01432 610152 Get a quote Call 01432 610152

Roofers in Govilon

Roof work in Govilon, inside the National Park, from tall slate roofs to rendered stacks.

Govilon is 27.9 road miles from Hereford, south-west, a 40-minute drive. Every survey ends in photographs and one written total.

Get a free quoteCall 01432 610152

Tall slate, rendered stacks and Park rules

  • Older cottages with weathered clay tile roofs and brick chimneys behind a flint wall
    An M-shaped slate roofCadw's listing for Govilon House describes a tall slate roof, originally M-shaped.
  • Slate roofs and chimney stacks along a red brick Victorian terrace
    Cement-rendered chimney stacksThe listing records stacks to the rear pitch, rendered in cement.
  • Newer homes with grey concrete tile roofs along a curving estate road
    Inside the National ParkThe Park Authority decides planning, so roof windows need a call first.

Our map around Govilon

Govilon on a street map, with a dashed circle around the town and the nearest towns we cover. Tiles © Esri; map data © Esri, HERE, Garmin, OpenStreetMap contributors.

Govilon: valley, stack and Park rules

An M-shaped slate roof, rendered stacks and the rules of the National Park

We start in the valley between the two slopes of a tall slate roof, move to the rendered stacks above the cross wall, and finish with the Park, church and cottage listings that decide what may be changed.

A drawn cut-away section through a Herefordshire border house: the front of the main roof is cut open to show the rafters, underlay, battens and slates, beside a black-and-white timber-framed gable. Numbered, from the ridge down: 1 Valley gutter; 2 Rendered stacks; 3 Park and listings.

Fig. 1 A Govilon roof drawn in section, with valley, stack and wall head numbered.

Callout 1 of 3

A tall slate roof, originally M-shaped

Cadw's listing for Govilon House, Grade II (record 17249, listed on 15 March 1996), records a "Tall slate roof, originally M-shaped, with cement-rendered chimney stacks to the rear pitch serving fireplaces on the cross wall". An M-shaped roof is a pair of pitched roofs built side by side, so a valley, the internal gutter where two slopes meet, runs between the ridges. The word "originally" suggests the form may have changed, and we read what stands up there now before anything is priced.

A valley collects the rainfall of two slopes and sends it to one outlet, which makes it the hardest-working line on the roof. It is normally lined in lead. In Royston Lead's table the pitched valley gutter use is marked against Codes 4 to 8, so more than one thickness can serve, and the choice follows the width of the valley and the length of the run. MyJobQuote says correctly installed lead flashing "can last for over 80 years", but that hedge is about flashings, and a valley laid too thin can fail well before that.

We lift the slates either side of a valley edge to read the lead beneath. We look for splits along the fold, for lead that has slid downhill, for slates cut short at the edge and for leaves heaped at the outlet. Behind the valley, the underlay and battens deserve a look as well: the underlay is the membrane under the slates, and the battens are the strips of timber that carry each slate. On a roof this tall, both are examined from the loft and again from the slope. Every finding is photographed, so you can compare the fault with the repair.

Welsh rules apply to a re-cover. The Welsh Government's roof page says approval is needed if you are "replacing/ repairing more than 25 per cent of the roof area", in which case "the roof thermal insulation would normally have to be improved". Monmouthshire County Council Building Control looks after that side, and the National Park Authority looks after planning. Our pitched roofing page explains how slopes, valleys and ridges fit together.

The valley line of an M-shaped roof

SoundLead lying flat, edges clear, outlet open
Needs workSplit fold, heaped debris, slates cut short at the edge

The valley takes the rain of two slopes, so it is read twice.

Callout 2 of 3

Cement-rendered stacks above the cross wall

The listing places the cement-rendered stacks on the rear pitch, serving fireplaces on the cross wall. A stack is a brick or stone tower with weather of its own: it stands clear of the roof, so rain and wind arrive from every direction. Render is a coat of cement over the masonry, and once it cracks or sounds hollow it lets water in behind. We tap the render for hollow patches, look for hairline cracks and check the pots. Nobody sees the crown of a stack from the garden, so we photograph each face and the crown and send the pictures with the report. Where render has failed, the hollow patch is cut back to sound material, the fault beneath is dealt with and the surface is made good, because a patch laid over a hollow one only hides it. Each angle shows a different face, so the photographs come from the eaves, from the slope and from the scaffold if one has gone up.

Where a stack meets the slates, lead holds the joint. Its flashing is wedged into the stack and laid over the covering, soakers tuck under each course beside it, and a back gutter takes water round the high side. Royston Lead's Code 3 is "Recommended for lead soakers only", while Codes 4 to 6 are listed for flashings. At the top, flaunching is the mortar sloped up round the pots to shed water, and it cracks when a pot moves.

Removing a chimney breast raises a larger question. The building owner serves the notice under the Party Wall etc. Act 1996, and section 3(2)(a) requires it to "be served at least two months before the date on which the proposed work will begin". Under section 5 a neighbour who sends no consent within fourteen days is deemed to have dissented, and a surveyor is then appointed. Party wall questions go to a party wall surveyor, not to building control. Inside the National Park, ask the National Park Authority before any stack is altered or taken down.

