In brief
Yes, with conditions. A slate is stone, and the cold does it no harm. What stops the job is ice on the slope and the scaffold, which makes the roof unsafe to stand on, and fresh mortar that freezes before it sets and crumbles. So the nailing of slates goes ahead once the roof is clear and dry, while ridge bedding and verge pointing wait for a spell when the mortar can set. A stripped slope is covered every evening.
Why frost stops the work before it stops the slate
A sound slate is a hard, dense stone, and a frosty night does not spoil it. The trouble on a frosty morning is underfoot. Hoar frost and ice on slate are slippery, and the ladders and scaffold boards that give access ice over as well. A roofer who cannot trust his footing should not be on the slope, and we do not ask him to be.
The second problem is wet mortar. Ridge tiles are bedded in it, verges are pointed with it, and slates at a hip may be bedded as well. Mortar that freezes before it has set can crumble, and a ridge bedded in that state will need doing again. This is why mortar work has its own rules on a cold day.
A third problem is a cracked slate. Water that gets into a hairline crack and freezes can widen it. That does not mean new slates are at risk in the cold. It means a slate that was already cracked before we started may show it first after a hard night, which is another reason to look at each slate as it goes on.
What goes ahead on a cold day and what waits
Cold alone may not cancel a day. The slope and the mortar decide, and the stages of a re-slate react to them differently.
| Stage | On a frosty day |
|---|---|
| Stripping the old slates | Waits until the ice is off the slope and the boards |
| Laying underlay and battens | Goes ahead once the surface is dry and clear |
| Nailing the new slates | Goes ahead on a dry slope with safe footing |
| Bedding ridge and pointing verges | Held for a day that stays above freezing |
The same logic applies to a repair. Refixing a single slipped slate suits a clear morning, and the job takes no mortar. A cracked ridge tile bedded in mortar is another matter, and if the weather is against it the gap is made weathertight with a temporary cover first and bedded properly later. That keeps rain out without risking a ridge that fails in the spring.
Nothing here is a promise about dates, because the forecast changes. What we can promise is that we will not lay mortar into a frost to keep to a diary.
How a winter re-slate is planned
The risk of a winter job is an open roof, so the plan is built around never leaving one. We strip a slope in sections small enough to be closed up before dark, and whatever is open at the end of the afternoon is covered with underlay or sheeting before we leave. Battens are checked as they are exposed, because winter weather can show up rot and nail sickness that a dry August would have hidden.
The start date goes in the written quote as a window, with the price as one total, since the weather has the last word on any single morning. A new slope cannot be dated like a delivery.
Whether a re-slate needs sign-off is a separate question, and the two countries answer it differently:
- England: the Planning Portal's guidance is that a re-roof normally escapes an application when less than 25 per cent of the building envelope and less than 50 per cent of the roof is involved.
- Wales: the Welsh Government's re-roofing page expects Building Regulations approval in most situations, so check with the council's building control team before you book a start.
A frosty month is a poor time to learn which of those applies, so ask early.
Checking your own roof after a hard frost
A frosty spell is a fair moment to inspect the roof from the street, because damage shows up quickly after it. Stand clear of the building, use binoculars or your phone camera, and never go up a ladder onto the slope to see for yourself.
Things worth photographing:
- slates that sit proud of their neighbours, or have dropped a few centimetres
- slates with flakes or layers peeling at the tail, which our page on why slates flake explains
- fragments of slate lying on the drive, in the gutter or on a lower roof
- a ridge line that is no longer straight
Send the pictures through the quote form or WhatsApp. A single slipped slate is a small repair to a slate roof. A scatter of them across a slope may point to re-slating instead. We tell you which, and on the survey we take our own photographs of the roof, so the decision rests on evidence. A scatter this wide is a pattern, not bad luck. The whole subject sits under slate roofing.
