01432 610152 Get a quote Call 01432 610152

Roofers in Ivington

Roof repairs and re-roofs for Ivington, 13.9 road miles north of Hereford.

Every survey runs from the top down, and the photographs, the findings and one written total reach you together.

Get a free quoteCall 01432 610152

Slate-covered stone, hop kilns and listed cottages

  • Older cottages with weathered clay tile roofs and brick chimneys behind a flint wall
    Slate-covered stone wallsThe Royal Commission's Leominster parish record includes a stone chapel under slate.
  • Slate roofs and chimney stacks along a red brick Victorian terrace
    A house with hop kilnsChipps House is listed with its attached kilns, so two roofs meet.
  • Newer homes with grey concrete tile roofs along a curving estate road
    Cottages near Leominster's conservation areasLeominster Town and Bargates are close, so check your address with the council.

The lie of Ivington

Ivington on a street map, with a dashed circle around the town and the nearest towns we cover. Tiles © Esri; map data © Esri, HERE, Garmin, OpenStreetMap contributors.

Ivington: slate cover, kiln junction, cottage row

Reading an Ivington roof: slate cover, the kiln junction and the cottage row

The Ivington survey starts with slate-covered stone, goes on to the valley where a house meets its attached kilns, and ends with the cottage row and the conservation areas just beyond the village.

A drawn cut-away section through a Herefordshire border house: the front of the main roof is cut open to show the rafters, underlay, battens and slates, beside a black-and-white timber-framed gable. Numbered, from the ridge down: 1 Slate and stone; 2 Kiln junction; 3 Cottage row.

Fig. 1 Ivington's slope, valley and eaves, numbered on one section through a border house.

Callout 1 of 3

Slate-covered stone: what the parish record shows

The survey opens on the slope. Ivington falls in Leominster parish, and the Royal Commission's 1934 volume for that parish describes Forbury Chapel as having walls "of stone" and roofs that are "slate-covered". The same volume puts the monuments it numbers 7 to 176 in the parish, unless it says otherwise, down as 17th-century houses of two storeys in timber frame, covered in tile or slate. Those are records of particular buildings. They are not a tally of the coverings on today's roofs, so we read yours directly.

Slate carries long published lifespans. HomeBuilding gives Spanish natural slate "75-100 years" and reclaimed Welsh slate "50-80 years". SPAB says the life of a well-slated roof is "likely to be more than 100 years", and notes that the term Welsh slate today implies slates from north-west Wales. Treat them as ranges and no promise, because a long life for the slate says nothing about the nails and battens under it.

Behind a slipped slate is a fixing that has let go. Replacing the slate without checking the fixing beside it only moves the problem a few inches along, so we lift the neighbouring slates, look at what holds them, and photograph the head lap, the overlap that stops rain reaching the batten. Where a run of slates has failed together, the report says so, and the question of repair or re-cover is put plainly, with the pictures beside it. Where slates are to be reused, they are sorted by size and thickness on the ground first, so that a course laid back on the roof runs true.

Re-covering falls under the Planning Portal's test for England. Below 25 per cent of the building envelope and below 50 per cent of the roof, no application is normally called for, and larger jobs go to building control. Our slate roofing page describes how we strip, sort and refix slate, and how reclaimed slate is matched when new is not wanted.

On a stone-walled building the eaves and gable need the same care as the slope. We check where the slates stop at the verge, how the wall head is finished, and whether the last course sits properly over the gutter. Each is photographed, because a loose verge slate looks minor from the ground and tells a different story up close.

Slate or tile

Can a slate roof be repaired in patches?

Yes, where the fixings beside the failed slates are sound. We lift the neighbours, check what holds them and photograph the head lap. If the fixings have gone along a whole slope, patching only moves the fault, and the report says so.

A slipped slate is a fixing question before it is a slate question.

Fig. 2 The slopes, drawn close

Callout 2 of 3

Where a house meets its attached kilns

Our next stop is a valley, the inward corner at which two slopes meet and shed rain into each other. At Ivington, Chipps House and Attached Hop Kilns is listed Grade II (list entry 1255320, first listed 24 July 1954). A listing that names attached buildings means two structures under one entry, and where two roofs of different height or pitch meet there is a junction. Every junction is a joint that must stay sealed.

Lead sheet is what we use at a junction. Royston Lead's brochure lists Codes 4 to 8 for a pitched valley gutter, and Codes 4 to 6 for flashings. Code 3 is "Recommended for lead soakers only", which rules it out of a valley. BS 6229 covers flat-roof membranes and not lead, and AD C cites BS 6915 for lead. A suitable code is selected for the job, then the sheet is dressed to allow movement as the two roofs warm and cool.

On lifespan, in MyJobQuote's words, lead flashing put in correctly "can last for over 80 years". That is a hedged line about flashings fitted well, and we do not turn it into a promise about a particular valley.

Consent comes before the first sheet is lifted. Under section 7 of the Planning (Listed Buildings and Conservation Areas) Act 1990, works that affect a listed building's character need listed building consent. The kilns are part of the entry, so work to either roof is work to a listed building. Householder rights remain on a listed house, with consent required in addition.

