01432 610152 Get a quote Call 01432 610152

Roofers in Cusop

Roofers for Cusop, a village 19.8 road miles west of Hereford.

We take our time over stone slates, lead and listed roofs, and a single total price follows the survey.

Get a free quoteCall 01432 610152

Stone slates, a Grade II* church, a mill

  • Older cottages with weathered clay tile roofs and brick chimneys behind a flint wall
    Stone slate roofsStone slates are sorted by hand, and sound ones go back on the roof.
  • Slate roofs and chimney stacks along a red brick Victorian terrace
    Lead against stoneWhere lead meets stone, a split flashing lets damp into the wall.
  • Newer homes with grey concrete tile roofs along a curving estate road
    Church of St MaryRoofs on listed buildings need the right consent route before work starts.

Cusop on the map

Cusop on a street map, with a dashed circle around the town and the nearest towns we cover. Tiles © Esri; map data © Esri, HERE, Garmin, OpenStreetMap contributors.

A Cusop roof read in stone and lead

From stone slate to lead flashing to the church wall in Cusop

Three stops, in survey order: the stone-slated slope first, then the chimney with its lead, and finally the walls, church and mill where consent and the council's lists come into play.

A drawn cut-away section through a Herefordshire border house: the front of the main roof is cut open to show the rafters, underlay, battens and slates, beside a black-and-white timber-framed gable. Numbered, from the ridge down: 1 Stone slope; 2 Stack and lead; 3 Wall and listings.

Fig. 1 Cusop's stone slope, stack and wall, numbered on one drawn border house.

Callout 1 of 3

Stone slates on Cusop's slopes

Our Cusop survey opens on the slope, because the covering decides everything that follows. In its 1931 volume on Herefordshire, the Royal Commission on Historical Monuments reported stone slates over the Parish Church of St. Mary, and for the buildings it numbered 4 to 6 in the parish it noted stone rubble walls under "stone slates or modern slates". Those notes describe what the commissioners saw, not your house, so we look at what is on it today. Pictures are taken from the ground and from the ridge line where access allows, which puts the sound slates on record beside the bad ones and lets you compare them yourself.

Stone slates, also called tilestones, are thin slabs of sandstone cut and hung rather like tiles. Herefordshire's building stone atlas names the St Maughans sandstones as the main source of the county's stone roofing slate. SPAB's advice note on slate and stone roofs in Wales and the Marches says they are "predominantly double-lapped", meaning each course is laid to cover the joints of the course below, and adds that there are "some purple types in Herefordshire". Colour and thickness vary from slab to slab, so we match both when new stone is called for.

Where a stone slope has failed in patches, the sound slates are lifted, sorted by size and laid back, and only the broken ones are replaced. SPAB laments that numerous stone roofs have been re-covered in different stones, in slate or in imitation stone slate, and its advice is to check with the quarries whenever a supplier claims stone is unobtainable or slow to arrive. We ring the quarries before a change of material is ever put to you. Stone slates survive best when the battens and rafters beneath them are sound, so those timbers are part of the same inspection. Each slope is judged on what the slates, battens and timbers show, not on a stock lifespan.

Cusop is in England, so a change of covering falls under the Planning Portal's re-roofing guidance, which sets two thresholds: less than 25 per cent of the building envelope, and less than 50 per cent of the roof. Below both, no application is normally called for. A covering that makes the roof 15 per cent or more heavier needs Building Regulations approval, and the structural check comes first. Our slate roofing page covers slate repairs and renewals in more detail.

Reading a stone slate slope

Slate faces
Flaking, split or cracked slabs noted one by one
Courses
Sizes and laps recorded before any slate is lifted
Slipped slates
Traced back to the fixing that gave way
Battens
Timber behind the slates checked for rot
Salvage
Sound slates sorted by size for relaying

A stone slate that has slipped is sorted, noted and laid back, never thrown away by reflex.

Fig. 2 The slopes, drawn close

Callout 2 of 3

Chimney stacks and flashings above the stone

Next, the chimney. Stacks rise above the slopes and meet weather from every side, so we examine the pointing (the mortar joints between stones or bricks), the flaunching (the mortar crown that fixes each pot) and the pots. The report carries pictures of every face of the stack and of its crown, because from the road a stack cannot be read properly. Stone and brick stacks get the same treatment, joint by joint. To see one at close quarters we need a scaffold or tower; that access is part of the written quote and arrives with no surprise later.

Lead is what keeps the junction between stack and slope dry. A flashing is a ribbon of lead pressed into a masonry joint and folded down across the covering; soakers, tiny folded pieces, lie under each course at the side; the back gutter is a lead trough behind the stack that leads water round it. Royston Lead's table gives Codes 4, 5 and 6 for flashings and Code 3 as "Recommended for lead soakers only". On stone slates we dress the lead to follow the surface and keep every lap tight.

New sheet replaces any lead that has split or lifted. MyJobQuote says correctly installed lead flashing "can last for over 80 years", so good lead is left in place and only the failed pieces come out, with sealant never used to hide a split.

Taking out a chimney breast has rules of its own. The Planning Portal says Building Regulations approval will always apply, the breast being part of the house structure. With a shared wall, the neighbour has to receive a notice from whoever is having the work done, the notice running for at least two months before work gets under way. Only a dissenting neighbour, or one silent for 14 days, brings a party wall surveyor into it. Our chimney repairs hub explains repointing, rebuilding and capping.

