have worked loose.

The upper spire is shingled, a covering of thin timber pieces laid in overlapping rows. Its joints, its fixings and the timber itself are all read from as close as safe access allows. A first look at a spire is taken from the ground with a long lens, and anything closer is planned as work at height, with a scaffold or an access platform arranged before the job starts. For slate, HomeBuilding lists Welsh slate at "100+ years" and reclaimed Welsh slate at "50-80 years", so slate at the foot of a spire is worth saving where it is sound, and the question becomes whether the fixings have lasted as well as the slate. The weathervane, dated 1709 in the listing, is part of the check too, because a loose vane puts a load on whatever it stands on. Lead does the work where a roof meets a tower or a wall, and the listing does not describe it, so we look for it on the day instead of assuming it.

Where one covering gives way to the next, the join is the place to look. Our slate roofing page explains how slates are held, and how the survey tells a slipped slate from a failed fixing.

The coverings in Cadw's record for St Mary's

Main roof
Stone tiled
Base of the spire
Slate
Upper spire
Shingled
Weathervane
Dated 1709 in the listing

St Mary's is read in layers: stone tiles on the main roof, slate at the spire's base, a shingled cap above.

Fig. 2 The ridge, drawn close

Callout 2 of 3

Listed roofs, the church and the consent question

Gladestry has more than a church to consider. Cadw's description of The White Hart, listed Grade II (record 15335, designated 31 January 1995), records "Stone tile roofs". The detached former Smithy Range near the White Hart is Grade II as well (record 15336, designated 31 January 1995), and so is the Old Tithe Barn belonging to Gladestry Court (record 15334). Each has a roof that a listing protects as part of the building.

Since 4 November 2024 the Historic Environment (Wales) Act 2023 has governed work on them. Section 88 stops works that would affect a listed building's character unless section 89 authorises them through listed building consent. Stone tile has its own record to respect: SPAB's guidance for this region calls Welsh slate and stone roofs "predominantly double-lapped", so a repair means lifting a section, sorting the slabs and relaying them in their rows. A listed house keeps its permitted development rights for the roof, and consent is needed as well. Before we write a price we ask whether the planned repair is like-for-like or something larger, and the answer decides whether the council is approached first.

For the church, much turns on the owner and the use. Roman Catholic, Methodist and Church in Wales buildings, certain Baptist Union buildings and Church of England faculty buildings are on the Welsh exempt list, in each case while used primarily as a place of worship, and the list omits the United Reformed Church. Before any work at St Mary's, the first call goes to the church's governing body, and no scaffold is started until that is settled.

Powys County Council keeps the authoritative list of conservation areas, so check your Gladestry address against it and ask whether an Article 4 direction applies. New roof windows and dormers meet Welsh limits that our planning guide for roof windows sets out. On a protected roof, our listed and heritage roofing page describes the sequence from photographs to finished lead.

Asked before work on a listed Gladestry roof

  • Is the repair like-for-like?
  • Does the listing name the roof covering?
  • Does the work need listed building consent?
  • Is an Article 4 direction in force?
  • Who owns and uses the building?

A listed roof is a record of the building, and a repair should read as part of it.

Fig. 3 Wall abutments, drawn close

Callout 3 of 3

Barns, the smithy and what shelters under their eaves

Outbuildings such as a tithe barn or a former smithy have roofs with long, simple slopes, and the faults on them are plain ones: slipped courses, open verges, rusted fixings and gutters that have dropped. We read them from the ground, from the slope where it is safe and from inside, and what the roof void holds matters as much as what the roof shows. Daylight at a rafter, a damp patch on a wall plate and droppings on a floor all go into the report with a photograph and a position.

Wildlife law belongs in that report. Under section 9(4) of the Wildlife and Countryside Act 1981, intentionally or recklessly disturbing a bat in a place it uses for shelter, or blocking its way in, is an offence. Regulation 43 of the 2017 Habitats Regulations reaches further, because harm to a roost or breeding site needs no intent to be an offence. In Wales, Natural Resources Wales says you must apply to it for a licence if any work will affect a protected species.

