In brief
No, the tiles themselves are not held by mortar. A dry ridge fixes each ridge tile with clips, screws or brackets to a batten, the timber strip along the apex. Dry-fix systems have their own standard, BS 8612. Some makers add a finishing detail at the ends or against a wall, so we follow the instructions for the system on your roof and tell you what they call for before work starts.
What holds the tiles on a dry ridge
The apex is the top line of the house, the seam between the two slopes, and ridge tiles cap it. On an older roof those tiles sit in a bed of mortar laid along the top. On a dry ridge, a batten is fixed along the apex and the ridge tiles are held to it by clips, screws or brackets. The fixing is metal into timber, so there is no mortar to cure, shrink or crumble away in a few winters.
Some dry systems carry a ventilated strip under the tiles, which lets air move through the top of the loft. That suits a cold roof, where the loft is ventilated on purpose, and our page on eaves ventilation for a cold roof explains the airflow that goes with it.
When we survey a ridge from the ladder, we check and photograph:
- whether the tiles are bedded in mortar or clipped to a batten
- gaps, cracks or missing pieces along the bedding
- any ridge tile that rocks when pressed by hand
- how the ridge ends at a gable, a hip or a chimney
Those photographs show you the ridge as it stands today.
Bedded ridge and clipped ridge compared
Both types close the top of the roof against rain and wind. They hold the tiles in different ways, and that changes what goes wrong and how it is put right.
| Question | Mortar bedded | Dry fixed |
|---|---|---|
| What holds the tile | A bed of mortar | Clip, screw or bracket |
| How it fails | Cracks, then falls out | Fixing loosens or corrodes |
| Airflow | None built in | A ventilated strip in some systems |
| Usual repair | Rebed the tiles | Refix or replace a clip |
A mortar ridge is not a faulty ridge. Some roofs were built that way, and rebedding is a sound repair when the tiles are good and the fixings are added. The choice between the two follows the house. Two things settle it: whether the tiles are whole, and whether the batten and rafters under them are sound. We look at both before we decide, and we photograph what we see.
On a hipped roof the same question arises along each hip, where the tiles run down the slope and every one needs a fixing of its own. We check those lines at the same visit as the main ridge.
Where the standards leave mortar
BS 5534:2014+A2:2018 remains the current edition for slating and tiling work, and BS 8612 is the specification written for dry-fixed ridge, hip and verge systems. Marley points out that the 2015 amendments to BS 5534 ended the habit of trusting a mortar bed alone to hold the covering on. Mortar stays permitted. What changed is that it may not stand alone, so a metal fixing goes in with any bed.
Marley also states that installing to BS 5534 isn't required by law. The standard records good fixing practice, and we follow that practice on a ridge however the ridge is made.
With a mortar ridge that has lost pieces, you have two sound options. One is a dry ridge. The other is a rebed with mechanical fixings added. Both close the gap, and both leave you with tiles that are held down by more than a crumbling bed. Our page on ridge tile rebedding sets out how the second one is done. Our longer guide on what BS 5534 means for your tiles takes the standard further.
Price, appearance and the two sets of rules
Third-party prices for ridge work cover a wide spread. Which? gives £80 to £300 to fit one new ridge tile, from its November 2025 survey, excluding VAT. MyJobQuote gives an average of £225 to £550 for ridge tile replacement, on a page dated 01/10/26. Checkatrade, in June 2026 and excluding VAT, puts ridge tile repairs at £50 to £70 per metre. These are survey averages from other sources, not an offer for your house. Length, access and the tile all move the figure, and our written total follows the survey.
A dry ridge can look slightly different from a bedded one, because the tiles sit on clips and not on a line of mortar. The planning orders deal with that look differently:
- In England, Class C of the 2015 GPDO takes in re-covering, with no rule about matching the old materials.
- In Wales, GPDO 1995 Class C.2(a) asks for new materials that match the look of the old wherever that can be done.
If the house is listed, or stands within a conservation area, put the question to the council before the ridge changes appearance. The pitched roofing hub covers every other part of a tiled roof.
