01432 610152 Get a quote Call 01432 610152

Code 8 uses

Where is code 8 lead used?

In the Royston Lead table Code 8 is the heaviest sheet, and it is listed for valley and box gutters, parapets and dormers, and never for flashings.

In brief

Code 8 is the thickest lead in the Royston Lead table: orange, 3.55 mm and 40.26 kg/m2. The table lists it for pitched valley gutters, for the larger parapet and box gutters with their tapered valleys, and for dormers. It is not listed for flashings or soakers, which sit in the lighter codes. A house that needs lead of this weight is one with a gutter or a dormer large enough to justify it, and the survey decides.

Code 8 in the Royston Lead table

The table runs from Code 3 to Code 8, and Code 8 is the last line. It is the heaviest and the thickest, and it carries the colour orange.

Code 8 lead in the Royston Lead table
PropertyCode 8
ColourOrange
Thickness3.55 mm
Weight40.26 kg/m2
Listed usesPitched valleys, box gutters with tapered valleys, parapets, dormers

To set 40.26 kg/m2 in context, the lightest code, green Code 3, weighs 14.97 kg/m2. White Code 7, one step below, is 3.15 mm and 35.72 kg/m2 and has the same three uses listed. So Code 7 and Code 8 form a pair at the heavy end, and the table does not tell you which of the two a gutter wants. That depends on the gutter, which is why it is looked at on the roof and not read off a chart.

One thing the table does make clear is the range. Between the lightest line and the heaviest, the weight per square metre more than doubles, so the codes are not interchangeable. Moving up a code on a long gutter adds a real load to the boards beneath, and the order of the codes is not an order of quality, only of thickness.

The three jobs it is listed for

Each of the uses has its own letter in the brochure, and each is a place where lead does more than cover a joint.

  • Pitched valley gutters: a lead-lined channel where two sloping roofs meet. Rain from both slopes runs into it, so it is a working channel and not just a seal. The page on lead valley gutters covers the boards, laps and fillets.
  • Parapet and box gutters: flat-bottomed channels behind a parapet wall or between roofs, with tapered valleys where they meet a slope. These are the larger gutters, described in parapet and box gutters in lead.
  • Dormers: the cheeks, roof and flashings of a dormer window, covered in leadwork on dormers.

All three are gutters or surfaces that hold or carry water, not just a strip turned over a joint. A gutter that sits in a roof and has to take everything that falls on the slopes either side is where a heavier sheet is listed. Whether yours needs Code 7 or Code 8, or a lighter code the table also lists, comes from its length, its fall and the structure under it.

What Code 8 is not listed for

Flashings and soakers do not carry Code 8, and neither do the lighter parts of a roof. Soakers are listed under Code 3 and Code 4 only. Flashings are listed under Codes 4, 5 and 6. A quote that proposes the heaviest lead for a chimney flashing, then, is going beyond the table, and that deserves a question about why.

The reason is practical. A flashing has to be pushed into a cut joint and dressed to a stepped line. A sheet as thick as Code 8 can be hard to work into tight folds, and its weight adds nothing to the job of sealing a wall joint. For the codes that suit a flashing, the separate page on lead codes for flashings has the rest of the table.

Heavy lead is also a matter of the roof beneath. A gutter lined in 40.26 kg/m2 sheet puts real weight on its boards and bearers, and we look at the timber under the lead before we propose the code. Old boards that have been wet for years are better replaced than covered. The lead roofing hub explains where each part of the leadwork sits.

Weight, listed roofs and the written price

Heavier sheet costs more to buy and more to carry up a ladder or a scaffold, and a long gutter in Code 8 is a different job from a short dormer top. A scaffold that takes up part of the road or footway needs a licence, and we arrange the licence with our scaffolder:

  • In England, Shropshire Council charges £200 for a scaffold licence, with at least ten working days' notice.
  • In Wales, Monmouthshire County Council's licence is an administration fee of £108, plus £27 per week to extend.

On a listed building in England, the Planning (Listed Buildings and Conservation Areas) Act 1990 section 7 requires consent for any works that would affect character, so altering the lead on a historic gutter goes to the council first. The same applies in Wales under the 2023 Act, and we ask before anything is ordered.

The price we give is a single written figure, with scaffold counted in, fixed once we have surveyed the roof. Before you set quotes side by side, see that each names the lead code for each gutter, not only the word lead, and says whether VAT is included.

Related questions

Is Code 8 too heavy for a house roof?

The table lists it for house-sized jobs such as valley gutters and dormers, and no weight limit is given. What matters is the timber beneath, so we look at the boards and bearers first and propose the code once we have seen what they will carry.

Can Code 8 be used for a chimney flashing?

In the Royston Lead brochure it is absent from the flashing line, which names Codes 4, 5 and 6. A sheet this thick is awkward to dress into a stepped line, so a firm proposing it for a flashing should be asked to explain the choice.

Get your free roof quote

Tell us about the roof and we will arrange a survey.

10-year workmanship guarantee, in writing