01432 610152 Get a quote Call 01432 610152

Roofers in Aylestone Hill

Valleys, slopes and listed walls: roof work for the Aylestone Hill streets.

Aylestone Hill is part of Hereford, 1.1 road miles from the city centre, with a conservation area designated in 1969.

Get a free quoteCall 01432 610152

Three things we look at on Aylestone Hill

  • Older cottages with weathered clay tile roofs and brick chimneys behind a flint wall
    Lead-lined valleysWhere two slopes meet, one lead channel carries the rain from both.
  • Slate roofs and chimney stacks along a red brick Victorian terrace
    Re-covering rulesReplacing slates or tiles raises weight, insulation and building control questions.
  • Newer homes with grey concrete tile roofs along a curving estate road
    Listed buildings near the centreElmhurst, Athelstan Hall and Beech Tree House are listed buildings near the centre.

Where Aylestone Hill sits

Aylestone Hill on a street map, with a dashed circle around the town and the nearest towns we cover. Tiles © Esri; map data © Esri, HERE, Garmin, OpenStreetMap contributors.

The Aylestone Hill roof, valley to listing

Valleys, slopes and listed neighbours on an Aylestone Hill roof

We take the survey in order: the valleys where slopes meet, the slopes and their covering, then the listed buildings and conservation-area rules that apply on Aylestone Hill. Each section ends with what we photograph for you.

A drawn cut-away section through a Herefordshire border house: the front of the main roof is cut open to show the rafters, underlay, battens and slates, beside a black-and-white timber-framed gable. Numbered, from the ridge down: 1 Valley lead; 2 Slate and tile; 3 Listed walls.

Fig. 1 A roof in section, with valley, slope and wall marked for Aylestone Hill.

Callout 1 of 3

Valleys where two Aylestone Hill slopes meet

Where two slopes of a roof tilt down towards each other, the angle between them is a valley. All the water coming off both slopes drains into that one channel, which makes it the hardest-working part of a roof in a downpour, and a defect there shows itself quickly inside the house. Valleys are built in more than one way. Some are lead-lined gutters set between the tiles or slates, others are formed from tile or slate cut to a curve, and the survey records which kind you have before anything is lifted.

On a lead-lined valley we examine the sheet and its edges. Royston Lead's table lists Codes 4, 5, 6, 7 and 8 for pitched valley gutters, and Code 3 only for soakers. A sheet that has split along a fold, lifted at a lap or worn thin under a patch of leaf litter will pass rain to the boards beneath. The channel must also stay open. Moss, fallen leaves or a slipped slate can dam it, so that rain backs up under the covering on both sides. Clearing the channel is the first task, and a photograph taken once it is clean lets you see the lead for yourself.

Lead lasts well when it is laid properly. HomeBuilding gives a lead flat roof "60-100 years", Less gives "50 to 100 years", and MyJobQuote says correctly installed lead flashing "can last for over 80 years". Those are ranges from sources that differ a little, never promises, and a valley with a poor fall or a thin code can fail sooner. Water also needs somewhere to go at the foot of the valley, so the gutter below it is cleared and its outlet checked as part of the same visit. When a valley does need relaying, the covering is lifted along both edges, the old lead comes out and new sheet goes in with a clear fall towards the gutter. A split lap is a small repair, while a valley worn along its whole length is a relaying job, and the survey separates the two. Our lead roofing page covers valleys, flashings and flat lead work in more depth.

Checked along an Aylestone Hill valley

  • Splits or lifted laps in the lead
  • Moss, leaves or a slipped slate in the channel
  • A clear fall towards the gutter
  • Covering at both edges of the valley
  • The lead where the valley meets the eaves

A valley carries two slopes of rain in one channel, so we look at it before anything else.

Fig. 2 The valley, drawn close

Callout 2 of 3

Re-covering a slope: weight, insulation and approval

Between the ridge and the gutter lies the slope, the main plane of covering. The survey asks what the slope is made of, how it is fixed and how long it has left. Lifespans are ranges and never promises. HomeBuilding puts Welsh slate at "100+ years", Spanish slate at "75-100 years" and reclaimed Welsh slate at "50-80 years", while SPAB says a roof that is well slated is likely to last more than 100 years. A few slipped or cracked slates make a repair job. A slope whose nail fixings are failing across its whole area is another matter, and the photographs will show which one you have. Battens, the timber laths under the covering, get the same scrutiny, because a sound slate on a rotted batten will not stay in place for long. Underlay, the membrane beneath the battens, is checked wherever the loft gives us a view of it.

A re-cover raises three separate questions. The first is approval. In England the Planning Portal's guidance is that normally no application is needed when "Less than 25 per cent of the total 'building envelope'" is affected and "Less than 50 per cent of the roof is affected". The second is weight. A new covering that adds 15 per cent or more to the load needs approval according to the Portal, and AD A para 4.4 calls a significant change one of "more than 15%". Swapping slate for a heavier tile is where that bites, and a structural check has to come first. The third is insulation, because a roof counts as a thermal element and renovating one brings Part L into the job.

