Callout 1 of 3
Hip tiles and the ridge on a hipped roof
The Victoria County History of Worcestershire, published in 1924, describes the old manor house beside the church in Eldersfield as "a two-story brick house with a red tiled hipped roof". It is one building, and it says nothing about the house you own, but it gives us the roof shape for our first callout. A hipped roof slopes down on every side with no gable, so its sloping outer corners, the hips, reach down from the ridge line to the overhang at the eaves, and each hip carries a line of capping tiles bedded in mortar or held by clips and screws.
Hips come first on the survey because three planes meet there: two slopes and the capping that closes the gap between them. At the foot of a hip, a hip iron, a small metal bracket, can stop the bottom tile from creeping down. We check that the iron is present and not rusted through, that no hip tile rocks under a gloved hand, and that the mortar bed still touches tile and slope alike. We do the same along the ridge, then go into the loft to see whether any daylight reaches the underside of the hip rafters.
Age tells us less than condition. Marley, the tile maker, states that "For clay roof tiles, the BRE determined a minimum life expectancy of 60 years", and that figure is for clay only. HomeBuilding lists clay tiles at "60-80 years". Both are typical ranges and neither is a promise, so we look at each tile for flaking faces, cracks and gaps instead of counting decades. A tile with a sound face and a dry back can stay; a tile that has crazed through goes, and the photograph shows you which is which.
A new covering that is heavier than the old one is a different job from a repair. The Planning Portal puts the line at 15 per cent or more: a covering that adds that much weight calls for Building Regulations approval, and that means a structural look at the rafters before any tile is ordered. Our roof replacement page covers a full re-cover, and we say plainly when a rebedded hip is the better buy.
Checked along an Eldersfield hip and ridge
- Hip tiles that rock or have lifted
- Mortar that still meets tile and slope
- A hip iron at the foot of each hip
- Ridge joints at the top of every hip
- Daylight under the hip rafters inside
On a hipped roof the hip lines are where we check the bedding twice.















