01432 610152 Get a quote Call 01432 610152

Roofers in Marden

Slate roofs, lead valleys and gutters looked after in Marden, 5.4 road miles north of Hereford.

We photograph each fault on your Marden roof, explain what it means and send one total price in writing.

Get a free quoteCall 01432 610152

What wears a Marden roof

  • Older cottages with weathered clay tile roofs and brick chimneys behind a flint wall
    Slate over old timberSeventeenth-century frames carry slate or tile and need a careful hand.
  • Slate roofs and chimney stacks along a red brick Victorian terrace
    Valleys and leadAt an inside corner, lead valleys carry away the water from both slopes.
  • Newer homes with grey concrete tile roofs along a curving estate road
    Eaves, gutters and fasciasSagging gutters leave the fascia board and rafter ends damp.

Marden and the miles from Hereford

Marden on a street map, with a dashed circle around the town and the nearest towns we cover. Tiles © Esri; map data © Esri, HERE, Garmin, OpenStreetMap contributors.

Marden roofs, slope to gutter

Reading a Marden roof from the slate slopes through the valleys to the gutters

Our order here runs downhill: the slate and tile slopes first, the lead valleys where a pair of slopes join next, then the eaves and gutters, with the listings that shape how repairs are agreed.

A drawn cut-away section through a Herefordshire border house: the front of the main roof is cut open to show the rafters, underlay, battens and slates, beside a black-and-white timber-framed gable. Numbered, from the ridge down: 1 Slate slopes; 2 Lead valleys; 3 Fall and roofline.

Fig. 1 A border house drawn in section, with the Marden slope, valley and gutter picked out.

Callout 1 of 3

Slate and tile on the Marden slopes

The Royal Commission's 1932 inventory of Herefordshire records that at Marden's parish church "the roofs are slate-covered." For the parish's other buildings, numbered 7 to 76 in the inventory, it gives a wider description: unless stated otherwise they are of the 17th century, two storeys high, framed in timber and roofed with tile or slate. That tells us what to expect on a survey here, an old frame underneath and a covering above it that may have been re-laid since the house was built.

Natural slate is split thin, trimmed and hung on a batten, which is the timber strip each course rests on, by a nail or a hook. When a slate slips, the overlap that should shed water opens up, and the course above shows a dark gap. Slate meeting a timber frame at a gable edge is another weak point, because a gap between the two lets wet in behind the verge. HomeBuilding lists Welsh slate at "100+ years", Spanish natural slate at "75-100 years" and reclaimed Welsh slate at "50-80 years". A roof at the far end of those ranges is a reason to inspect the nails and battens before deciding whether to repair or re-cover, because the fixings may give out well ahead of the slate.

We climb up, photograph each slipped or broken slate where it sits, and lift the courses around it to see the fixings from behind. In the loft we check the underlay for tears and the timbers for staining. A slate roof with a handful of loose pieces is mended piece by piece, and the report says plainly when that is the better buy than starting again.

Marden is in England, and the Planning Portal gives this test for a re-roof: no Building Regulations application is normally needed when the work affects less than 25 per cent of the building envelope and less than 50 per cent of the roof. Insulation is judged separately under Part L. For renovation, AD L 2021 Table 4.3 gives a threshold of 0.35 and an improved figure of 0.16, until AD L 2026 Table 3.3 takes over on 24 March 2027. Our slate roofing page goes into the material in more detail.

What a Marden slate survey records

Slipped slates
Counted and photographed where they sit
Nails and hooks
Seen from behind the lifted courses
Battens
Soundness of the timber under the slates
Underlay
Tears and staining seen from the loft
Pitch
Measured, because it limits what can be laid

A slate roof with a few loose pieces is mended a piece at a time.

Fig. 2 The slopes, drawn close

Callout 2 of 3

Lead valleys where two slopes meet

An inside angle between two slopes is called a valley, and the rain from both of them runs into it. Many valleys are lined with sheet lead, laid as a channel between the tiles or slates on either side. Royston Lead's table marks the codes suited to a pitched valley gutter: Codes 4, 5 and 6, and the heavier Codes 7 and 8. Code 3 is, in the table's words, "Recommended for lead soakers only", so it does not belong in a valley. When we open one up, we work out which code is already down before suggesting a replacement.

A valley can fail in a few ways. The lead may crack along a fold. Leaves and moss may dam the channel, so that water backs up and creeps sideways under the covering. The slates or tiles beside it may have been cut so badly that the channel is too narrow. A blocked valley is cleared and the lead looked over. According to MyJobQuote, lead flashing "can last for over 80 years" once correctly installed, which is why sound lead stays in place. Sheet lead sits outside BS 6229, which covers membranes only, and AD C refers instead to BS 6915 for lead.

Marden has listed buildings of its own. The National Heritage List records Leystone Bridge at Grade II* (list entry 1348952, first listed 20 October 1952), Upper Paradise Farmhouse at Grade II (list entry 1099365, first listed 15 July 1985) and Bradnor at Grade II (list entry 1099375). Section 7 of the Planning (Listed Buildings and Conservation Areas) Act 1990 requires consent before any work that alters what gives a listed house its special interest, while the house retains its permitted development rights alongside.

