01432 610152 Get a quote Call 01432 610152

Roofers in Ryall

Roof repairs and re-roofs in Ryall, from Grade II farmhouses to flat-roofed extensions.

The survey climbs to the ridge first, photographs every fault it finds, and ends in one written total.

Get a free quoteCall 01432 610152

Parish thatch, listed farmhouses and flat extensions

  • Older cottages with weathered clay tile roofs and brick chimneys behind a flint wall
    Thatch elsewhere in the parishUckinghall, also in Ripple parish, is recorded with half-timber cottages under thatch.
  • Slate roofs and chimney stacks along a red brick Victorian terrace
    Listed farmhouses and Ryall HillRyall Farmhouse, Ryall Hill and Holly Green Farmhouse are all Grade II.
  • Newer homes with grey concrete tile roofs along a curving estate road
    Flat extension roofsLean-tos and rear extensions carry membranes with lifespans of their own.

Our route to Ryall

Ryall on a street map, with a dashed circle around the town and the nearest towns we cover. Tiles © Esri; map data © Esri, HERE, Garmin, OpenStreetMap contributors.

Ryall roofs, stack to flat roof

Frame, farmhouse and extension: three callouts across Ryall roofs

Our Ryall survey starts at the junction of roof and timber frame, or roof and thatch, moves to the listed farmhouses and what listing asks, and ends on the flat roofs that older houses acquire.

A drawn cut-away section through a Herefordshire border house: the front of the main roof is cut open to show the rafters, underlay, battens and slates, beside a black-and-white timber-framed gable. Numbered, from the ridge down: 1 Frame and thatch; 2 Listed farmhouses; 3 Flat extension roofs.

Fig. 1 A Ryall house sectioned: framed wall, listed farmhouse eaves and flat extension.

Callout 1 of 3

Timber frames, thatch and what a roofer covers

The Victoria County History (1913), in its account of Ripple parish, which includes Ryall, records the hamlet of Uckinghall as containing "many cottages of half-timber with thatched roofs". For Ryall itself the same account notes a Wesleyan chapel at Ryall Grove and a farm called Ryalls Court. Thatch is its own trade, and a thatched roof goes to a specialist thatcher. A roofer's work on a framed and thatched house lies in everything around the thatch: the chimney stack that rises through it, the tiled or slated extension built on later, the gutters on the lower buildings and the timber frame itself.

A chimney that rises through a thatched ridge gets the closest look, from the loft and from the ground. The brickwork above the thatch line, its pointing and the mortar crown on top must stay sound, because loose masonry drops onto the roof below. The stack is photographed from each side and the set goes to you, so any repair is chosen from pictures rather than a guess.

Gutters on the lower buildings, such as a lean-to or an outhouse beside the house, are checked against the fall Brett Martin gives, "1mm for every 600mm", and for joints that have parted where an old timber fascia has moved. A downpipe that empties against a framed wall wets the foot of the frame, so we look at where the water ends up as well as where it starts.

On the frame, the survey looks for movement. The wall plate and the posts under the eaves tell us whether the roof is sinking, and a gap between a framed wall and a later extension shows where the two have parted. Where a tiled or slated extension joins an old framed wall, a lead flashing closes the gap, and it must be fixed loosely enough to follow the timber as the seasons move it.

Slate and tile on a later extension last for different lengths of time. HomeBuilding gives Welsh slate "100+ years", and SPAB says "the life of a well-slated roof is likely to be more than 100 years". For clay tiles, Marley reports a BRE minimum life expectancy of 60 years. Those are published figures, not promises. Our chimney repairs page covers stacks that pass through awkward roofs.

Terms met where a Ryall roof meets a frame

Wall plate
The long timber on top of a wall, carrying the rafters
Flashing
Lead or metal strip that seals the join between two surfaces
Verge
The edge of a roof where it overhangs a gable
Crown
The mortar cap on a stack, around the pots

Thatch goes to a thatcher; the stack, the lead and the gutters around it are ours to inspect.

Fig. 2 Timber frames, drawn close

Callout 2 of 3

Grade II farmhouses and what listing asks

Among the listed houses at Ryall are Ryall Farmhouse (list entry 1157227) and Ryall Hill (list entry 1099088), both first listed on 14 June 1985, and Holly Green Farmhouse (list entry 1099077). All three are Grade II. A roof is part of what the listing protects, because section 7 of the Planning (Listed Buildings and Conservation Areas) Act 1990 requires consent for works that would "affect its character as a building of special architectural or historic interest".

In practice a farmhouse roof is discussed with Malvern Hills District Council before the scaffold goes up: what comes off, what goes back, and how the new fixings look from the ground. A listed house keeps its permitted development rights, and the consent is an extra layer. Photographs taken at the survey, slope by slope, go into the application, so the planners are looking at the roof as it is today.

Old roof timbers carry the covering across wide spans, so the survey checks where the purlins and rafters bear on the walls. A heavier covering is a separate decision: a new covering that "increases the weight of the roof covering by 15 per cent or more" needs approval first, says the Planning Portal, and a structural check comes before the order is placed.

Old materials are worth rescuing. SPAB's advice on the slate and stone roofs of the Marches puts it plainly: "Claims of unavailability or long delivery times should always be checked with the quarries." So before anyone suggests a change of covering for a listed roof, we ask whether the old covering can be lifted, graded and laid again, with new pieces ordered only to fill the gaps.