If scaffold is needed at a gable end beside the road, we arrange the licence with our scaffolder. Our chimney repairs page covers pointing, rebuilding and lead.

Parts of a rendered stack

Render
The cement coat over the brick or stone
Flaunching
The mortar collar that holds the pots
Flashing
Lead wedged in the stack, laid over the slates
Back gutter
The lead tray that turns water round the stack
Fig. 3 Chimneys, drawn close

Callout 3 of 3

Park rules, a Baptist church and listed cottages

Govilon lies inside the Bannau Brycheiniog National Park, which was designated in 1955, so planning belongs to the National Park Authority while building control stays with Monmouthshire County Council. In Wales that makes the village article 1(5) land, where permitted development does not cover new roof lights or dormers. Our planning guide for roof windows sets out the rules. For anything beyond a like-for-like repair, check with the National Park Authority before you commit to a design.

The Abergavenny conservation area nearby is Monmouthshire County Council's, since that town lies outside the Park. For a Govilon address, ask Bannau Brycheiniog National Park Authority which conservation areas and Article 4 directions apply before you plan any alteration to how the roof looks.

Listings come next. Llanwenarth Baptist Church is Grade II* (record 14933, listed on 21 October 1994), and Chapel Cottages, the first of two listings by that name, is Grade II (record 14929, listed on 19 October 1994). Under the Historic Environment (Wales) Act 2023, section 88 and section 89, works that affect a listed building's character need listed building consent, and that has applied since 4 November 2024. A Baptist church is exempt only where it is owned by, or held in trust for, the Baptist Union Corporation Limited or the Welsh Baptist Union Corporation Limited, and then only for works by or for the church body. Otherwise works that affect its character need the consent, and the same holds for the listed cottages. Govilon House, Grade II, is listed as well, so work that would change its slate roof or the stacks on its cross wall goes through the same consent. Even a like-for-like slate repair is talked through with the Authority first, with photographs of the existing slates, the lead and the render attached.

On the building control side, the Welsh Government says the Building Safety Regulator regulates registered building control approvers in Wales, while "Local authorities are regulated by the Welsh Ministers". Our listed and heritage roofing page describes how we prepare for a listed roof.

Words you will meet in Govilon

Article 1(5) land
Welsh land where permitted development is narrower, including National Parks
Listed building consent
Permission to alter a listed building in Wales
Cross wall
An internal wall that carries fireplaces and stacks
Valley
The internal gutter where two slopes meet

Govilon roofs: valleys, stacks and the Park

What does a tall M-shaped roof like Govilon House need checked before re-slating?

Three things come first: the valley between the two ridges, the lead and slates along its edges, and the timber beneath. Cadw's listing records the roof as tall, slate and originally M-shaped, so we assume nothing about what has been altered. We lift slates either side of the valley, photograph the lead and the rafters, then write down for you whether mending the roof or covering it afresh makes better sense for the house.

Can I fit a roof light on a Govilon roof inside the National Park?

Not as permitted development. Inside a National Park in Wales, new roof lights and dormers need planning permission from the National Park Authority. Building Regulations come into it too: the Welsh Government says approval "will generally be needed for the installation of a new rooflight", and Table 4.1 of the Welsh Approved Document L holds roof windows to 1.4 or WER Band B and rooflights to 2.2. Talk to the Authority first, before a window is ordered, and we will fit the window to the answer.

Who must be told before a Govilon chimney breast is cut away?

The building owner serves the party wall notice on the neighbour, and the neighbour then has fourteen days to consent before a dispute is deemed to exist. Building control is a separate step, taken with Monmouthshire County Council or a registered building control approver. MyJobQuote gives removing a chimney breast as around £2,500, and a whole stack with its breast as £3,000 to £3,500.

Does roof work on Llanwenarth Baptist Church need listed building consent?

It depends on who holds the building. Under the Welsh exempt list, a Baptist church is exempt only if the Baptist Union Corporation Limited or the Welsh Baptist Union Corporation Limited owns it or holds it in trust, and only for works by or for the church body. Any other holder needs listed building consent under the 2023 Act. Whoever governs the church can say which applies. The route for any application is then confirmed with the National Park Authority, because the Park covers Govilon.

A storm has lifted slates in Govilon: what should I tell my insurer?

Tell the insurer before permanent repairs, have the roof made safe with a temporary repair if needed, and keep photos and receipts. The Financial Ombudsman Service says it usually looks at "expert reports and photos", and that "Rain, hail or snowfall by itself can constitute a storm". We photograph the damage as we find it, before anything is moved, and the report can go to your insurer along with your own pictures.

What if a Govilon garage roof turns out to be asbestos cement?

HSE's A14 guidance states "AC roofs are always fragile". HSE lists asbestos cement "carefully handled/removed without breaking up" as non-licensed work, while material substantially broken up is notifiable non-licensed work. MyJobQuote gives asbestos roof removal as around £2,750 and a 20 m² garage roof as around £1,200. Natural Resources Wales states that "contractors moving asbestos from a domestic property will need to use consignment notes", and in Wales carriers register with it.

Ask for a valley-first survey in Govilon

A snap of the roof or the stack is enough to start. The survey comes first and the price follows as one written total.

10-year workmanship guarantee, in writing