01432 610152 Get a quote Call 01432 610152

Roofers in Upper Hill

Roof and guttering work for Upper Hill's farmhouses, outbuildings and the homes built around them.

Upper Hill is 11.5 road miles from Hereford, about 21 minutes. We photograph each slope, valley and gutter run before pricing.

Get a free quoteCall 01432 610152

Where an Upper Hill roof needs closer looking

  • Older cottages with weathered clay tile roofs and brick chimneys behind a flint wall
    Gutters and the eaves lineA gutter set too flat or too full soaks the wall beneath it.
  • Slate roofs and chimney stacks along a red brick Victorian terrace
    Valleys between slopesLead or tile valleys gather rain from two slopes at once.
  • Newer homes with grey concrete tile roofs along a curving estate road
    Farmhouses and sheet roofsListed farmhouses and older sheet roofs each carry their own rules.

A map of Upper Hill

Upper Hill on a street map, with a dashed circle around the town and the nearest towns we cover. Tiles © Esri; map data © Esri, HERE, Garmin, OpenStreetMap contributors.

Upper Hill roofs, eaves to farmhouse

Gutters, valleys and farmhouse walls: the Upper Hill survey in three callouts

On an Upper Hill roof we begin where the rain leaves it, at the gutter and the eaves, then follow it up the valley between two slopes and finish at the farmhouse walls whose listings decide what consent a repair needs.

A drawn cut-away section through a Herefordshire border house: the front of the main roof is cut open to show the rafters, underlay, battens and slates, beside a black-and-white timber-framed gable. Numbered, from the ridge down: 1 Gutter line; 2 Valleys; 3 Farmhouse walls.

Fig. 1 A drawn roof in section, with the three Upper Hill callouts numbered from the eaves up.

Callout 1 of 3

Gutters, falls and the eaves line at Upper Hill

Every slope ends at a gutter, so our first callout is the place where the roof hands its rain to the drainage. A gutter works only when its run slopes to the downpipe. Brett Martin advises a drop of "1mm for every 600mm" of run, which is a gradient too slight to see from the ground and easy to lose when a bracket sags or a fascia board rots. A spirit level shows us the fall, and we look for staining on the wall beneath, since a green or dark stripe below a joint tells you where water has been spilling for a while.

The eaves are the lowest course of the covering and they hide more than they show. Under the first row of tiles or slates sits the eaves tray or underlay, and behind the fascia sit the rafter feet. If the underlay has dropped, rain runs behind the gutter and into the timber instead of into it. If a cold roof carries HR underlay (the high-resistance kind), Marley asks for an air gap along the eaves: 25mm for pitches of 15° or less and 10mm for steeper ones. Because that underlay does not let vapour through, a blocked gap traps moisture in the loft. We look into the eaves from inside the loft for daylight and for stained rafter feet, and from outside for a gap choked by a dropped liner or a bird's nest.

Cleaning and repair come before replacement. A gutter choked with moss and leaf litter overflows long before it fails, and many are cleared, re-levelled and re-jointed with the original run kept. Where a run has cracked, split or pulled away, we replace the section and the brackets together and explain why. Cast iron, aluminium and plastic runs each have their own joints and fixings, so we match the replacement section to what is already on the wall, down to the profile of the run and the spacing of the brackets. The same visit takes in the soffit boards under the eaves, because a sagging soffit can show that a gutter has been overflowing for a long while. Where the fascia boards behind the gutter have rotted, the fault is carpentry first and guttering second, and the report's photographs pin down exactly where the rot has set in.

Our guttering, soffits and fascias page covers repairs and replacements in more detail, including what sets the price of a full run. The same visit lets us check the ridge and the verge from the ladder, so one set of photographs covers the whole roofline.

Checked along an Upper Hill gutter run

  • Fall toward the downpipe
  • Brackets, joints and sagging sections
  • Fascia and soffit boards behind
  • Underlay sitting over the gutter edge
  • Staining on the wall below
Fig. 2 Gutters and downpipes, drawn close

Callout 2 of 3

The valley, where two slopes meet

Callout two follows the water uphill to the valley, the trough where two roof slopes meet and run their rain down together. A valley takes the water from a large area and funnels it into a narrow channel, so one failure there shows up inside the house quickly. There are three common kinds. A lead valley is a sheet of lead laid in the trough and lapped by the tiles on both sides. A tiled valley is built from special valley tiles cut to follow the line. A GRP or sheet valley is a moulded liner. Each has its own way of wearing out.

Where a pitched valley is lined in lead, the weight of the sheet matters. Royston Lead's table lists Codes 4, 5, 6, 7 and 8 for a pitched valley gutter, keeping Code 3 for lead soakers alone. The length and the width of the channel decide which of those thicknesses goes in. MyJobQuote says correctly installed lead flashing "can last for over 80 years", so a valley with sound lead needs only checking for lifted edges and cracked tiles beside it.

The signs of trouble are plain enough from the ground and plainer from a ladder: moss packed into the channel, tiles that have slipped away from the edge of the lead, a split along a crease in the sheet, or a brown mark on the ceiling immediately under the line of the valley. We lift the adjoining tiles to see the lead itself and the boards under it, and every layer is photographed as it is uncovered. If the lead has cracked along a fold, patching can hold for a while, but a worn valley can want a new sheet laid properly.