At the survey we photograph the valley from both slopes and along its length, check for debris and for lead that has lifted or split, and look at the flashing where a roof rises against a wall. The report matches each picture to a position on the plan. Lead that has lifted at a wall is recorded with a close shot of the chase it should sit in, which tells the next person exactly where the fault began. Our lead roofing page covers the work in detail, from soakers to full valleys.

Lead at a junction

Pitched valley
Codes 4 to 8 are listed for this use
Flashings
Codes 4 to 6 are listed for this use
Soakers
Code 3, recommended for soakers only
Standard
BS 6915, as AD C names it for lead
Fig. 3 The valley, drawn close

Callout 3 of 3

Bury Cottages, consent and the nearby conservation areas

The last callout is the eaves: along this line the covering projects past the face of the wall, with the gutter fixed beneath it. Bury Cottages are listed Grade II (list entry 1270354, first listed 9 February 1973). If your cottage shares a wall with a neighbour, the eaves, the gutter run and the party wall are shared concerns, and a repair on one side can affect the other. Party wall questions go to a party wall surveyor, not building control.

Listed building consent applies to a listed cottage under section 7 of the 1990 Act, and a roof edge is part of the building's character. Ask Herefordshire Council before the scaffold goes up, and have the council's reply in hand when the survey is written. If the answer is conditions on materials or method, those conditions go into the single written total.

Conservation areas sit just beyond the village. Two of them, Leominster Town and Leominster Bargates, lie near Ivington. Herefordshire Council's own list is where to check if your address lies inside either. Herefordshire has 64 in total, so a village can sit close to one without being in it. Check whether an Article 4 direction applies with Herefordshire Council as well, because a direction can withdraw specified rights from a defined area.

Insulation sometimes comes with a re-cover. AD L 2021, paragraph 4.13, says that "Generally, a thermal element once upgraded should not have a U-value greater than 0.7W/(m2·K)", and it eases the target if the upgrade would not repay itself within 15 years. That applies until AD L 2026 takes effect on 24 March 2027, with its payback rule at paragraph 3.14. A listed cottage raises its own questions on insulation, so ask building control before choosing a material. Where the roof is opened for repair, we photograph the rafters and the ceiling below, which gives you a record to show the control officer.

Herefordshire Council Building Control is the council's own team, and a registered building control approver is the private route. For the planning side of roof windows in a cottage roof, our planning guide holds the conditions. The listed and heritage roofing page covers how we work on protected roofs.

Price drivers on a listed cottage roof

Access
Scaffold height, and whether the highway is involved
Covering
How much sound material can be reused
Consent
Time taken and any conditions the council sets
Lead
How much flashing and valley needs renewing
Eaves
Condition of the rafter feet and the boards

One written total price, never itemised.

Ivington roofs: parish record, kilns and conservation areas

What did the Royal Commission record about roofs in Leominster parish, where Ivington sits?

In 1934 it noted a chapel at Forbury with stone walls and slate on the roof, and put its monuments 7 to 176 in the parish down as 17th-century, two-storey, timber-framed houses under tile or slate. That is a record of particular buildings from a long time ago, so on your own roof the survey checks what the covering is today before anything is priced.

How does a house with attached hop kilns change the roof work at Ivington?

Chipps House and Attached Hop Kilns is listed Grade II, list entry 1255320. Both roofs are therefore part of a listed building, and consent under section 7 of the 1990 Act is needed where works affect its character. The junction between the two roofs gets the closest look at survey, and Herefordshire Council is asked before any lead is renewed, with our photographs attached to the question so the council sees what we see.

Which conservation areas are near Ivington?

Leominster Town and Leominster Bargates are both near the village. Which areas take in your address is for Herefordshire Council's own list to show, and the county has 64 in all, so the map is worth a look before any roof work is planned. Check whether an Article 4 direction applies with Herefordshire Council too. Both answers can change what you may do to a roof without an application.

What approval does an Ivington re-roof need?

Ivington is in England, so the Planning Portal sets two limits: under 25 per cent of the building envelope and under 50 per cent of the roof. Inside both, no application is normally required. Beyond them, Herefordshire Council Building Control or a registered building control approver handles the paperwork, and insulation follows AD L 2021 Table 4.3 until 24 March 2027.

Is a scaffold licence needed on an Ivington lane?

Only where the scaffold obstructs a highway, since section 169 of the Highways Act 1980 then requires a licence. Herefordshire Council's page quotes £167 for a maximum of one month, £123 for each extra month after that, and asks for notice of at least 10 days beforehand. We arrange the licence with our scaffolder, and scaffold is covered within your one written total, so nothing extra is billed for it.

How long do lead valleys and flashings last?

MyJobQuote says correctly installed lead flashing "can last for over 80 years". It is a hedged figure for flashings, it assumes good fitting, and it is no promise for any one junction. The survey photographs each valley and flashing from both sides, and the report says where the lead has split, lifted or worn thin, and what each of those faults would mean for the junction.

Book a top-down survey in Ivington

Tell us which roof concerns you, attach a photo of the junction or the slope, and we will fix a date.

10-year workmanship guarantee, in writing