In brief
A registered building control approver is a private-sector business registered to check building work against the Building Regulations, in place of the council's building control service. The Building Safety Regulator (BSR) holds the register in England and in Wales. Building control is done by the council or by a registered building control approver, and the question arises when a job needs approval, such as a re-roof that crosses the tests.
What a registered approver does
When roof work needs Building Regulations approval, someone independent has to check it. Two kinds of body can do that. One is the council's building control service. The other is a registered building control approver, a private business that offers the same check.
Both look at the same things: the structure under a heavier covering, the fire performance of the new covering, and the insulation that a new or renovated roof has to reach. The Building Regulations they apply are the same for a given job. What differs is who you appoint, and whose name is on the certificate at the end.
The registration is what makes a private firm an approver. It is a status you can confirm on the register, and it is worth confirming before any money changes hands.
For roofing, this comes up at a few points: a re-roof that passes the thresholds, a loft conversion, a new roof light, or the removal of a chimney breast. Ask which body will check your job, and ask the roofer to say in writing who contacts them and when.
Who registers them in England
GOV.UK states the rule for both countries: "All private sector businesses that want to do building control work in England and Wales under the Building Act 1984 (as amended) must apply to register with the Building Safety Regulator (BSR)." So the BSR holds the register that you can check.
In England, the registration regulations state: "These Regulations come into force on 6th April 2024." That date is when registration began, not when private building control began. GOV.UK's guidance asks applicants whether they are, or were, registered with CICAIR, which shows private firms were doing this work before 2024.
Do not read the 2024 date as the start of private building control. It is the start of the register. A business that is not on it has not registered to do the work, whatever its website says.
- In England, look up the firm on the BSR register before you appoint it.
- In England, the council's building control service remains an option alongside a registered approver.
- In England, a Herefordshire address is served by the council, as our page on who does building control in Herefordshire explains.
Who checks them in Wales
In Wales, the Welsh Government states that the BSR "serves as the main regulatory body for the building control profession in Wales, operating on behalf of the Welsh Ministers". It says the BSR regulates registered building inspectors and registered building control approvers in Wales.
It then draws a line: "The BSR does not regulate local authority building control in Wales. Local authorities are regulated by the Welsh Ministers." Councils and private approvers are therefore overseen by different bodies, though the checks come from the same set of regulations. Our page on who regulates building control in Wales sets out the Welsh side.
The Welsh dates run on their own track:
- The Registered Building Control Approvers etc. (Wales) Regulations 2024 came into force on 1 January 2025.
- New building regulations came into force on 1 July 2026, reforming building control, particularly for higher-risk building work.
- That reform includes an automatic lapse of building control approval after three years.
For a roof in Wales, ask the council's building control service or a registered approver which procedure applies to your job.
Choosing a body for your roof job
Your roofer should tell you whether your job needs approval at all, and say so in the quote. In England, the Planning Portal sets a test of less than 25 per cent of the total building envelope and less than 50 per cent of the roof. In Wales, the gov.wales page on re-roofing begins from the words "In most situations, this work will need Building Regulations approval". If approval is needed, three questions help:
- Will the council or a registered approver check the job?
- Is the approver on the register, and does the certificate carry the firm's name?
- Who contacts them, and when, before the first slate is lifted?
- Where will the approval papers be kept once the job ends?
We check with the council's building control team before we start, and we tell you which body is dealing with your job. Keep the certificate and approval papers with your house deeds, because a buyer's solicitor may ask for them when you sell. To confirm the register, use the official GOV.UK guidance on registered approvers.
See what a written roof quote covers for where approval belongs in the price. Our roofing across Hereford and the border includes the approval step.
