Callout 1 of 3
Roof windows, insulation and escape from a loft room
A loft conversion changes a roof from a cover over empty space into the outer shell of a room. That brings Building Regulations into the work in three ways: the structure, the insulation and the escape route. Under AD L 2021 Table 4.2, the energy figure for a roof window is 1.4, or else Window Energy Rating Band B. A rooflight, the glazed unit on a flat roof, is set at 2.2.
Insulation is the second. A loft being converted falls under renovation in AD L 2021 Table 4.3, with a roof threshold of 0.35 and an improved figure of 0.16. Paragraph 4.13 eases the improved figure where reaching it is impractical, or where payback would stretch beyond 15 years. The roof is then upgraded as far as it can be, and generally should not be left worse than 0.7. From 24 March 2027, AD L 2026 Tables 3.2 and 3.3 replace those numbers. Hampton Dene is in England, so these English tables apply.
Escape is the third. Approved Document B, in its 2019 edition incorporating the 2020, 2022, 2025 and 2026 amendments, deals with a storey more than 4.5 metres above the ground. Paragraph 2.5 calls for a protected stairway, or alternatively another escape route, meaning a top storey separated from the floors below with its own way out. For open-plan ground floors, paragraph 2.23 sets out a different way to comply, built on sprinklers and a fire-resisting partition with a door. Escape windows under paragraph 2.10 apply to storeys within 4.5 metres of the ground. Which of those suits a given house turns on its layout, and building control decides.
We cannot sign off a design, but we can tell you what to ask, and we record the existing rafter sizes, the span and the condition of the timber so that whoever designs the room starts from facts instead of guesses. A room in the roof also loads the structure differently from an empty loft, which is why the sizes are noted before any quote is written. Herefordshire Council Building Control is on 01432 261938, and a registered building control approver is the private option. Cutting a roof window into a slope involves trimming rafters, flashing the frame and, on some houses, a short run of scaffold. Our Velux and skylight installation page covers the fitting, and our planning guide for roof windows covers the planning side.
Rules behind a Hampton Dene loft room
- Roof window
- 1.4 or WER Band B, AD L 2021 Table 4.2
- Rooflight
- 2.2, for glazing on a flat or low roof
- Converted roof
- Table 4.3, 0.35 threshold, improved 0.16
- Upper storey
- AD B para 2.5, stairway or alternative route
A loft room turns a roof into a wall, a ceiling and an exit all at once.















