01432 610152 Get a quote Call 01432 610152

Double Roman tiles

What are double roman tiles?

A Double Roman is an interlocking concrete tile whose profile has two raised rolls. It laps its neighbours at the sides, so a roof of them looks ribbed.

In brief

Double Roman is a type of interlocking concrete roof tile, named for the two broad rolls across its face. Each tile locks into the one beside it, so the roof is laid in straight rows with a ribbed look. Marley lists a minimum pitch of 22.5 degrees for its smooth Double Roman, and HomeBuilding gives Double Roman a lifespan of 40 to 50 years. A cracked one can be swapped for a matching tile, but matching means a sample in the hand, not the name alone.

What the name describes

The name describes the shape. Seen end-on, the tile rises into two rounded rolls with a shallow channel between them, a profile that echoes the Roman pantile of southern Europe while being made from concrete. Rain runs down the channels and off the bottom edge, and the sideways joint lets one tile overlap the next without a gap.

Interlocking tiles are far bigger than the old plain tile, so a roof of them needs many fewer pieces to cover the same slope. That also means the battens, the horizontal timber laths under the covering, are set out to suit the tile, so the tile never has to be bent to suit the battens. A roof laid this way goes down quickly and reads as a pattern of long vertical ribs from the street.

Double Roman is a product line, not a regional style. Marley lists it among its concrete tiles, and other makers have made tiles with a similar profile, so two roofs both called Double Roman can still differ in size, thickness and finish. Our guide to concrete interlocking tiles covers the family as a whole.

The pitch a Double Roman needs

Pitch means the angle of the roof, counted in degrees up from level. Every tile has a lowest angle at which rain still sheds properly, because below it, wind can drive water back up the laps. Marley's product table gives the minimum for its Double Roman as 22.5 degrees for the smooth finish, and tells you to read the data sheet of the exact tile on your roof.

Here is how that sits beside a few other tiles in the same Marley table.

Marley's published minimum pitches for some concrete tiles
TileMinimum pitch
Mendip15 degrees
Double Roman22.5 degrees
Anglia25 degrees
Plain35 degrees

A Double Roman is therefore not the tile for a very flat roof, and it is not a steep-roof tile either. We measure the slope on site with a digital level, because a drawing or a guess is no substitute, and a roof that has sagged over the years can read lower at one end than the other. For the wider picture across tiles and slates, see roof pitch limits for tiles and slates.

Lifespan and the published repair rate

Two published sources differ on how long concrete tiles last, so both are named here. Marley expects its roof tiles to reach around 60 years, and it is plain that this is a forecast and not a guarantee. HomeBuilding gives Double Roman tiles 40 to 50 years. Both are typical ranges, and a roof in a sheltered garden and one on an open hillside may not age at the same pace. The gap between the two is wide enough that neither is a promise to you.

For repair work, Checkatrade's June 2026 guide puts concrete tile repairs at £90 to £120 per m², excluding VAT, on patches of up to 3 m². The unit is the square metre, and no roof total is worked out from it here.

Your price arrives as one written figure after the survey, with scaffold, new tiles and clearance of the waste all inside it. The photographs from the survey show which tiles are cracked, which have slipped on tired fixings and which are only dirty, and that decides how much of the slope is touched.

Replacing one, matching one and the rules

A cracked Double Roman can be taken out and a matching tile set in its place. The match is checked against a tile in the hand, since profile, size and colour all count, and an older tile has weathered to a different shade from a new one. Where the exact tile is no longer made, we tell you, and mixing old and new roof tiles explains the options.

Changing the whole covering brings a different set of rules in England and in Wales, in different ways:

  • On the English side, the Planning Portal puts the line at a covering that is 15 per cent or more heavier, and that needs Building Regulations approval; Approved Document A speaks of roof loading rising by more than 15%.
  • On the Welsh side, gov.wales takes a slate roof re-covered in tiles as its example, and says approval is likely because the new tile may be significantly heavier.

Before a slate roof is re-covered in Double Roman, we compare old and new weights and check the structure. See also the main pitched roofing page.

Related questions

Can I swap Double Roman tiles for plain tiles?

Only as a whole-roof decision. In Marley's table the plain concrete tile has a minimum pitch of 35 degrees against 22.5 for Double Roman, so a shallow roof may not suit it, and plain tiles change the weight and the look. A mixed slope of two types will not lie properly, and we would not offer it.

Are Double Roman tiles still made?

Marley's table lists the tile, so at least one maker has it in its range. Whether a particular older tile can be matched exactly is a different question, and the answer comes from a sample held against current stock. That is why we take a loose tile or a clear photograph of the broken one to the supplier.

Get your free roof quote

Tell us about the roof and we will arrange a survey.

10-year workmanship guarantee, in writing