At the stack, face by face

  • Pointing open or sanded away
  • Flaunching cracked or lifting
  • Pots loose in their bed
  • Lead flashing lifted from the joint
  • Back gutter clear and sound
Fig. 3 Chimneys, drawn close

Callout 3 of 3

The church, the mill and Cusop's lists

Next comes the wall, the place where the roof edge meets the stone. Where the wall head is rubble, the bedding mortar gets a gentle press of the thumb; a joint that crumbles under the eaves tells us damp has been working there for some time. At the eaves and the verge of a rubble wall we look for gaps, for bedding that has dropped out and for stones that have moved. A gutter that overflows soaks the wall head, so any gutter fixed to a stone wall is traced back along its fall to the downpipe. Photographs show the wall head from two angles, which lets you see whether a stone has slipped or only looks it.

Cusop has listed buildings at more than one level. Listed Grade II* is St Mary's church (list entry 1168008, first listed 26 January 1967); Cusop Mill is Grade II (list entry 1168037) and Redwing is Grade II (list entry 1099514), both first listed on 16 November 1984. Under section 7 of the Planning (Listed Buildings and Conservation Areas) Act 1990, works that would affect a listed building's character need consent. St Mary's serves a Church of England parish in the Borderlink Benefice of the Diocese of Hereford, so its roof is dealt with under the faculty jurisdiction while it remains in use, and the council does not grant consent for it. A closed chapel, a Unitarian meeting house or a Quaker one has no such exemption and needs listed building consent from Herefordshire Council. For a listed mill or house there is no fixed answer; we photograph the roof and write down what a sympathetic repair would involve, so you can take that report to the council.

Herefordshire has 64 conservation areas. Herefordshire Council's own conservation area list is the place to look for your address, and that council also answers the Article 4 question for it. New roof windows and dormers at Cusop each carry planning points, and our planning guide for roof windows sets them out.

Building control in Cusop is Herefordshire Council Building Control, Plough Lane, Hereford, on 01432 261938. A registered building control approver may act in its place. Our listed and heritage roofing page describes our approach to protected buildings.

A listing changes who you ask first, not whether a good roof can be kept.

What moves the price of a stone slate job

Salvage
How many of the old slates can be sorted and reused
Replacement stone
What the quarries can supply, and when
Timbers
Battens or rafters found rotten once the slates are off
Access
Whether scaffold stands on one side or on all four
Roof size
The number of slopes, and their pitch

One written total price, never itemised.

Cusop roofs: stone, bats and licences

Can Cusop's stone slates be saved, or does a leaking slope need new covering?

Sound slates are lifted, sorted and laid back, and only broken or split ones are replaced. The Royal Commission's 1931 inventory recorded stone slates on St Mary's parish church and stone or modern slates on its monuments 4 to 6, but that says nothing about your house today. SPAB recommends taking any claim that matching stone is unavailable to the quarries themselves; we get that answer before suggesting a different material.

Who decides on roof work to the Church of St Mary in Cusop?

The church is listed Grade II* (list entry 1168008, first listed 26 January 1967). Its congregation belongs to the Church of England's Abbeydore Deanery, on the border, so as long as worship carries on, roof work there is authorised by faculty instead of listed building consent from Herefordshire Council. A survey of the roof can tell you what is wrong, and the report is yours to pass on.

Does a Grade II listing on Cusop Mill or Redwing alter a roof repair?

It adds a consent step. Cusop Mill (list entry 1168037) and Redwing (list entry 1099514) are both Grade II, so section 7 of the 1990 Act applies to works that would affect their character. Permitted development rights remain with a listed building, though consent must be obtained too. Like-for-like repairs and a change of covering are different questions, so ask Herefordshire Council first and agree materials before work.

What insulation figure must a new roof on a Cusop house reach?

Cusop sits in England, right on the Welsh border. Under AD L 2021 Table 4.2, the figure for a new roof on a house that already stands is 0.15 W/(m²·K), roof windows 1.4 or WER Band B, and rooflights 2.2. Renovating a retained roof uses Table 4.3, with a threshold of 0.35 and an improved figure of 0.16. AD L 2026 Tables 3.2 and 3.3 take over on 24 March 2027.

Do bats complicate stripping an old Cusop roof?

They can. GOV.UK says bats are fully protected by law, and so are their roosts and breeding sites, and it names repairing or replacing a roof as one activity that can touch them. Section 9(4) of the Wildlife and Countryside Act 1981 makes it an offence to disturb bats intentionally or recklessly in a place they use for shelter. If the loft shows signs of bats, we pause and you contact Natural England, which issues licences in England.

Will scaffold on a Cusop lane need Herefordshire Council's permission?

Section 169 of the Highways Act 1980 requires a licence for any scaffold that obstructs the highway. Herefordshire Council charges £167 for a maximum of one month, £123 for every month added, and wants at least 10 days' notice. We arrange the licence with our scaffolder. Call Highways Licensing on 01432 261800. Motorways and trunk roads sit with National Highways, outside the council's remit.

A Cusop roof survey, slope first

A picture of the slope or the stack will do, or just describe the fault in a line or two, and we arrange the visit.

10-year workmanship guarantee, in writing