Callout 1 of 3
Pitch and lifespan across a Hanley Swan slope
Pitch is the angle a slope makes with the horizontal, and every covering has a lowest angle at which it sheds water reliably. Marley publishes the minimums by product. Its clay Canterbury tile wants 40 degrees, its Hawkins 30, and its Lincoln pantile just 15. Among concrete tiles, the Plain tile needs 35 degrees, the Double Roman 22.5 in the smooth finish, the Mendip 15 and the Ludlow Plus 22.5. Those are product names and not regions. Natural slate comes with conditions: Cupa reports that BS 5534 indicates a minimum of 20 degrees for a 500mm slate with a 115mm overlap in an area of moderate exposure, and adds that nobody should use hook fixings below 25 degrees.
That is why the survey measures the pitch before it says anything about replacement, using a digital level held along a rafter line, with the reading photographed beside the tile. A slope that is shallow for its tile will leak however well the tiles are laid. A slope that is steep enough but tired is a different case, where age and fixings are the questions. The data sheet for the product on your roof settles the minimum, and we read it against the angle we measure. Where the tile has been discontinued, the nearest current product's sheet is the guide, and the report names it.
Lifespans come with their sources. For clay tiles, Marley says the BRE set a minimum life expectancy of 60 years, while HomeBuilding gives 60-80 years. Marley expects concrete tiles to last around 60 years, yet HomeBuilding puts plain concrete at 40-50. Welsh slate is 100+ years in HomeBuilding, Spanish slate 75-100, and reclaimed Welsh slate 50-80. SPAB's view of a well-slated roof is that it is likely to outlast a century. These are typical ranges for new work and never a promise for the roof you have.
The 1924 Victoria County History, writing on Hanley Castle parish, records that the church of St Gabriel, which it places at Hanley Green, "was built in 1872" to designs by Sir Gilbert Scott and "is built of stone in early 14th-century style". It says nothing of the roofs on the houses around it, so the survey of yours starts from what is actually there. What we find on your slope decides the repair, and our pitched roofing page covers the coverings we work with.
Minimum pitches as Marley and Cupa publish them
- Clay Canterbury tile
- 40 degrees
- Concrete Plain tile
- 35 degrees
- Concrete Mendip tile
- 15 degrees in the smooth finish
- Natural slate, 500mm long
- 20 degrees at moderate exposure, 115mm overlap
- Slate hook fixings
- Not for any pitch below 25 degrees
A slope that is too shallow for its tile will leak however well the tiles are laid.















