Re-roofing a house in Wales sounds like one job, but three separate questions sit inside it. Does the work need Building Regulations approval? Does the new covering need to look like the old one for planning purposes? And how much insulation must the finished roof carry? For the Monmouthshire and Powys towns, and everything inside the Bannau Brycheiniog National Park, each of those questions has its own Welsh answer.
The English tests do not carry across. A Welsh address does not use the Planning Portal's envelope test, England's insulation tables or England's wording on permitted development. It uses the Welsh Government's guidance, the Welsh Approved Documents and the 1995 permitted development order as it stands in Wales.
We survey the roof first, photograph what we find and send a written price for the whole job. The sections below follow the order in which the Welsh questions arise: approval, a change of material, planning, insulation, who checks the work, and what moves the price. For the wider picture of replacing a roof, start at roof replacement.
What the Welsh Government says about approval
The gov.wales re-roofing page begins with a plain sentence: "After a period of time the roof on existing buildings may need to be replaced. In most situations, this work will need Building Regulations approval." That is the starting point for a Welsh house. We do not begin from an assumption that approval is not needed.
A second Welsh Government page, on works to an existing roof, sets a test based on area. On that page the Welsh Government treats work on "less than 25 per cent of the area of a pitch or flat roof" as not normally needing an application to building control. The page names the cases where approval is needed:
- structural alterations to the roof
- a new covering that would behave differently in a fire
- replacing or repairing "more than 25 per cent of the roof area", which the Welsh Government links to improving the roof insulation
On the thermal side, the Welsh Government says that re-covering a roof should also include better insulation, since the regulations treat a roof as a thermal element (that term covers walls, floors and roofs, but not windows or rooflights). For a flat roof with integral insulation, it says replacement may mean upgrading that element.
A slipped slate or a patch of new battens is a repair. A whole slope stripped and re-covered is not. Because the two pages read differently, we treat a re-cover as a job for building control and ask the council's building control service or a registered building control approver before we start, instead of measuring a slope and hoping.
The Welsh Government also says new building regulations come into force on 1 July 2026, replacing the deposit of plans with applications for building control on work that is not higher-risk. Ask building control which route applies to your address.
Slate to tiles and other changes of covering
Changing material is where a Welsh re-roof needs a closer look. The Welsh Government's wording is specific: "If the existing roof covering is to be replaced with a different material to its original for example, slate to tiles, then approval under the Building Regulations is likely to be needed". It gives three reasons, and each matters on a real roof:
- structural stability, where the replacement tile is significantly heavier or lighter than the existing covering
- fire safety
- energy efficiency
Weight is the structural one. Welsh Approved Document A, in paragraph 4.4, says "A significant change in roof loading is when the loading upon the roof is increased by more than 15%." A new tile on rafters that carried slate for a century is the case to check. Building control checks rafters, purlins and wall plates, and we record what we find in the survey so the figures are not guesses.
Our guide to swapping slate for tiles in Wales takes this question on its own. For now, note that a different covering raises two questions at once: approval under the Building Regulations, and whether it matches the old roof for planning purposes.
Pitch matters too. Cupa says BS 5534:2014+A2:2018 "also indicates that the minimum roof pitch for natural slate is 20 degrees" in moderate exposure with a 500mm slate and a 115mm overlap, and Marley's product table gives a minimum pitch for each tile. A new covering must suit the slope it is going on.
Planning and matching materials in Wales
The Welsh Government's planning page says: "You do not normally need to apply for planning permission to re-roof your house or to insert roof lights or skylights." The condition attached to that is the one that catches people. Under the General Permitted Development Order 1995 as it applies in Wales, Class C condition C.2(a) requires that "the appearance of the materials used in each element of any exterior work must so far as practicable match the appearance of the materials used in the equivalent element of the existing dwellinghouse".
Put plainly, a like-for-like look keeps a Welsh re-roof inside permitted development, and a covering with a different look does not. Matching is judged on appearance, so ask the council before you order tiles that differ from the old ones. Inside the National Park, put the question to the National Park Authority.
Three further Welsh points apply to houses in sensitive places:
- Roof lights fall outside permitted development on article 1(5) land, which means conservation areas, National Parks and areas of outstanding natural beauty (National Landscapes), or in a World Heritage Site (Class C.1(d)). They need planning permission there.
