Callout 1 of 3
Moss, cleaning and the surface of an Orcop roof
Orcop lies 10.2 road miles south of Hereford, about 19 minutes' drive. A survey there starts with what the weather has left on the covering. Moss and lichen settle on the shaded face of a slope, in the laps between tiles and down in the valleys, and where they gather the surface holds moisture. We note where the growth is thick, where it has packed a gutter and where it has lifted an edge, and each area is photographed before anything is touched.
How a roof is cleaned matters as much as whether it is. Marley, the tile maker, lists high-powered jet washes as "not recommended", because the face of the covering can be marked and its expected life cut. So the growth is lifted by hand and a biocide is applied to the surface, which is how every roof is cleaned. After cleaning, we return to the worst areas with the camera. A tile that growth was holding can drop once the moss is lifted, so the second set of photographs is the true record of the surface and the base for the written price.
A clean roof shows what lies beneath: cracked tiles, slipped slates, open mortar at the ridge, flashings that have lifted. For that reason a cleaning visit begins as a condition survey. Cleaning will not mend a worn covering, and if the roof is spent, the answer is a repair or a re-cover, whichever the survey supports. Lifespans put the question in context. HomeBuilding gives plain concrete tiles "40-50 years" and Welsh slate "100+ years", while Marley says concrete roof tiles "are expected to last for around 60 years".
Gutters hold whatever comes off the roof. We clear them by hand and run water along each length to see where it stands. Brett Martin, the gutter maker, advises "1mm for every 600mm" as the fall, so a length that holds water after clearing has sagged. Our roof cleaning and moss removal page explains each step, from the first photographs to the final rinse of the gutters. Fascias and soffits are checked at the same visit, because that is where an overflowing gutter shows its mark first.
On an Orcop slope before cleaning
- Moss in the laps and the valleys
- Gutters and downpipes clear and falling
- Cracked or slipped tiles under the growth
- Ridge mortar and flashings once clean
- A photograph of each area before and after
Cleaning does not mend a worn covering, so every wash starts with a condition survey.















