01432 610152 Get a quote Call 01432 610152

Roofers in Old Radnor

Roof repairs and re-roofs for Old Radnor's inn, farmhouse ranges and village houses.

Old Radnor sits 23.4 road miles from central Hereford, north-west, about 38 minutes by road. A survey ends with one written total.

Get a free quoteCall 01432 610152

Old Radnor's inn, farmhouse and brick stacks

  • Older cottages with weathered clay tile roofs and brick chimneys behind a flint wall
    A stone-tiled inn roofCadw records The Harp Inn, Grade II, with a stone tile roof.
  • Slate roofs and chimney stacks along a red brick Victorian terrace
    Brick stacks above stoneIts listing names a ridge stack and an offset end stack, both modern brick.
  • Newer homes with grey concrete tile roofs along a curving estate road
    Listed farm rangesStockwell Farmhouse and its attached ranges are Grade II, so consent applies.

Getting to Old Radnor

Old Radnor on a street map, with a dashed circle around the town and the nearest towns we cover. Tiles © Esri; map data © Esri, HERE, Garmin, OpenStreetMap contributors.

Old Radnor roofs, from tile to range

Stone tiles, brick stacks and listed farm ranges around Old Radnor

Three callouts follow a survey of the village: the stone tile slopes first, followed by the brick stacks standing on them and, last, the eaves and attached ranges of a listed farmhouse.

A drawn cut-away section through a Herefordshire border house: the front of the main roof is cut open to show the rafters, underlay, battens and slates, beside a black-and-white timber-framed gable. Numbered, from the ridge down: 1 Stone tile slope; 2 Brick on stone; 3 Ranges and eaves.

Fig. 1 Old Radnor roof cut open: tile slope, brick stack and eaves, numbered.

Callout 1 of 3

Old Radnor's stone tiles, read row by row

Cadw's description of The Harp Inn, listed Grade II (record 9132, designated 15 February 1993), records a "Stone tile roof, ridge stack and offset end stack in modern brick". That one line gives an Old Radnor survey its starting point. Stone tiles are slabs of rock split thin and hung in overlapping rows down the slope. SPAB's note for this region says of Welsh slate and stone roofs that they "are predominantly double-lapped", so we read the laps one row at a time, working downhill from the ridge.

Out on the slope we hunt for slabs that have slid out of line, slabs split across their width and fixings that have let go. Where a slab has slipped, the gap opens straight onto the battens (the timber strips carrying each row) and onto the sheet of underlay under those. From the loft we press the battens for soft spots and search the underside for stains. We picture every fault for the report and mark where on the slope it lies, so you can follow us round the roof from the armchair. Stone is heavy, so the timbers that carry it matter as much as the covering: the report notes any rafter that has bowed and any batten that sags between supports.

Replacement needs thought. SPAB writes that "Unfortunately, many are changed to different stones or even to slates or fake stone slates." Where the original covering can be saved, it stays: sound slabs are stripped, sorted and relaid, and new stone is sourced only to fill the gaps. If a supplier claims matching stone is out of reach or far off, SPAB's advice applies: "Claims of unavailability or long delivery times should always be checked with the quarries." We make that call before we suggest any other material.

A repair on its own is the smaller job, and the quote for one is a single written total. Our roof repairs page explains how we deal with slipped and split units, and what a survey photographs first. A short note after the survey lists the slopes in the order we would tackle them, starting with the faults that let rain in.

Why row by row?

Why check the laps row by row on a stone-tiled slope?

SPAB calls Welsh slate and stone roofs predominantly double-lapped, so rainwater passes over overlapping rows on its way down. A slab out of place breaks that cover, and the gap shows only when each row is read in turn.

Stone laid in overlapping rows is read one row at a time.

Fig. 2 The slopes, drawn close

Callout 2 of 3

Brick stacks on a stone-tiled roof

Cadw's entry for the inn lists two stacks, a ridge stack and an offset end stack, both in modern brick. Brick standing on a stone-tiled roof joins two materials that weather at different rates, so the junction at the foot of each stack gets the longest look. Lead bridges it. A flashing, a strip let into a joint in the brickwork and lapped over the stone below, closes the line at the front and the sides. A soaker, a folded lead sheet slid under the rows beside the stack, closes the gap beneath. The back gutter is the lead channel on the uphill side.

Royston Lead's table links each gauge to a use: Code 3 is "Recommended for lead soakers only", and Codes 4, 5 and 6 are listed for flashings. A stack with soakers and flashings can therefore carry two gauges of lead. MyJobQuote says that lead flashing which is correctly installed "can last for over 80 years", so a sound run is left in place. Where lead has split or lifted, that length comes out in full and a new one goes in, with pictures of both.

Above the lead we look at the brick: faces that are cracked or spalled (flaked at the surface), joints where the mortar has eroded, and the flaunching, the mortar cap that holds the pots in place. A stack leaning out of true, or split open at the corners, needs rebuilding, and the photographs mark the courses at fault. We lift an edge of the lead to look behind it, because a flashing can look whole from outside while the joint it sits in has crumbled. The stack at the gable end and the stack on the ridge meet different weather and different junctions, so each gets its own set of photographs.

