01432 610152 Get a quote Call 01432 610152

Roofers in Longdon

Roof repairs and re-roofs in Longdon, a village of listed houses and a Grade II* church.

We look at stacks and gables first, then send you pictures and write down one total price.

Get a free quoteCall 01432 610152

Timber and plaster, brick stacks, listed roofs

  • Older cottages with weathered clay tile roofs and brick chimneys behind a flint wall
    Roofs on timber-framed wallsFrames move, so the covering at the wall plate can open up.
  • Slate roofs and chimney stacks along a red brick Victorian terrace
    Brick chimneys above the tilesBrick stacks need sound pointing and lead that has not lifted.
  • Newer homes with grey concrete tile roofs along a curving estate road
    Porch roofs and hipsA hipped porch roof has capping and corners that wear separately.

Roads into Longdon

Longdon on a street map, with a dashed circle around the town and the nearest towns we cover. Tiles © Esri; map data © Esri, HERE, Garmin, OpenStreetMap contributors.

Timber, brick and tile: reading a Longdon roof

Longdon roof checks: the framed wall, the brick stack and the porch hip

We survey Longdon roofs in three stops: where the covering meets a timber frame, the brick chimney stack and its lead, and the corners and hips of a porch or wing, finishing with listing, licences and building control.

A drawn cut-away section through a Herefordshire border house: the front of the main roof is cut open to show the rafters, underlay, battens and slates, beside a black-and-white timber-framed gable. Numbered, from the ridge down: 1 Framed wall head; 2 Brick stack; 3 Porch hip and licences.

Fig. 1 A Longdon roof in section: framed wall head, brick stack and hipped porch, numbered.

Callout 1 of 3

A tiled roof meeting timber and plaster

Our first stop in Longdon is the wall head, where the roof sits on the top of the wall. The Victoria County History's 1924 account of the parish describes Eastington Hall, north of the village beyond Yard Bridge, as having "red tiles" on its roofs and chimneys "of brick", with principal elevations "almost entirely of timber and plaster on a low stone base". On a house built that way the roof rests on a timber frame, and a frame is not rigid. It shifts with the seasons and with age, and the covering has to follow it without letting water through the gap.

We go up on the roof, then into the loft. Outside, we check the eaves course, the row of tiles that overhangs the wall head, and the plaster beneath for hairline cracks or stains that trace a path down from the roof. Inside, our torch goes to the wall plate, the horizontal beam that crowns the wall and carries the rafters, and at the foot of each rafter where it bears on the plate. In an old frame, damp can show on the loft timbers before a ceiling below changes colour, and a wet patch on a plate tells us where the water gets in.

Longdon has several listed houses. The Moat House is Grade II* (list entry 1238754, first listed 25 March 1968), Churchend Farmhouse is Grade II (list entry 1274000, first listed 30 May 1984) and the Old School Lodge and the Old School House are Grade II (list entry 1238864). A repair on a house like these matches the covering already there, tile for tile where we can, and the work is fixed with the council before it starts. With listed buildings the first conversation is with Malvern Hills District Council, not with a tile merchant, because the consent decides which materials are allowed.

A house may be re-tiled more than once over its life, so the tiles on the roof today may not be the ones it started with. The survey records what is there now. Our pitched roofing hub describes tiled roofs in more depth, including the underlay and battens beneath them.

Checked where roof meets a framed wall

  • Eaves tiles that have slipped or cracked
  • Plaster stains tracing down from the roof
  • The wall plate, from inside the loft
  • Rafter feet where they bear on the plate
  • Lead or mortar where the roof abuts a wall

A timber frame moves with the seasons, and the roof covering has to move with it.

Fig. 2 Timber frames, drawn close

Callout 2 of 3

Brick stacks, ivy and the lead round them

The same 1924 account mentions "the large ivy-covered hall chimney" on Eastington Hall, and ivy is a useful reminder of what a stack goes through. Its roots work into open joints, and the leaves hold moisture against the brickwork. Where a Longdon stack carries ivy, we cut it back and then look at what lies behind. A stack that has stood for generations is judged by its brick faces, its joints and whether the shaft still stands plumb, and we note all three in the report. The face of the brick may be flaking, a fault known as spalling, and the mortar joints may have been opened up by the roots. Repointing in a mortar that suits the brick comes before anything else, since lead flashings are let into those same joints and cannot hold in crumbling mortar.

Flashings are the strips of lead that seal the stack where it passes through the roof. Soakers are small folded pieces that are threaded between the tile courses beside it. Behind the stack, a lead-lined tray called the back gutter turns the water away round both sides. In Royston Lead's table, Code 3 is "Recommended for lead soakers only", which is why flashings take a heavier code. We dress each piece so that it can expand and contract without tearing, and we do not seal over a split with mastic.

On the stack top we examine the pots and the flaunching, the mortar slope they are bedded in. MyJobQuote says lead flashing "can last for over 80 years", a figure with a hedge in it, so sound lead on a stack is left where it is. If your plan is to take a chimney breast out, the Planning Portal says that "Building regulations approval will always apply when removing chimney breasts as they are part of the building's structure." A breast built into a wall shared with a neighbour brings the Party Wall etc. Act 1996 into play: the building owner must give the neighbour notice of at least two months, served before any cutting begins.

