SPAB says a well-slated roof is "likely to be more than 100 years" old before it wears out, so slates taken from an old roof can still have work left in them. When a roof is stripped, the slates that come off sound can be cleaned, graded by size and sold on as reclaimed Welsh slate. Beside an existing Welsh slate roof, they give the nearest match to what is already up there.
Reclaimed does not mean better or worse than new. It means the slates carry their history: old nail holes, weathering, mixed sizes and an unknown amount of life still to run. Whether that suits a roof depends on the slope, the house and the job, whether that is closing a few gaps or covering a whole elevation.
The sections below cover the meaning of the name, the published lifespan figures, where reclaimed slate earns its place, the faults to look for, the pitch and fixing questions, and the approval rules in each country. To see the covering in its wider setting, go to our slate roofing page.
What the name Welsh slate covers
SPAB ties the term Welsh slate to north-west Wales, and records that the quarries at Bethesda and Blaenau Ffestiniog are still at work. That is a statement about origin, and it is the first thing to hold on to when someone offers a pile of reclaimed slate for sale.
Reclaimed Welsh slate is the second-hand form: slates stripped from an earlier roof, knocked clean, sorted and sold again. The word Welsh on the pile is the seller's description, and it is worth testing. An even roof needs even slates, and a mixed heap of unknown history leaves the roofer a great deal of sorting to do before a single course is laid.
Questions worth putting to a supplier before anything is ordered:
- where the slates came from, and which roof, if the seller knows
- whether they are graded into sizes or sold as a mixed lot
- how many extra there are beyond the count the slope needs
- how they have been stored since they came off
- whether they can be handled and tapped before they are paid for
Slate that has been kept dry and stacked on edge tells a better story than slate that has sat in a yard, and a seller who can say where it was lifted from is easier to trust than one who cannot. The quarries themselves are covered in our short answer on where Welsh slate comes from, and the choice between Welsh and Spanish slate is a separate decision from the choice between new and reclaimed.
Lifespan: the published figures and their limits
Published lifespans for slate are typical ranges, never promises, and each carries its own hedge. HomeBuilding's cost guide, last updated on 30 September 2025, gives an approximate lifespan for each kind of slate:
| Slate | Lifespan (approx) |
|---|---|
| Welsh slate | 100+ years |
| Spanish natural slate | 75 to 100 years |
| Reclaimed Welsh slate | 50 to 80 years |
A well-slated roof, SPAB adds, is "likely to be more than 100 years". The word well-slated carries the weight. A slate roof reaches those ages when slates, fixings and battens are all sound together, and nails and battens run to their own timetables, so a long-lived slate sitting on tired battens does not make a long-lived roof.
Reading the table, reclaimed Welsh slate is given a shorter range than new Welsh slate, as you would expect from a slate that has already spent years on another roof. The figure for any one batch depends on what the earlier roof was, how the slates came off and how well they were kept since. That is why a batch is checked slate by slate, as the pitfalls section sets out, rather than bought on the strength of a range printed in a table.
None of this makes reclaimed slate a poor choice. A roof that is mended to last another few decades does not need slate that will outlast the century, and a good reclaimed batch fits that job well.
Where reclaimed slate earns its place
Reclaimed slate earns its place where the roof around it is already Welsh slate. A slipped or broken run on an older elevation, a patch near the ridge, a rebuilt gable end or a small extension that joins an old slope can all be filled with slates of a weathered colour and a similar thickness. Seen from the road, the new work then reads as part of the old roof. Our guide to repairing a slate roof covers the repair side of that.
It can also suit a re-slate where the owner wants the old appearance kept. The slates stripped from the roof itself are sorted and relaid, and reclaimed slates make up any shortfall. The supply is whatever has come off other roofs, so sizes and quantities change from batch to batch, and reclaimed is not automatically the cheaper choice.
For scale on new slate, HomeBuilding gives supply-only prices of £185 per m² for Welsh slate and £72 per m² for Spanish slate. It also puts a Welsh slate roof on a 65 m² semi at a figure that "might reach £18,000", against £10,000 to £15,000 in plain concrete tiles. MyJobQuote's 2026 average for fitting a slate roof is around £7,800.
