Callout 1 of 3
Where a roof meets a half-timbered wall
The Victoria County History of 1913 describes Welland's old vicarage as "a half-timber building covered with rough-cast". Half-timber means a visible frame of oak or similar, with the spaces between filled in; rough-cast is a coarse coat thrown onto the infill. A roof that ends against a wall like that has an awkward job, because the covering is rigid and the frame beside it shifts a little with the seasons. Gaps between the two are where we begin looking.
At a framed gable we study the verge, which is the stretch of roof edge running up the end wall. Mortar that has dropped out of a verge, or a verge tile that has slipped, lets rain reach the timber behind. In the loft we probe the wall plate (the beam laid across the wall head, which takes the rafters), and press the rafter feet where they sit on it. Daylight showing through the infill at the top of the frame is noted, with its position on the wall. Staining on a wall plate, or a soft patch under the probe, tells us more than a ceiling mark does, because it shows a slow leak that has not yet come through.
Old timber roofs shelter wildlife too. GOV.UK describes every bat species as fully protected, along with the places they roost in or breed, and names roof work among the things that can affect them. Disturbing a bat in its shelter, intentionally or recklessly, breaks section 9(4) of the Wildlife and Countryside Act 1981; regulation 43 of the Habitats Regulations 2017 goes further, treating harm to a bat's roost as an offence with no intent needed. Natural England issues licences in England. A bird's nest is protected as well while birds are in it or still building, so a nest on the wall plate holds up the work. At every survey we search the loft for droppings, stained timber and nesting material, and we tell you what we saw.
The repair follows what the survey finds. Sometimes it is a bedded verge and two replaced tiles. Sometimes it is a stripped slope, with the battens, the timber laths carrying the covering, renewed. Our pitched roofing page describes both, and a photograph of each gap goes into the report before any price is written.
Looked at where a Welland roof meets a frame
- Verge mortar and the tiles along the edge
- Wall plate stains or soft timber
- Rafter feet where they rest on the plate
- Gaps between covering and frame
- Droppings or nesting material in the loft
A rigid roof against a moving frame leaves gaps, and the survey finds them first.