Churches and chapels follow a different path, and a closed church is handled as an ordinary listed building. Where worship continues, the exemption from listed building consent reaches only certain bodies: the Church of England works through its faculty system, while Catholic, Methodist and URC buildings keep routes of their own, as do Baptist Union buildings where the trustee is one of the Schedule 1 corporations. Unitarian and Quaker meeting houses stand outside it. More on sheet lead, from soakers to valley linings, sits on our lead roofing page.

Valley words, explained

Valley gutter
A lead channel at the inside angle where two slopes meet.
Lead code
A number giving the thickness of a sheet of rolled lead.
Soaker
A small piece of lead tucked under the course beside it.
Upstand
The vertical lip of lead that turns up at a channel's edge.
Fig. 3 The valley, drawn close

Callout 3 of 3

Eaves, gutters and the Marden roofline

The last stop is the eaves, the point at which roof water passes to the gutters. A gutter must lie at a slight slope towards its outlet. Brett Martin's installation advice sets the fall at "1mm for every 600mm", so a gutter that holds a pool along its length has sagged out of position. Overflow at the joints soaks the fascia board behind it and the ends of the rafters, which is why we look at the gutter and the timber together.

The fascia is the long board across the rafter ends carrying the gutter, while the soffit is the panel fixed under the overhang, out of sight from the ground. Marley's guidance on cold roofs asks for a continuous 10mm gap along the eaves when the pitch is more than 15 degrees, and 25mm at 15 degrees or less. High-resistance underlay does not let vapour through, so solid boarding that blocks that gap is a worry. We check the ventilation as well as the boards, and we photograph the gap so you can see it.

In England, Natural England licenses any work affecting bats, so a roost found at the eaves stops the job until a plan is agreed. Nests are covered too, because the 1981 Wildlife and Countryside Act protects a nest from intentional damage while it is active or half made. We plan the work around both.

Eaves work on a house that fronts the road can need a scaffold on the highway. That takes a licence under section 169 of the Highways Act 1980, and we arrange the licence with our scaffolder. Herefordshire Council's own list of conservation areas shows whether a Marden address falls inside one, and the council can say whether an Article 4 direction applies. Building control is Herefordshire Council Building Control on 01432 261938, with a registered building control approver as the alternative. Our guttering, soffits and fascias page covers the replacement options.

Replacement boards can be uPVC. A fascia retailer, who has an interest in selling them, says they can typically keep performing reliably for between 20 and 40 years, so we treat that as a guide, not a promise. Timber boards that are still sound can be repaired and repainted instead, and the report says which route suits the board in front of us.

Gutters and the road

Does a gutter repair on a Marden road frontage need a scaffold licence?

Only when the scaffold sits on or above the highway. Our scaffolder obtains the licence, and its cost is already within the one price you receive. A ladder or tower on your own ground does not occupy the road.

Marden roofs: slate, lead and gutters

How long should a slate roof in Marden last before it needs re-covering?

It depends on the slate. HomeBuilding gives Welsh slate 100+ years, Spanish natural slate 75-100 years and reclaimed Welsh slate 50-80 years. Treat these as typical ranges rather than promises. The nails and battens can decide the matter before the slate does, so the survey looks at the back of the courses, photographs what it finds and says whether mending or re-covering is the honest answer.

What is a lead valley and how can I tell when mine is failing?

A lead valley is the lined gutter in the inside corner between two roof planes. Signs of trouble are a brown stain on the ceiling beneath, moss or leaves packed into the channel, and lead cracked along a fold. When a valley is blocked, water is pushed sideways beneath the tiles or slates. We clear it, look closely at the lead and photograph what we find for you.

How do I check whether my Marden house is in a conservation area?

Look at Herefordshire Council's own conservation area list and its boundary maps, because those are the record that counts. The county has 64 conservation areas. Also ask the council directly whether an Article 4 direction covers your particular address, because a direction can remove permissions a house would otherwise have. Do this before you pay for drawings or order any materials.

Is Building Regulations approval required to re-slate a house in Marden?

Marden is in England, so the Planning Portal test applies. A Building Regulations application is not normally needed while the work touches less than 25 per cent of the building envelope and under 50 per cent of the roof. Anything that adds 15 per cent or more to the weight must be approved, once a structural check is done. Insulation falls under Part L.

What does a listed building in Marden need before its roof is repaired?

Listed building consent under section 7 of the Planning (Listed Buildings and Conservation Areas) Act 1990 is required for any works that alter its special character. Permitted development rights for the house stay in place alongside it. Upper Paradise Farmhouse is Grade II, and the council can say whether a given repair counts. We talk to the council before the roof is opened.

How much is the scaffold licence fee on a Marden street?

Herefordshire Council asks £167 for a maximum of one month, £123 per month thereafter. Its guidance asks for 10 days' notice at the least, and we arrange the licence with our scaffolder. If a Marden scaffold needs main-road space, we ask the council who licenses it before the survey report is written, and the Marden price in writing already allows for the scaffold.

Ask for a Marden roof survey

Describe the slates, valleys or gutters that worry you, or attach a picture of them, and a survey date follows.

10-year workmanship guarantee, in writing