Cracked pots, or a cowl that has come loose, are noted at the same visit, and each is photographed where it stands before anything is lifted. Our chimney repairs page deals with rebuilds and repointing as separate jobs.

Checked where brick meets stone tile

  • Lead where the brick meets the stone
  • Soakers under the rows beside the stack
  • Brick faces for flaking or cracks
  • Mortar joints between the courses
  • Flaunching and pots at the top

Brick and stone age at different speeds, so their junction is checked first.

Fig. 3 Chimneys, drawn close

Callout 3 of 3

Listed farm ranges, their gutters and their eaves

Stockwell Farmhouse, with its attached ranges to the south, is listed Grade II (Cadw record 9133, designated 15 February 1993). A range is a row of outbuildings built on to or beside a farmhouse, and a listing that includes the ranges covers their roofs. Section 88 of the Historic Environment (Wales) Act 2023 requires authorisation for works that affect a listed building's character; section 89 provides for listed building consent. Those sections have applied since 4 November 2024, so we ask the council, before any tile is ordered, whether the planned repair needs consent.

Long, low ranges shed a great deal of run-off from their slopes, and the eaves and gutters carry all of it. Brett Martin gives the fall of a gutter as "1mm for every 600mm" toward its outlet, so we check that each run and its brackets hold that line. Where HR underlay sits in a cold roof, Marley asks for a ventilation gap at the eaves of 25mm for pitches of 15° or less, and 10mm above 15°. HR stands for high resistance, and Marley is clear that this underlay is not vapour-permeable, which makes a blocked gap at the eaves a fault worth finding. A range roof can be read from underneath as well: we check the rafters and the purlins (the long horizontal timbers under the rafters), note any daylight and photograph each timber that has gone soft.

Old Radnor is in Powys. Powys County Council holds the conservation area list, and the right step is to check your own address against it, then to ask whether an Article 4 direction applies. Roof windows and dormers carry Welsh limits that our planning guide for roof windows sets out. For the range roofs themselves, our listed and heritage roofing page describes the survey, the photographs and the way the consent question is raised. The survey also records the roofline of the farmhouse itself, since a listing that covers the ranges covers the house, and anything that changes how the roof looks is raised with you before the quote is written.

A listing that names the ranges covers their roofs as well as their walls.

A gutter run on a farm range

SoundEven fall to the outlet, brackets tight, no standing water
Needs workDips between brackets, sagging runs, overflow marks on the wall

Old Radnor roofs: stone tiles, stacks and consents

Can the stone tiles on an Old Radnor roof be repaired rather than replaced?

Where the slabs are sound, repair is the usual aim: slipped ones are relaid, split ones swapped and fixings renewed, with the battens below tested for soft timber. SPAB points to the quarries as the first check when someone says matching stone cannot be had. A full re-cover is a different decision, taken after the survey has shown the battens and underlay. The report describes the condition of your own slabs, not a forecast of their remaining years.

Is there a conservation area covering my Old Radnor house?

The conservation area list belongs to Powys County Council, which can tell you whether your address sits inside one. Conservation areas are designated under Part 4 of the Historic Environment (Wales) Act 2023. Ask whether an Article 4 direction touches your house too. Welsh permitted development stops short of a new roof light inside a conservation area, so that takes a planning application, and listed status adds listed building consent for anything that alters the building's special interest. We look at both questions before a quote is written.

Does re-roofing an Old Radnor farmhouse need Building Regulations approval?

On the Welsh Government's roof page, repairing or re-covering "less than 25 per cent of the area of a pitch or flat roof" means a building regulations application is not normally needed, but replacing or repairing "more than 25 per cent of the roof area" normally brings better insulation with it. Its re-roofing page says approval will be needed "in most situations". Before starting, we confirm the position with the council's building control service or a registered building control approver.

What do bats and nesting birds mean for work on an Old Radnor barn or range?

Section 1 of the Wildlife and Countryside Act 1981 treats intentional harm to a nest while it is being built or used as an offence, and intentionally taking or destroying one is covered too. Bats, and the roosts and breeding sites they use, are protected, and in Wales Natural Resources Wales licenses work that affects them. Droppings and nests are searched for from inside the roof space and along the eave line, photograph whatever is there, and pause the job to talk to you first if we find any.

What do published guides say a lead or ridge repair costs?

MyJobQuote puts a chimney lead flashing patch at around £200, a full replacement at around £570 and full leadwork at £350 to £920, while its 2026 average for replacing ridge tiles runs from £225 to £550. Those are national figures from a cost guide, and they do not describe your stack or ridge. Our written price, with the scaffold inside it, comes after the junctions have been photographed, and it is one total.

How long does a flat roof on a farmhouse extension last?

Published figures disagree, so we name both. HomeBuilding gives EPDM "25-30 years" and Less gives it "30 to 50 years". HomeBuilding gives GRP "25-30 years" where Less gives "25 to 40 years", and for felt HomeBuilding has "10-15 years" against Less's "10 to 20 years". Which? priced felt on a typical 6m by 3m garage at £1,400 to £3,500 in its November 2025 survey, before VAT. None of these describes your roof, so the survey reads the seams, upstands and fall.

Book a stone-tile survey in Old Radnor

Give us a few lines on the roof and any photograph you have taken of it. The survey comes first and the written price second.

10-year workmanship guarantee, in writing