Callout 1 of 3
Verges on cottages with a Grade II listing
A gable is the triangle of wall at the end of a pitched roof, and the verge is the line along which the roof stops against it: tiles or slates overhang the wall by a short distance and are bedded or fixed along the edge. Of all the lines on a roof it is the one that takes wind from the side. For volume three of its Herefordshire inventory, published in 1934, the Royal Commission put the monuments numbered 5 to 35 in Hope-under-Dinmore parish down as of the 17th century and timber-framed, covered in "tile or slate", so the frame beneath a verge of that age has had centuries to move.
Three houses here carry a Grade II listing: Village Farmhouse (list entry 1081998, first listed 21 May 1987), Hope Cottage (list entry 1081995, first listed 21 May 1987) and Old Woodlands (list entry 1081997). Section 7 of the Planning (Listed Buildings and Conservation Areas) Act 1990 makes listed building consent a requirement for any alteration that would touch "its character as a building of special architectural or historic interest". A listed house still has its permitted development rights, and consent applies on top. In practice the council is asked before a verge is rebuilt in a different way from the one it replaces, never afterwards.
At the verge we look for tiles that have lifted along the edge, for mortar that has cracked and fallen out from the bedding, and for gaps where the frame has drawn away from the covering. The undercloak is the narrow strip of slate or tile laid beneath the verge to give the mortar something to sit on, and where it has slipped the whole edge can sag. A bedded verge can be repaired by raking out and re-bedding. A dry verge uses a unit that is screwed to the gable and not mortared, and BS 8612 is the specification for those systems.
On a listed cottage the choice between the two is a conservation decision before it is a technical one, so we photograph the existing edge first and put the options to you and the council with those pictures in hand. Our listed and heritage roofing page describes how we approach that conversation, from the first photograph of the existing edge to the last course of the re-bedded verge, and it covers the smaller repairs that need nothing more than fresh mortar.
What the survey checks along a gable verge
- Tiles lifted along the edge
- Bedding mortar cracked or fallen out
- The undercloak strip beneath the verge
- Gaps where the frame has moved
- Bargeboard and fixings at the gable
The edge of a gable is where an old frame and a new repair meet, so we look there before we promise anything.















