01432 610152 Get a quote Call 01432 610152

Roofers in Kings Pyon

Chimney, verge and listed-building roof work for Kings Pyon, 9.9 road miles north-west of Hereford.

Every survey photographs the stack, the verges and the frame, and ends with one written total for the job.

Get a free quoteCall 01432 610152

Stacks, verges and listed walls at Kings Pyon

  • Older cottages with weathered clay tile roofs and brick chimneys behind a flint wall
    Stacks and their leadWeather hits a stack on every side, and lead keeps its joint dry.
  • Slate roofs and chimney stacks along a red brick Victorian terrace
    Gable vergesA verge holds the covering at the gable edge and loses its mortar slowly.
  • Newer homes with grey concrete tile roofs along a curving estate road
    Grade I and II* buildingsA church and a hall nearby are listed, so consent shapes roof work.

Where we reach Kings Pyon

Kings Pyon on a street map, with a dashed circle around the town and the nearest towns we cover. Tiles © Esri; map data © Esri, HERE, Garmin, OpenStreetMap contributors.

Kings Pyon, stack, verge and listed frame

A Kings Pyon roof surveyed from the chimney stack to the listed hall and church

Kings Pyon work follows the skyline. We take the chimney stack and its lead first, then the verge where a gable meets the sky, and last the Grade I church and Grade II* hall whose listings decide how a repair may be done.

A drawn cut-away section through a Herefordshire border house: the front of the main roof is cut open to show the rafters, underlay, battens and slates, beside a black-and-white timber-framed gable. Numbered, from the ridge down: 1 Chimney; 2 Gable verge; 3 Church and hall.

Fig. 1 The three Kings Pyon callouts, numbered on a sectioned house.

Callout 1 of 3

Reading a Kings Pyon stack from pots to lead

A chimney stack is the part of the roof that stands in the weather on every side, so a survey of a Kings Pyon house reaches it early. The Royal Commission's 1934 inventory of Herefordshire says of its monuments in the parish (numbers 4 to 13), unless otherwise stated, that they "are of the 17th century and of two storeys, timber-framed, and with tile, stone or slate-covered roofs". The county's stone atlas says the large external stacks of its timber-framed houses are "commonly of local sandstone", so the pointing between those stones matters as much as the lead.

We look at a stack in layers. First come the pots and the flaunching, which is the mortar collar sloped round their bases. We press the flaunching for soft, crumbling mortar and look for pots that have worked loose. Below that is the pointing between the stones, then the flashings, which are strips of lead let into the joints and dressed over the roof covering. Soakers, small lead pieces, are slipped beneath the covering at the sides of the stack, one for each course. Royston Lead's table gives Code 3 as "Recommended for lead soakers only" and lists Codes 4, 5 and 6 for flashings. A back gutter, the lead channel above the stack, turns rain round it. Photographs of each face go into the report with the lead and the flaunching. Where a stack leans or its stones have shifted, we tell you before any price is written.

A split or lifted sheet of lead is renewed; a smear of sealant is never the repair. MyJobQuote writes that lead flashing correctly installed "can last for over 80 years", so a sound sheet stays. Taking a stack down is a different job. The Planning Portal says "Building regulations approval will always apply when removing chimney breasts as they are part of the building's structure." If the breast sits against a wall you share, section 2(2)(g) of the Party Wall etc. Act 1996 lets the owner remove a projecting chimney breast, and the notice must reach the neighbour at least two months before any work begins on the wall. Our chimney repairs page goes further into rebuilding and repointing a stack.

At the stack

Why is the lead round a chimney checked before the brickwork?

Water can get past a stack at the lead, so a split or lifted sheet explains a stain on the ceiling long before crumbling mortar does. We test the lead first, then work down through the pointing and the flaunching.

The top of a stack is hidden from the lane, so the report pictures all four faces.

Fig. 2 Chimneys, drawn close

Callout 2 of 3

Verges on the gables of Kings Pyon

A verge is the sloping edge of a gable, where the roof covering finishes. Its covering is held by mortar or by dry-fix units, and it has to stay put at a point where nothing shelters it from above. Barns and outbuildings can have long gables. The barn standing some 60 metres east-north-east of St Mary's is Grade II (list entry 1111810, first listed 11 February 1992). The Granary and Stables About 20 Yards East of Black Hall is Grade II too (list entry 1301680). On any gabled building we begin by sighting along the verge from the ground to see whether the line has sagged.

Up close we look for mortar that has dropped from the verge tiles, for the strip beneath them, known as the undercloak, that has slipped or cracked, and for gaps where rain can reach the timber under the edge. At a timber-framed gable the verge meets the frame itself, so we also check for staining down the posts and the bargeboard, the timber board that dresses the gable edge. Rot in a bargeboard is cut out and made good, and a patch of fresh sealant is never left to hide it.

Marley says "Installing to BS 5534 isn't required by law". Dry-fix ridge, hip and verge systems come under BS 8612, and their units clip or screw down instead of resting on mortar. We also look at the last course beside the verge, where a cut tile or a half-width slate may fill the gap and shed water poorly if it is short or badly fixed. We use dry-fix where it suits the building, and keep a mortar bed on a historic gable where the look of the verge matters. Either way, the verge tile is fixed mechanically.