Birds are covered separately. Section 1 of the 1981 Act protects a nest under construction or occupied by a bird: intentionally taking, damaging or destroying it is an offence. A barn or range that holds a roost or a nest holds up the job. We photograph what is there and talk to you before any strip begins, because a roof job that disturbs a roost can end in an offence for the owner as well as the roofer.

The gutter on a long, low roof must keep its fall. Brett Martin gives "1mm for every 600mm", and a run that sags keeps water on the wall face. The rafters, the purlins (the horizontal beams that carry the rafters) and the wall plates are tapped and probed as well, since the timber under a covering decides how long the covering stays up. Each barn gets its own set of photographs, including the inside face of the roof, so the report can be read on its own. Our roof inspections page describes what a survey of an outbuilding records and what the photographs show.

What the roof void holds matters as much as what the roof shows.

A barn verge, edge on

SoundVerge mortar tight, tiles bedded, no gap at the gable
Needs workMortar lost, tiles lifting at the edge, gable stained below

Gladestry roofs: a spire, listed barns and consents

How is a roof with three coverings, like St Mary's at Gladestry, surveyed?

Each covering is read on its own terms. The stone tiles are checked row by row for slipped and split units, the slate at the foot of the spire for loose nails and clips, and the shingled top for open joints and decay in the timber. A first look is made from the ground with a long lens, and anything closer is planned as work at height. The report puts a photograph beside each finding.

Does a roof repair on a listed Gladestry building need consent?

It can. Section 88 of the Historic Environment (Wales) Act 2023 bars works that would affect a listed building's character unless authorised, and section 89 sets up listed building consent. Cadw's records list The White Hart, the former Smithy Range and the Old Tithe Barn at Grade II. Whether a repair is like-for-like decides how large the question is, and the council is the place to confirm that before an order is placed.

Which route do roof repairs on St Mary's Church at Gladestry follow?

St Mary's is listed Grade I (Cadw record 8774). Listed building consent applies unless the building is on the Welsh exempt list, which takes in Roman Catholic, Methodist and Church in Wales buildings, along with named Baptist Union buildings and Church of England faculty buildings, while used primarily as a place of worship. The United Reformed Church is absent from it, and a minister's house is outside the exemption. The governing body of the church should hear first, before work starts.

Do I need approval to re-slate a house in Gladestry?

The Welsh Government's re-roofing page says that "In most situations, this work will need Building Regulations approval." Its roof page says that repairing or re-covering "less than 25 per cent of the area of a pitch or flat roof" does not normally need an application, while replacing or repairing "more than 25 per cent of the roof area" normally means improving the insulation. We confirm which applies with the council's building control service or a registered building control approver.

What does a new roof cost, going by published guides, for a Gladestry house?

Which?, in its November 2025 survey before VAT, gives £7,000 to £21,000 for the full roof replacement it prices on an average three-bedroom house. HomeBuilding's example, a 65 m² semi in plain concrete tiles, is £10,000 to £15,000, and it says the Welsh slate version of that roof "might reach £18,000". MyJobQuote says the average new roof costs around £5,250. They differ widely, so ours is a written total set after the survey.

Can scaffold go up on a Gladestry lane for a roof job?

A licence under section 169 of the Highways Act 1980 is required for scaffolding that obstructs a highway, and we arrange the licence with our scaffolder. The scaffold cost is included in the quote. Tell us at the survey where a vehicle can stand, and how wide the lane is at its narrowest, so the scaffold is laid out to leave the lane usable and the delivery lorry has somewhere to stop.

Ask for a Gladestry survey, spire to smithy

Describe the roof briefly and add a photo when you can. We survey first and put the price in writing afterwards.

10-year workmanship guarantee, in writing