01432 610152 Get a quote Call 01432 610152

Lead flashing per metre

What does lead flashing cost per metre?

Checkatrade puts lead flashing repairs at £50 to £70 per metre, excluding VAT, in its June 2026 repair guide.

In brief

Checkatrade's repair guide (June 2026) puts lead flashing repairs at £50 to £70 per metre, excluding VAT. That is a third-party UK rate for repairs, not our price and not a total for a roof. What a flashing job costs depends on the length, the code of lead, how the roof is reached and the condition of the chase. Our figure is a single total, given once the lead has been surveyed.

The per metre rate and what it covers

Checkatrade's repair guide, last updated June 2026, lists lead flashing repairs at £50 to £70 per metre, and its £50 to £70 is exclusive of VAT, which has to be added. The same guide gives ridge repairs the same rate per metre.

Read the unit. This is a rate for repair work per metre of flashing, and a repair is not the same job as fitting a new run of flashing round a chimney or along a wall. A rate for one is not a rate for the other, and the guide does not say it is.

Two further points stop the figure being used as a calculator. It is a typical UK figure, not a price for Herefordshire or for any one street. And a per metre rate does not tell you how many metres of flashing your roof has, or how many of them are damaged. We measure the lead on the survey and photograph it, so the total is built from your own roof and not from a sum done at a desk.

Our page on lead flashing repair cost covers the repair side of the price in more detail.

Whole-job figures from MyJobQuote

A per metre rate is one way to look at lead cost. MyJobQuote gives whole-job figures for chimney flashings in its leadwork guide, last updated 22/09/26. The guide does not say whether VAT is included, so neither do we.

MyJobQuote figures for chimney lead flashing
JobFigure
Patch repairAround £200
Full replacementAround £570 on average
Full leadworkBetween £350 and £920

MyJobQuote adds that the full leadwork range is wide mainly because of scaffolding, and the narrow patch figure shows how much the size of the job matters as well. A chimney with a full set of flashings is a different job from a patch to one stretch of step flashing, and the two figures reflect that. Each answers its own question about lead cost.

The per metre rate and the whole-job figures come from different sources and measure different things. They are two views of lead cost, and neither is meant to be added to the other. A patch priced per metre and a whole set priced as a job answer different questions, so the quote you hold is the only one that applies to your roof. Our page on whether chimney leadwork needs scaffolding explains how access is decided.

What moves a flashing price

The same length of flashing can cost differently on two roofs. These are the points that set the price:

  • the code of lead: a heavier code means more metal per square metre, from 20.41 kg for Code 4 to 25.40 kg for Code 5 and 30.05 kg for Code 6 in Royston's table
  • the number of folds and steps: a stepped flashing up a pitched side takes more cutting than a straight run
  • how the roof is reached, including whether a scaffold goes up
  • the chase: sound brickwork is quicker to wedge and point than crumbling joints
  • how much old lead has to come off before the new goes on

Chimneys, dormers and wall junctions each bring their own mix of those points. A straight run along a low wall is a different job from a four-sided stack at the top of a tall roof, even if the number of metres is similar.

Our page on the lead code for flashings shows how the code is chosen, and the weights come from Royston Lead's published table.

Reading a lead quote, in England and in Wales

A quote for lead work is easier to compare if it states the same things each time. Check that it names:

  • the code of lead for each detail
  • the length, or the parts being replaced
  • whether VAT is included
  • whether scaffold is included

Ours is a single total with scaffold inside it, backed by photographs of the lead it covers, and any firm can be asked for the same. A quote that cannot say which of those four points it covers is not yet comparable with one that can, and the missing answers are worth asking for before you decide.

Consumer law gives the same protection in England and in Wales. A contract agreed off the trader's premises, such as a quote accepted in your kitchen after a survey, carries a 14-day right to cancel. Work that starts inside those 14 days does so only because you asked for it in writing. For help with a dispute, call the Citizens Advice consumer helpline on 0808 223 1133, or 0808 223 1144 for a Welsh-speaking adviser.

Everything else on lead is under lead roofing.

Related questions

Can I multiply the per metre rate by the length of my flashing?

No. The £50 to £70 per metre is a typical repair rate from one guide, and a total depends on the code of lead, the access, the chase and how much old lead comes off. A sum done at home can miss all of that. We measure at the survey, then put one total in writing.

Does the per metre figure include VAT?

No. Checkatrade says the £50 to £70 per metre is exclusive of VAT and that VAT must be added. MyJobQuote does not state a VAT basis for its chimney flashing figures. When you read any quote, check whether VAT is included, and whether scaffold is, before you compare.

Get your free roof quote

Tell us about the roof and we will arrange a survey.

10-year workmanship guarantee, in writing