Two storeys up, a gable is out of ladder reach, so the work is done from scaffold. Scaffold on the highway takes a section 169 licence under the Highways Act 1980, and we arrange the licence with our scaffolder. Our roof repairs page explains how a verge repair is scoped and photographed, so you can see the faults before you read a price.

What sets the price of a Kings Pyon verge repair

Length of verge
How far the loose run extends along the gable
Height and access
Whether the gable can be reached without scaffold
Covering to match
Tile, slate or stone, and how easily it is matched
Condition of the timber
Any bargeboard or frame that needs cutting out
Listing
Consent and method agreed before work begins

One written total price, never itemised.

Fig. 3 The verge, drawn close

Callout 3 of 3

St Mary's church, Black Hall and the listed barns

The last stop is the oldest fabric in the parish. St Mary's church is Grade I (list entry 1179970, first listed 2 September 1966), and Black Hall is Grade II* (list entry 1301676, first listed 20 February 1953). Parish church roofs of the Church of England in use follow the faculty route, which is how repairs to St Mary's are authorised, and the council's listed building consent is not the route for it. Black Hall is a house, and a house is different: listed building consent under section 7 of the 1990 Act covers any works that would affect "its character as a building of special architectural or historic interest", beside the rights the house already holds.

The list entries describe what is protected, so we read the entry for a listed roof before pricing it, and photograph the roof as found. That record helps if an application is made. Check Herefordshire Council's own conservation area list for your address, since 64 areas are designated across the county, and ask whether an Article 4 direction applies. For a roof window or dormer, start with our planning guide for roof windows, because it sets out the conditions in full.

At a framed gable we check the junction of timber and covering. We look for gaps, for damp at the posts, and from the loft for the wall plate and rafter feet, which are the timbers that take the load and show damp first. A repair in matching materials lets an old frame keep moving without the new work cracking. A listed barn or granary is not a house, but it is listed all the same, so we record its tile or stone, the sizes and the colour, and choose any new material to match.

Building control for a Kings Pyon address is Herefordshire Council Building Control, reached at bce@herefordshire.gov.uk, and a registered building control approver may act in its place. Our listed and heritage roofing page covers our approach to protected roofs, including the listed roof of a church or hall.

Before work on a listed Kings Pyon roof

  • Read the list entry for the building
  • Photograph the roof as found
  • Agree the method with the council
  • Match tile, slate or stone to the old
  • Keep the faculty route for church roofs

Kings Pyon roofs: stacks, verges and listings

Why does lead matter so much on a Kings Pyon chimney stack?

A stack takes rain from every side, and the lead flashings, soakers and back gutter are where it is kept out of the roof. A split sheet can stain a ceiling long before the masonry shows any wear. Royston Lead's table suits Code 3 to soakers only and Codes 4 to 6 to flashings, and MyJobQuote says correctly installed lead flashing "can last for over 80 years".

Can a Kings Pyon gable verge be fixed dry instead of with mortar?

Yes. BS 8612 covers dry-fix ridge, hip and verge systems, which clip or screw the units down. Marley says mortar alone is no longer enough to hold the covering, so even a bedded verge is held mechanically too. On a historic gable we may keep a mortar finish for appearance, with a hidden fixing behind it, and we explain the choice beforehand, so that nothing is a surprise on the day.

Does taking out a chimney breast at Kings Pyon involve the neighbour?

It can. According to the Planning Portal, removing a chimney breast always needs Building Regulations approval. A breast on a shared wall means the owner doing the work must serve a party wall notice so that the neighbour has at least two months' warning. The neighbour can agree in writing, and a surveyor is needed only after a dissent or 14 days of silence. Building control and the party wall surveyor are separate matters.

Can the roof of Black Hall at Kings Pyon be altered without consent?

Black Hall is a Grade II* house, so any job touching the qualities that earned that grade needs listed building consent from Herefordshire Council, in addition to any permitted development rights the house still holds. Ask the council before work is priced or booked. We photograph the roof as found, so any application starts from a clear record of the covering and the lead.

Where can I see whether a Kings Pyon address sits in a conservation area?

Use Herefordshire Council's own conservation area list and boundary maps, searched by street. The county has 64 areas in all. Ask the council as well whether an Article 4 direction applies to your house, because a direction can withdraw permitted development rights. Do both checks before accepting a quote, as they can change what may be done to a roof.

Does a full re-roof at Kings Pyon involve Part L insulation?

It can. Kings Pyon is in England, so until 24 March 2027 AD L 2021 Table 4.2 gives 0.15 for a new roof and Table 4.3 gives a 0.35 threshold and 0.16 improved figure for renovation. After that date AD L 2026 Tables 3.2 and 3.3 apply. Herefordshire Council Building Control, or a registered building control approver, confirms the route for your roof, and the survey notes which insulation figure applies.

Ask for a Kings Pyon stack-and-verge survey

Send a photograph of the chimney, the gable edge or the whole roof, and we will fix a day to call.

10-year workmanship guarantee, in writing