Malvern Hills District Council publishes the conservation area list, which names areas at Ripple and at Uckinghall in the same parish and is the place to look up a Ryall address. Its stated position on Article 4 is "At present there are no Article 4(2) Directions in force in Malvern Hills District Council." Roof windows and dormers sit under a different set of rules, which our planning guide explains. Malvern Hills District Council, Worcester City Council and Wychavon District Council share South Worcestershire Building Control, which is the building control for a Ryall address. Our listed and heritage roofing page sets out the method.

Listing and the roof

Does a Grade II listing stop a Ryall farmhouse being re-roofed?

No. A listed roof can be renewed. What changes is the order of events: the council is asked first, and it considers how the finished roof will look and how it is fixed.

Fig. 3 Wall abutments, drawn close

Callout 3 of 3

Flat roofs on lean-tos and rear extensions

Older houses collect extensions, and an extension brings a flat or near-flat roof. Published lifespans differ, so here are two sources side by side. HomeBuilding gives EPDM rubber 25-30 years where Less gives 30 to 50 years, GRP 25-30 years against Less's 25 to 40, and torch-on felt 10-15 years against 10 to 20. Each is a range from a third party, and a membrane laid badly will not reach any of them.

Replacing the membrane is not just a patch job. AD L 2021 counts "Replacing the waterproof membrane on a flat roof" as renovation, which brings in Table 4.3: a roof threshold of 0.35 and an improved figure of 0.16. That is why a quote for a new flat roof on a Ryall extension should say whether insulation is part of it. South Worcestershire Building Control or a registered building control approver can confirm what applies to your roof.

The fall decides whether water leaves the roof or stays on it. BS 6229:2025 covers flexible membranes, not lead, and IKO advises designing for a fall of 1:40, which leaves the built roof reaching the 1:80 finished minimum. We measure the existing fall with a level before pricing, and we photograph any pooled patch and the stained deck beneath it.

At the edges, the drip, the upstand and the junction against the old wall do as much work as the membrane. A flat roof that abuts a half-timbered wall needs its upstand covered by a flashing that is let into the wall, never squeezed behind the frame. Where a rooflight is added, its kerb is built up above the membrane and sealed on all four sides. Moss and leaf litter collect where the membrane meets the wall, so the outlets are cleared before the state of the deck is judged. Our flat roofing page lists the materials we work with.

What drives the price of a flat roof on a Ryall extension

Deck condition
Whether boards or joists need renewing
Insulation
Thickness needed to meet the Part L figure
Edge details
Drip, upstand and flashing against the old wall
Rooflights
Number, size and the kerbs they sit on
Access
Scaffold position and how far materials are carried

One written total price, never itemised.

Ryall roofs: thatch, slate, bats, surveys and costs

Who deals with the thatch on a thatched house near Ryall?

A specialist thatcher; thatch is a separate trade from tiling and slating. On the same house we look after the chimney stack where it rises through the ridge, any tiled or slated extension, the lead where roofs meet the frame and the gutters. If the survey spots a fault in the thatch, it is photographed so that you can hand the picture to the thatcher. The report also records the state of the frame and masonry where thatch meets them, since those parts are ours to deal with.

Can reclaimed slates go back on a Ryall farmhouse roof?

They can, and a listed house starts from that point. HomeBuilding's table gives reclaimed Welsh slate 50-80 years, against 100+ years for new Welsh slate and 75-100 years for Spanish. For supply only it lists Welsh slate at £185 per m² and Spanish at £72 per m². Sorting the sound slates from the failed ones is done on the scaffold, slate by slate, with the rejects counted so the shortfall is known before ordering.

What do flat roof repairs cost per square metre near Ryall?

Checkatrade's June 2026 repair rates, before VAT and per m² up to a maximum of 3 m², are EPDM rubber £120 to £170 and GRP fibreglass £130 to £180. Those are national guide rates, never multiplied into a total, and not Horizon prices. How large the damaged area is and what condition the deck beneath is in decide the real figure, which arrives in writing after the survey.

What do surveys say a whole new roof costs?

They disagree widely. Which? (November 2025, before VAT) gives £7,000-£21,000 for re-roofing a whole average three-bedroom house, and MyJobQuote gives the average new roof as around £5,250. HomeBuilding costs a 65 m² semi at £10,000 to £15,000 in plain concrete tiles; for Welsh slate it says the figure "might reach £18,000". None of those is a Ryall price; the written total follows the survey of your own roof.

Does a bat roost in a Ryall loft change the roof job?

It does. Regulation 43 of the 2017 Habitats Regulations also covers damage to a roost, and that limb carries no test of intent, so accidental harm to a bat's home is still an offence. Where the roost cannot be avoided, Natural England is the body in England that may license the work, per GOV.UK. Droppings in the loft or staining under the eaves are recorded at the survey, and the job waits for advice.

What would a surveyor's visit to a Ryall roof cost?

In MyJobQuote's roof survey guide (12 October 2026) the average comes to around £300: £100-£200 for a basic visual check, £250-£400 for a full survey and £200-£350 for a drone survey. These come from a national guide published by a third party, and none is a Horizon price. Our survey is photographed slope by slope, and the one written total for any work comes from it, with the pictures and the report staying with you whatever you decide.

Describe the Ryall roof and we will survey it

Say which lane the house is on and what has gone wrong with its roof, then we will arrange the survey.

10-year workmanship guarantee, in writing