Those are third-party figures for new slate and typical UK jobs, so they frame the question without answering it for your house. After the survey, the written price names the slates to be used and where they came from, so the choice is on paper before it is on the roof.
Pitfalls to check before a slate goes on
Old slates arrive with their history on them, and some of it is a problem. Looking over a batch slate by slate costs an hour. Finding the faults after the slates are fixed costs a scaffold. A sound slate gives a clear ring when tapped lightly, and a dull note can point to a crack you cannot see.
What we check on a batch, laid out in daylight:
- hairline cracks, found by the tap test and by holding the slate up to the light
- flaking or layering at the edges, where the slate splits into thin sheets (delamination)
- old nail holes that are enlarged, or that sit in the wrong place once the slate is cut down
- uneven thickness within a size, which tilts a course and lets a gap open
- chipped corners and damaged faces left by stripping
Sorting matters as much as soundness. Slates of one length laid together keep the overlap even across a course, and a batch bought with no spares leaves nothing for the next repair. When a batch fails these checks we show you the slates that failed, because patching a good roof with poor slates is worse than leaving the gap open for a better batch.
Reclaimed stock needs sound fixings behind it too. New nails and sound battens go under old slates, and where the old holes are in the wrong place, the slate is re-holed or set aside.
Pitch, headlap and fixings with old slates
Reclaimed slates are fixed the way new ones are, and the rules do not relax because the slate is old. Cupa, a slate maker, reads BS 5534:2014+A2:2018 as setting 20 degrees as the smallest slope for a natural slate roof, on three conditions: moderate exposure, a 500mm slate and a 115mm overlap. Those conditions travel together, and each one is part of the figure. Cupa separately advises that hooks should not go on any pitch below 25 degrees.
Two points follow for reclaimed stock. First, a slate with nail holes already in it is nailed, and the holes have to land where the lap and the new fixing need them. Second, a slate cut down to fit a course is a shorter slate, so the pitch and overlap figures for the original length no longer apply as quoted. The cut, the batten spacing and the pitch are worked out together, with the data sheet open on the roof.
Where the pitch rules out hooks, nails are the fixing, and nailing is also the long-established method on slate. Our guide to slate pitch and headlap works through the arithmetic with the Cupa example, one condition at a time.
Battens and underlay under the old covering are checked while the slope is open. Reclaimed slate laid over tired timber only moves the repair bill forward, and a second visit with a scaffold costs more than a first look.
Re-slating with reclaimed slate: approval by country
Laying reclaimed Welsh slate on a roof that was Welsh slate leaves the weight and the look of the roof much as they were. Whether approval is needed still turns on the country the house stands in, and on the share of the roof being re-covered:
- In England, the Planning Portal says no Building Regulations application is normally needed where "Less than 25 per cent of the total 'building envelope'" and "Less than 50 per cent of the roof" is affected.
- In England, the Planning Portal also treats a covering that adds weight "by 15 per cent or more" as needing approval.
- In Wales, the Welsh Government says of re-roofing: "In most situations, this work will need Building Regulations approval."
- In Wales, the Welsh Government's example is slate re-covered in tiles, where Building Regulations approval is likely to be needed.
Reclaimed slate over a covering of similar weight leaves little to weigh. Slate laid where a lighter or heavier covering stood is a question for a structural check, in either country.
Listed status adds consent of its own: section 7 of the Planning (Listed Buildings and Conservation Areas) Act 1990 in England, and sections 88 and 89 of the Historic Environment (Wales) Act 2023 in Wales.
Conservation areas are a council question too. Herefordshire has 64 of them, and for an address in or near one we ask the council whether an Article 4 direction applies before a slate is chosen or a scaffold is booked.
Before a re-slate of any size starts, we put the plan to building control for the address, either the council or a registered building control approver. Our re-slating guide describes the stripping and relaying step by step.
