Callout 1 of 3
Slates, hooks and the lead that holds them tight
The Royal Commission's 1931 inventory of Herefordshire said of Kentchurch Court that "the roofs are covered with slates and lead." The Court is Grade I (list entry 1157632, first listed 29 September 1952), and that single line is a fair brief for the first part of our survey: a slated slope, and the lead that finishes it at every wall, chimney and valley. Whatever covers your own house, the order of the inspection is the same. We start with the slates, then the metal.
A slate is held by a nail or by a hook, and it slips when that fixing corrodes or the slate itself cracks across. A slipped slate shows as a pale batten or a dark gap in a course. Cupa, a slate supplier, quotes BS 5534 as indicating a minimum pitch of 20 degrees for natural slate in an area of moderate exposure with a slate 500mm long and a 115mm overlap, and advises against hook fixings on pitches under 25 degrees. So the pitch of your roof limits what can be repaired with hooks. SPAB writes that roofs in slate and stone across Wales and the Marches are predominantly double-lapped, meaning each course is covered by the course above it with a deep overlap, and we keep that lap when we relay.
Lifespan is a range. HomeBuilding gives Welsh slate 100+ years, Spanish slate 75 to 100 years and reclaimed Welsh slate 50 to 80 years, and for a well-slated roof SPAB thinks a life beyond 100 years likely. A slate roof with a dozen slipped slates is therefore not necessarily a roof at the end of its life. We count what has moved, check whether the cause is local to one area or runs across the slope, and say which it is. The photographs in the report mark each slipped slate, so a repair and a relay can be compared on the evidence.
Lead is the other half. Royston Lead's table lists Code 3 as "Recommended for lead soakers only" and Codes 4, 5 and 6 for flashings, and MyJobQuote's hedge on a flashing fitted correctly is that it "can last for over 80 years". A soaker is the folded piece that slides under a slate beside a wall, and a flashing is the strip that laps over the slates and into the wall joint. Where either has split, we replace it. Our slate roofing page covers relaying, and lead roofing covers the metalwork.
Slate and lead details at Kentchurch
- Slates
- Nailed or hooked, checked course by course
- Hook fixings
- Not used on a pitch below 25 degrees
- Flashings
- Lead turned into the wall joint and lapped over
- Soakers
- Code 3 lead, folded under each course
- Pointing
- Raked out and refilled where a joint has opened
The pitch of a slate roof decides which repairs are possible.