Slate also needs the right fixing. Cupa, the slate supplier, notes that, in moderate exposure, BS 5534 puts the lowest pitch for natural slate at 20 degrees, with a 500mm slate and a 115mm overlap, and advises against slate hooks on a pitch under 25 degrees. Our slate roofing page explains how we strip, sort and relay a slate slope, and sound slates are kept for re-use wherever the survey finds them fit to go back.

Weight and the new covering

Can a heavier covering go onto an old roof without a check?

Not once the new covering weighs 15 per cent or more than the old one, because that is the Planning Portal's trigger for approval and a structural check. A covering of similar weight raises a different question, and we confirm the figures at the survey.

Sound slates that can go back on the roof are worth more than new ones that do not match.

Fig. 3 The slopes, drawn close

Callout 3 of 3

Listed buildings and a conservation area from 1969

The last callout is the wall beneath the eaves line, where the survey turns from the building to the rules around it. Aylestone Hill has entries on the National Heritage List for England close to its centre. Elmhurst (list entry 1207795) and Beech Tree House Danesmere (list entry 1187224) are both Grade II and were first listed on 27 July 1994, and Athelstan Hall is Grade II as well (list entry 1297452). Herefordshire Council's list gives the Aylestone Hill conservation area as designated in 1969, and Herefordshire has 64 conservation areas in all.

Works to a listed house fall under section 7 of the Planning (Listed Buildings and Conservation Areas) Act 1990, which requires consent for anything that "would affect its character as a building of special architectural or historic interest". A listed house keeps its permitted development rights and needs that consent as well, so the council agrees materials and method before work begins. On a slate roof that conversation can begin with re-using the existing slates. We photograph each elevation, the verges and the chimney details before the application is made, so the council sees the roof as it stands and the proposed work can be set against it. Where a covering has to change, the photographs also record the colour, size and thickness of the old material.

A new window in an Aylestone Hill slope still deserves thought before anyone draws it. Our planning guide for roof windows sets the rules out, so read it before you plan a new opening. Check whether an Article 4 direction applies with Herefordshire Council as well. Building regulations questions on an Aylestone Hill roof go to Herefordshire Council Building Control on 01432 261938, and a registered building control approver is the private alternative. Our listed and heritage roofing page describes how we handle protected houses.

On a listed house the consent conversation begins before the scaffold goes up.

Rules that sit over an Aylestone Hill roof

Listed house
Listed building consent on top of permitted development
Conservation area
Designated 1969 on Herefordshire Council's list
Article 4
Ask Herefordshire Council whether one applies
Building control
The council or a registered approver
Roof windows
Read the planning guide before planning one

Aylestone Hill roofs: valleys, slate and listing

How do you inspect a lead valley on an Aylestone Hill house?

We look at the sheet along its full length, at every lap and fold, and at the covering on both edges. Leaves, moss and slipped slates in the channel are cleared first and photographed. We then check the fall towards the gutter and the point where the valley discharges. The photographs go into your report, so you can see whether the lead needs patching or relaying before any price is set. The loft side of the valley is examined too.

What does a new roof window need in the Aylestone Hill conservation area?

Our planning guide gives the English position for a window cut into a slope, and Herefordshire Council confirms it for your house. On the building side, AD L 2021 Table 4.2 gives roof windows 1.4 or WER Band B and rooflights 2.2, until AD L 2026 takes over on 24 March 2027. Ask Herefordshire Council whether an Article 4 direction applies to your street before you commit. The size and position of the opening are settled at the survey.

Can a re-slate on Aylestone Hill avoid a Building Regulations application?

England's Planning Portal test applies here. Work affecting less than 25 per cent of the building envelope and less than 50 per cent of the roof does not normally need an application. A whole-slope re-cover can exceed the roof limit, so building control is involved. The Portal also names a weight increase of 15 per cent or more as a trigger, which matters whenever the new covering weighs more than the old. Insulating at the same time brings Part L into the job.

What does it cost to replace a few tiles on a roof like mine?

Which? reported in November 2025, excluding VAT, that replacing one to six tiles costs £75 to £400, and a new ridge tile £80 to £300. Those are typical UK ranges, not our prices. Access and the height of the roof move the number, and so does the covering. Whoever quotes, ask the figure to state if scaffolding and VAT sit inside the total.

How are old slates re-used on a listed Aylestone Hill house?

Each slate comes off by hand and is sounded for cracks, then sorted into a pile to keep and a pile to discard, and the keepers go back on new battens with fresh fixings. Where extra slates are needed we match size and colour to the old. SPAB advises checking any claim of poor availability or long delivery times with the quarries themselves, so we follow that advice before we suggest any change of material.

Is my Aylestone Hill house one of the listed buildings nearby?

Historic England's list is the place to check, because it holds the official entry for each building. Elmhurst, Beech Tree House Danesmere and Athelstan Hall are three Grade II entries in the area. Check a house against the list and the council's conservation area map before planning any work, and ask us to read both with you at the survey. A house that is not listed can still sit inside the conservation area, and the two sets of rules are separate.

Have your Aylestone Hill valleys checked

Send a few lines or a photograph, and a survey follows with one total price on paper.

10-year workmanship guarantee, in writing