01432 610152 Get a quote Call 01432 610152

Listed chimneys

Do chimney repairs on a listed house need consent?

Chimney work on a listed house needs consent when it changes the building's character, and the Act that says so differs in England and Wales.

In brief

Sometimes. In England, section 7 of the Planning (Listed Buildings and Conservation Areas) Act 1990 asks for listed building consent whenever work would alter a listed house's character. In Wales, section 88 of the Historic Environment (Wales) Act 2023 applies the same test. Whether a given chimney job crosses that line is a question for the council, so ask it first and send photographs of the stack.

What the two Acts say about character

In England, section 7 of the 1990 Act demands consent for works to a listed building "in any manner which would affect its character as a building of special architectural or historic interest, unless the works are authorised". The word doing the work is "affect". A chimney stack is part of a house's outline against the sky, which makes it one of the first features we mention to a council.

In Wales, the Historic Environment (Wales) Act 2023 took over on 4 November 2024. Section 88(1) says a person "must not carry out works to which this section applies" unless they are authorised under section 89, which is listed building consent. Section 88(2)(a) reaches "works for the alteration or extension of a listed building in any way that would affect its character as a building of special architectural or historic interest".

Both tests turn on character, not on the size of the job. A small repair can change how a stack looks, while a bigger one may leave it exactly as it stood. We cannot rule on that for you. The council that grants consent is the body to ask, and the method gets settled with it before the scaffold arrives. Nothing is guessed on a listed roof.

Repairs, repointing and rebuilding on a listed stack

A stack is seen from the lane and from the field, so each of these jobs touches something visible. These are the ones to put to the council first:

  • repointing the joints of the stack
  • resetting or replacing a pot
  • renewing the flaunching, the sloping mortar bed that holds a pot in place
  • renewing the lead flashing, the metal strip sealing the joint between stack and roof slope
  • rebuilding the stack above the roof line

None of these is automatically a change of character. The mortar mix, the brick or stone, the pot and the flashing metal decide whether the stack looks the same afterwards. So we photograph the stack from roof level, describe what we found, and hand the council the same pictures you are shown. The mortar question has its own page: lime or cement mortar on a chimney.

Our aim is a repair matched to how the stack was built. A sandstone stack on a timber-framed cottage is mended differently from a brick one, and a listing is where that difference counts. Once the council has replied, you are given one written total for the job, with the scaffold inside it.

Consent and planning permission are separate questions

Listed building consent is one control. Planning permission is another, and the permitted development rights in Class C sit apart from both. A listed house keeps its Class B and Class C rights, and consent is required in addition to them.

Chimney rules for a listed house, side by side
QuestionEnglandWales
Consent law1990 Act, section 72023 Act, sections 88 and 89
Replacing a chimney under Class CExcluded by C.1(d)(i)Excluded by C.1(c)(i)
Listed status and Class CRights stay; consent also neededRights stay; consent also needed

A conservation area or an Article 4 direction can add further controls, so check whether an Article 4 direction applies with your council. For a house inside the Bannau Brycheiniog National Park, ask the National Park Authority. A full rebuild may count as replacing the chimney, which is the subject of whether rebuilding a stack needs planning.

Both permissions are applied for through the council, but they answer different questions, so a yes to one is not a yes to the other. Ask about both at the start, in the same letter, and keep the replies together.

How we prepare a listed chimney job

On a listed roof, order matters more than speed. This is the sequence we follow, beginning at the survey and ending when the site is clear.

  1. We survey the stack from roof level and photograph every face, the pots, the flaunching and the flashing.
  2. We note the materials: the stone or brick, the mortar and the lead.
  3. The proposed method and photographs go to the council with one question: is consent needed?
  4. Nothing is erected until the council's reply is in your hands.
  5. We repair the stack, photograph the finished work and carry off the debris.

If the council asks for something particular, such as a named mortar or the reuse of the existing pots, that goes into the total before you agree. The wider chimney repairs hub covers the rest of the work at the top of the house, and repointing a chimney stack sets out a typical listed-house job in detail.

If your stack stands on a shared wall, a party wall notice may come into it as well. That is a separate matter again, handled by the owner who serves it.

Related questions

Does a conservation area change the rule for an unlisted house?

In England, a conservation area removes permitted development for dormers under Class B, but Class C does not cover replacing a chimney whatever the land. In Wales, the same exclusion sits in C.1(c). Ask your council whether an Article 4 direction applies before you plan any chimney work.

Who do I ask about consent for chimney work?

Ask the council, in England and in Wales alike. Inside the Bannau Brycheiniog National Park, check with the National Park Authority. Send photographs and a plain description of the repair, then file the reply where you can find it again, so there is a note of what was agreed.

Get your free roof quote

Tell us about the roof and we will arrange a survey.

10-year workmanship guarantee, in writing