- Dormers are not permitted development on that land either (Class B.1(g)).
- For a listed house, Classes B and C stay available but listed building consent is also required under sections 88 and 89 of the Historic Environment (Wales) Act 2023, in force since 4 November 2024.
An Article 4 direction can also remove permitted development rights, and the Welsh Government says these are most common in conservation areas. Ask your council whether one applies. Our answer on changing a roof covering in Wales goes through the matching test.
U-values: 0.13, 0.16 and 0.35 explained
A U-value says how quickly heat escapes through a roof, and the lower the number, the better the insulation. It is written in watts per square metre per kelvin, W/m²K. The Welsh Approved Document L, volume 1, is the "2022 edition incorporating 2024 amendments", and its successor takes effect on 4 March 2027 for use in Wales. The figures below come from the current edition.
| Situation | Table | Figure |
|---|---|---|
| New roof structure on an existing house | 4.1 | 0.13 W/m²K |
| A retained roof being renovated | 11.1, column (a) | 0.16 W/m²K |
| Worst acceptable figure where 0.16 is not feasible | 11.1, column (b) | 0.35 W/m²K |
| Roof windows | 4.1 | 1.4, or WER Band B |
| Rooflights | 4.1 | 2.2 W/m²K |
Two features of Table 11.1 differ from the English approach. In Wales, 0.35 is the worst acceptable figure and not a trigger. And under paragraph 11.14 the whole element should be improved "provided the area to be renovated is greater than 50% of the surface of the individual thermal element". Paragraph 11.16 counts replacing "the waterproof membrane of a flat roof" as renovation.
If 0.16 "is not economically, functionally or technically feasible", paragraphs 11.20 and 11.21 ask for the best standard that is feasible, generally not worse than 0.35, with an economic test of "a payback of the initial cost within 15 years through energy savings". Which table fits your roof depends on whether the structure is new or retained, and building control decides. Our guide to the replacement roof U-value in Wales sets out each figure.
Who checks the work in Wales
Building control in Wales is done by the council or by a registered building control approver. Both routes are real choices, and the difference matters if you are planning ahead.
- On the council route, you deal with the building control service of the council that covers the address. For Powys addresses we say it is the council's building control service or a registered building control approver, and we confirm the route with you at the survey.
- On the private route, the approver must be registered. The Welsh Government says the Building Safety Regulator "serves as the main regulatory body for the building control profession in Wales, operating on behalf of the Welsh Ministers".
- The same page adds that the Regulator does not regulate local authority building control in Wales, and that the Welsh Ministers regulate the councils.
In the Bannau Brycheiniog National Park, the Park Authority takes planning matters while the council keeps building control. The two are separate conversations, and we keep them separate.
What we bring to either route is the evidence. We photograph the existing roof, record the rafter sizes and spacing where the loft allows, note the covering, and describe the proposed one. The written price says whether the scaffold is included, and when you compare quotes, check whether VAT is included in each. If an application is needed, we agree with you what goes in it before the scaffold goes up, so work does not stop part-way through for want of a decision.
What moves the price of a Welsh re-roof
The factors below are what move the figure on your written price. Third-party ranges help you judge whether a figure sits in a sensible band, and each is dated and named here.
- the covering chosen, and the slope's size and pitch
- whether the rafters, battens or wall plate need work
- whether the insulation figures above call for new insulation at the same time
- chimneys, valleys and lead flashings on the roof
- access, scaffold and the removal of the old covering
On a typical three-bedroom house, Which? (November 2025 survey, ex VAT) quotes "£7,000-£21,000" for a whole new roof on an average three-bedroom house. HomeBuilding (30 September 2025) says a standard three-bedroom semi with a 65m2 roof and plain concrete tiles may cost between £10,000 and £15,000, and that a Welsh slate roof for the same property "might reach £18,000". MyJobQuote's average for a new roof is around £5,250. The sources differ widely, which is itself a reason to ask for the scope in writing.
On slate, HomeBuilding gives Welsh slate "100+ years", and SPAB says the life of a well-slated roof is "likely to be more than 100 years". Treat both as typical ranges, never a promise of life.
The border adds one point to the price conversation. If the approval route changes the plan, for example after a covering is swapped, the price changes with it. We re-issue the written total at that point instead of adding extras later.
