Callout 1 of 3
Ridge stack and end stack on Church Street
Cadw's listing description of 12 Church Street (Grade II, Cadw record 9371) records: "Slate roof, brick ridge stack to right of centre, left end stack, rubble with three diagonally-set brick uppers with oversailing courses". That is two stacks, and one of them stands on the ridge itself. It shapes the survey, because a stack on the ridge line interrupts the capping tiles, and the caps either side must finish cleanly against the brick.
Capping tiles are the ones that straddle the top of the roof. Each cap sits on a mortar bed or on a dry-fix clip, and in both cases we rock it by hand and press along the joints for crumbling. Marley's tile guidance states that installing to BS 5534 "isn't required by law", and on mortar it says the material "could no longer be relied upon as the only means of securing the roof covering". Mortar is not banned. A mortar bed by itself is simply no longer trusted to hold a cap through winter gales, so a rebedded ridge here gets a mechanical fixing too.
The listing's oversailing courses are rows of brick that step out beyond the row beneath. They throw rain clear of the shaft, and a joint that opens up there can let a brick work loose. We look at them from a ladder or a scaffold, photograph what we see and tell you whether any brick should come down and be relaid. An end stack grows out of a gable wall, so the lead along its slope side needs the same scrutiny as the ridge caps beside the ridge stack.
Where one failing stack or a short length of ridge is the whole problem, the repair is a small job and the report will describe it as one. Our roof repairs page explains how smaller jobs are run, from the first photographs to the clearing of the site afterwards. Skipping straight to a new roof would cost you far more than the fault deserves. A photograph taken along the ridge shows each cap in turn, so you can judge the repair against the picture and not against our word alone.
Ridge and stack details we record
- Capping tiles
- Rocked by hand; loose caps marked in the photographs
- Ridge mortar
- Crumbled, cracked or missing joints noted
- Fixings
- Whether each cap is held mechanically as well
- Stack courses
- Oversailing brick tapped for movement
- Lead at the stack
- Seen on all faces, split or lifted runs marked
A stack on the ridge line changes how the capping has to be finished.