Roofs where one slope meets another at a dormer or an extension have valleys of their own, sometimes at different angles. Our lead roofing page explains how sheet lead is cut, dressed and fixed so that it can expand without tearing.

Valley questions

Can a leaking valley be patched, or does it need relaying?

A split along one fold can sometimes be mended if the rest of the sheet is sound and the boards beneath are dry. When the lead has thinned, cracked in several places or lifted at the edges, relaying the valley is the lasting answer. The lead and the boards are photographed first, and only then do we say which.

Fig. 3 The valley, drawn close

Callout 3 of 3

Lodge Farmhouse, Yoke Farmhouse and the older sheet roofs

The last callout is the wall that carries the roof, and in Upper Hill the walls are those of farmhouses. Lodge Farmhouse is listed Grade II (list entry 1081999, first listed 21 May 1987), and so is Yoke Farmhouse (list entry 1157438, first listed 21 May 1987). Upper Hill shares its civil parish with Birley, and the Royal Commission's 1934 inventory of Birley parish said its monuments 2 to 6, unless otherwise described, "are of the 17th century and of two storeys, timber-framed and with stone, slate, tile or ironcovered roofs". A listed house needs listed building consent for works that change its character, and it keeps its permitted development rights as well.

Herefordshire Council keeps the county's list of conservation areas, which numbers 64, and its planning team will confirm if your address lies within a boundary. Check whether an Article 4 direction applies with Herefordshire Council as well. Under such a direction, work that normally needs no application may need one.

Not every old roof here is slate or tile, and a sheet roof on an outbuilding or a barn raises a question that comes before any price: is it asbestos cement? HSE's rule of thumb: if the outbuilding dates from before 2000, or was refurbished before then, assume asbestos, and it warns that "AC roofs are always fragile", so nobody should step onto one. Sound sheets lifted off carefully, unbroken, are non-licensed work. Sheets already badly damaged, or ones that would shatter during removal, make the job notifiable non-licensed work, and Upper Hill waste is hauled in a skip with a lock, never an open one. Where the sheets are sound the report records that, and where they are not it names the safe next step, with photographs from ground level and from the eaves.

Building control for an Upper Hill address is Herefordshire Council Building Control, on 01432 261938, or a registered building control approver. Our listed and heritage roofing page explains how we prepare a listed house for consent, and the planning guide for roof windows covers any new opening.

What sets the price on a farmhouse roof

Access
Height, a long run of eaves and any scaffold needed
Covering
Slate, tile or stone, and whether it is reused
Timber
Battens, boards and rafter feet found rotten
Consent
Listed building consent and the time it takes
Waste
Old covering taken away, asbestos included where found

One written total price, never itemised.

Upper Hill roofs: gutters, valleys and rules

Why does water run behind the gutter on an Upper Hill house?

The underlay at the eaves may have dropped below the gutter's back edge, or the fall has been lost so the run overflows. We check the fall against Brett Martin's guide of 1mm for every 600mm, look at the eaves tray and the fascia, and photograph the stain on the wall. A cleaned and re-levelled run may be all it needs, while rotten boards behind it need carpentry first.

Can I replace the covering on a listed Upper Hill farmhouse myself?

Not without checking first. Lodge Farmhouse and Yoke Farmhouse are listed Grade II, and for a listed house the works need listed building consent whenever they would change its character. Permitted development rights stay in place, but consent adds a further step. Our part is to record the roof as it stands, write the materials down and agree the plan with Herefordshire Council before a single slate is ordered.

Is an Upper Hill address covered by a conservation area or an Article 4 direction?

Herefordshire Council holds the list of conservation areas, 64 across the county, and its planning service can say whether a boundary takes in your house. Check whether an Article 4 direction applies with Herefordshire Council at the same visit, because a direction can add controls to work that would otherwise need no application. Settle that before drawing up plans for a new covering or an extra window.

How much insulation does an Upper Hill re-roof need?

If the work counts as renovating the roof, England's AD L 2021 Table 4.3 sets a threshold of 0.35 and an improved figure of 0.16 for the roof's U-value. Para 4.13 relaxes the figure where 0.16 is not achievable on site or would need over 15 years to repay, though a renovated roof should generally not be worse than 0.7. Your building control body confirms which figure applies to the job in hand. AD L 2026 replaces this from 24 March 2027.

Is the sheet roof on my Upper Hill outbuilding asbestos?

It might be. HSE's advice is to take any pre-2000 building, or one refurbished before 2000, as containing asbestos, and its guidance calls AC roofs fragile every time. Do not drill into it or walk across it. We can look at the sheets from the ground and the eaves and tell you what to arrange next. Careful removal of sound sheets is non-licensed work, and an open skip is never the right place for the pieces.

What does MyJobQuote say gutter replacement costs?

MyJobQuote gives the average gutter replacement cost in the UK as around £1,000 to £1,600, with standard uPVC at around £40 to £50 per metre. Which?, in November 2025, gave £75-£350 for clearing every gutter on a house, excluding VAT. Those numbers are the guides' own, not ours. After the survey comes one written total covering the whole job, scaffold and waste removal included.

Ask for an Upper Hill eaves-to-ridge survey

Send a photograph of the gutter line or the valley, and we will go over the entire roof from the eaves upward.

10-year workmanship guarantee, in writing