Callout 1 of 3
Seventeenth-century frames and the covering laid on them
Start with the frame. Volume 3 of the Royal Commission's Herefordshire inventory (1934) describes Winforton's monuments numbered 4 to 10, unless it says otherwise, as buildings that "are of the 17th century and of two storeys, timber-framed, and with tile, slate or stone-covered roofs". Three coverings appear in that one line, so any Winforton house could be wearing tile, slate or stone, or a later replacement for what it began with. We identify yours before offering a view on repair. A house of this age might have changed covering several times, so if part of an older covering survives we mend it in the same material while matching units can be found, and we say plainly when they cannot.
Timber and covering do not move together. Rafters bear on the wall plate, the long beam at wall-head level, and when that beam shifts the courses sitting against it can part. Inside the loft we examine the plate and the rafter feet. Outside we trace where covering meets timber, and photograph stained wood, open verge joints and tiles that have crept down alongside a post. Pictures let us separate the original cause from what you can see below it, and they let you check our reading against your own eyes from the ground.
In the Herefordshire Building Stone Atlas, hosted on Herefordshire Council's website, the bottom horizontal timber of these frames (the sole-plate) "usually sits on a sandstone or siltstone plinth". A spilling gutter lets rain run down towards that plinth. For that reason a Winforton survey follows the rainwater path from the gutter downwards and does not stop at the ridge.
Below the covering, the layers count as much as the top surface. Under high-resistance underlay in a cold roof, Marley asks for a 25mm eaves gap when the pitch is 15 degrees or less, and 10mm where the roof is steeper. That underlay is called high-resistance because it passes no vapour, which is why those gaps must stay open to protect old rafters. We measure the gap in your loft. A soft rafter foot is photographed and its position noted, so the repair is scoped before a price is written. Coverings and fixings are described on our pitched roofing page.
Looked at where a Winforton frame meets its covering
- Wall plate and rafter feet from the loft
- Gaps between covering and timber at each verge
- Slipped or tilted units beside posts
- The eaves ventilation gap above the plate
- Staining on timbers below the eaves
The covering tells us what to repair, and the frame tells us why it moved.















