01432 610152 Get a quote Call 01432 610152

Re-covering in Wales

Can I change my roof covering in Wales without planning?

A Welsh house can take a new covering with no planning application, if the roof keeps its look. Building Regulations are a separate test with its own answer.

In brief

Normally, yes. The Welsh Government's householder guidance says a planning application is not normally needed to re-roof a house. The condition is appearance: the Welsh permitted development order expects the new materials to echo the existing ones in look, so far as practicable. A visibly different covering, a roof light on protected land or a listed house changes the answer. Building Regulations approval is a different question, and in most situations it applies.

Why matching the old covering is normally permitted

Planning law lets a householder carry out some work without applying at all. In Wales the source is the General Permitted Development Order 1995, still the working order there, as amended for Wales. Part 1 Class C deals with other alterations to a dwellinghouse roof, and stripping a roof to lay a new covering is an alteration of exactly that kind.

Class C comes with limits, and a plain re-cover sits comfortably inside both:

  • the work must not stick out more than 15 centimetres beyond the plane of the original slope (C.1(a))
  • the work may not leave any part standing higher than the top of the original roof (C.1(b))

A new covering of similar thickness lies at the old level. Work that adds height or bulk is a different matter, which is why we measure the existing build-up from the loft and the eaves before suggesting any covering, and photograph it for you. Householder rights belong to houses, so a flat in a converted building is judged on its own terms and should be raised with the council first.

When the matching condition applies

Class C.2(a) attaches a condition to everything done under the class. Where practicable, each element of exterior work has to resemble, in appearance, the matching element already on the house. A roof covering is exterior work, so the finished roof should read like the old one when seen from the road. Where a house stands in a row, the neighbours' roofs set the visual context too.

The common cases, set side by side:

Re-covering in Wales and the matching condition
ChangePosition
Slate renewed in slate of like colourWithin Class C
Natural slate replaced by tileLook differs: ask the council
Stack replaced or alteredOutside Class C
Roof light on protected landNot permitted

Colour, texture, profile and size all count as appearance. Where a change of material is on the table, put it to the council before anything is ordered. Inside Bannau Brycheiniog, check with the National Park Authority, which acts as the planning authority there. Our page on swapping slate for tiles in Wales takes that case further.

Land and buildings where more is needed

The Order puts its tighter rules on article 1(5) land, which means a National Park, an area of outstanding natural beauty (now styled a National Landscape) or a conservation area. A World Heritage Site gets the same treatment. On that land, Class C is silent on two things:

  • a roof light set into a roof slope (C.1(d)), which it excludes
  • taking a chimney off the house, which it also excludes

Dormer windows are also barred there, under Class B (B.1(g)).

A listed house keeps its Class B and C rights, yet it also needs listed building consent. Since 4 November 2024 that has come from the Historic Environment (Wales) Act 2023, sections 88 and 89. An Article 4 direction can remove rights as well, so put one question to the council: does a direction cover the road the house stands on? Do it before you assume anything about your own rights.

On whether you need planning permission in Monmouthshire, the county council gives its Duty Planning Officer, on 01633 644831. In Powys, ask the county planning team. Within the National Park, the Park Authority decides.

Building Regulations are a separate test

Being permitted development settles planning and nothing else. On Building Regulations the Welsh Government's re-roofing page opens with "In most situations, this work will need Building Regulations approval." Switching to a different material is flagged as likely to need approval, and slate to tiles is the example it gives. The weight on the roof changes, and so can its fire and energy performance.

Energy is the part that gets missed. Roofs fall in the thermal element category, so a re-cover is the moment to improve the insulation. The Welsh Approved Document L sets the aim for a renovated roof at 0.16 W/m²K, and no worse than 0.35 W/m²K where 0.16 cannot be reached.

Approval comes through the council's building control service or a registered building control approver. We find out which applies, and tell you where your roof stands on both planning and approval before any work is booked. If either answer is unclear, we put the question to the council by email, so the answer is on paper before the first tile moves. Related pages: re-roofing a house in Wales, heavier coverings and roof replacement.

Related questions

Does the new roof have to be the same colour as the old?

Colour is part of a roof's appearance, and the Welsh order asks for a match so far as practicable. A near match in the same material is the easy case. If colour or material would look clearly different, ask the council before ordering, and, for a house inside the Park, ask the National Park Authority as well.

Can I add a roof light while the roof is open?

Not as permitted development on protected land: conservation areas, National Parks and National Landscapes are excluded under Class C.1(d). Elsewhere it can fall under Class C. Separately, the Welsh Government's rooflight page expects new rooflights to need Building Regulations approval in general, so that question stays open on any land.

Get your free roof quote

Tell us about the roof and we will arrange a survey.

10-year workmanship guarantee, in writing