Our chimney repairs hub covers rebuilding, repointing and the leadwork around a stack.

A question about stacks

Should ivy be pulled off a brick chimney?

Not by hand. Pulling it tears at joints and brick faces. We cut the stems at the base, let the growth die back and then remove it gently, checking the mortar behind. Where the roots have opened joints, the stack is repointed before any lead is touched.

Fig. 3 Chimneys, drawn close

Callout 3 of 3

A porch roof, the church and the paperwork

The last stop is the roof slopes around a porch or a wing. The 1924 account gives Eastington Hall a two-storied porch with a hipped roof in the angle between a wing and the main house. Where two roofs meet at such an angle, the inside corner forms a valley, a channel that carries the water of both slopes, and the outside corners form hips. Each carries water or capping of its own, and each wears in its own way. We lift the tiles beside a valley to see the lining, clear what has collected in it and photograph the bed. We also study the junction where a porch roof meets the main wall, because a lead flashing that has lifted there lets rain run down behind the plaster and into the frame.

For re-roofing, the Planning Portal sets the England test: no application is normally needed when "Less than 25 per cent of the total 'building envelope'" and "Less than 50 per cent of the roof" are affected. Past those limits, building control is involved, through South Worcestershire Building Control, which Malvern Hills District Council, Worcester City Council and Wychavon District Council operate together, or through a registered building control approver. Heavier coverings, at "15 per cent or more", need a structural check.

The Church of Saint Mary is Grade II* (list entry 1238836, first listed 25 March 1968), and as an Anglican church open daily, with Holy Communion on the fourth Sunday of the month, it has its roof works come under the faculty jurisdiction rather than listed building consent while it stays in use. For conservation areas, check Malvern Hills District Council's own list for your address. The council says that "At present there are no Article 4(2) Directions in force in Malvern Hills District Council." Dormers and roof windows raise planning questions of their own, which our planning guide for roof windows answers in full.

When a scaffold stands on the highway, the Highways Act 1980 calls for a licence. Worcestershire County Council treats the contracted company as the applicant, in its words "required to apply", and we arrange the licence with our scaffolder. Our listed and heritage roofing hub explains how we handle roofs on protected buildings.

Roof terms met on a Longdon survey

Wall plate
The beam along the top of a wall that carries the rafters
Hip
The outside corner where two roof slopes meet at an angle
Valley
The inside corner where two slopes drain into one channel
Spalling
Brick faces flaking away because of frost or damp
Faculty
The Church of England's own consent system for church buildings

Longdon roofs: frames, stacks and the church

What should a roofer check where a Longdon roof meets a timber-framed wall?

We start with the eaves tiles and the plaster below them, then go into the loft to examine the wall plate and the foot of each rafter. A frame moves, so we hunt for daylight between covering and wall, for stains running down the plaster and for wet timber. You receive pictures of each, so the true cause is plain to see before any repair is priced, and the report names the length of eaves affected.

Should a brick chimney in Longdon be repointed before the lead is renewed?

Yes. Lead flashings are set into the stack's own mortar joints, and they cannot hold in crumbling mortar. We rake out the poor joints, repoint in a mortar that suits the brick and then dress the lead into the clean joint. If ivy has taken hold, it is cut back first and the brick behind it is checked for spalling, which shows as flaking faces.

Does roof work on Longdon's church need listed building consent?

Historic England lists the Church of Saint Mary at Grade II* (list entry 1238836, first listed 25 March 1968). As a Church of England church still used for worship, it falls under the faculty jurisdiction for roof works, not listed building consent. Other listed buildings in the village, such as the Moat House at Grade II*, follow the ordinary route: consent from Malvern Hills District Council.

Is my Longdon house in a conservation area?

Check Malvern Hills District Council's own conservation area list against your address, because only the council can confirm it. The council states that "At present there are no Article 4(2) Directions in force in Malvern Hills District Council." Restoring a roof to its existing look is one matter, while dormers and roof windows are covered by our planning guide.

What would a scaffold licence cost on a Longdon road?

For scaffolding set up on a highway, the charge from Worcestershire County Council is £85 per week and £65 for subsequent weeks, with a £25 urgency surcharge on urgent applications. On Worcestershire County Council's page, the firm you contract is the one "required to apply". We arrange the licence with our scaffolder, with the scaffold folded into the quote. Because the licence is charged by the week, the date you choose affects the fee.

How much of a Longdon roof can be re-covered before an application is needed?

Two measures from the Planning Portal decide it in England: less than 25 per cent of the building envelope, and less than 50 per cent of the roof. Keep below both thresholds and no application is normally needed. A whole-roof re-cover goes to building control. Where the new covering adds 15 per cent or more to the weight, approval and an engineer's check are required first. New insulation brings Part L into the job.

Book a stack-and-frame survey in Longdon

Describe the stack, wall head or porch you are worried about; we book the visit and give you one price.

10-year workmanship guarantee, in writing